The ZyXEL GS1900-8HP v1, v2 and GS1900-10HP are all built on a similar
Realtek RTL8380M platform. Create a common DTSI in preparation for
GS1900-8HP support, and switch to the macros defined in rtl838x.dtsi.
Signed-off-by: Stijn Segers <f...@volatilesystems.org>
---
.../realtek/dts/rtl8380_zyxel_gs1900-10hp.dts | 189 +-----------------
.../realtek/dts/rtl8380_zyxel_gs1900.dtsi | 147 ++++++++++++++
2 files changed, 151 insertions(+), 185 deletions(-)
create mode 100644 target/linux/realtek/dts/rtl8380_zyxel_gs1900.dtsi
diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts
b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts
index b114cb6b5a..5c53385020 100644
--- a/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts
+++ b/target/linux/realtek/dts/rtl8380_zyxel_gs1900-10hp.dts
@@ -20,11 +20,6 @@
bootargs = "console=ttyS0,115200";
};
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x8000000>;
- };
-
gpio1: rtl8231-gpio {
status = "okay";
@@ -95,192 +90,16 @@
};
-&spi0 {
- status = "okay";
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x40000>;
- read-only;
- };
- partition@40000 {
- label = "u-boot-env";
- reg = <0x40000 0x10000>;
- read-only;
- };
- partition@50000 {
- label = "u-boot-env2";
- reg = <0x50000 0x10000>;
- read-only;
- };
- partition@60000 {
- label = "jffs";
- reg = <0x60000 0x100000>;
- };
- partition@160000 {
- label = "jffs2";
- reg = <0x160000 0x100000>;
- };
- partition@b260000 {
- label = "firmware";
- reg = <0x260000 0x6d0000>;
- compatible = "denx,uimage";
- };
- partition@930000 {
- label = "runtime2";
- reg = <0x930000 0x6d0000>;
- };
- };
- };
-};
-
ðernet0 {
mdio: mdio-bus {
- compatible = "realtek,rtl838x-mdio";
- regmap = <ðernet0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* Internal phy */
- phy8: ethernet-phy@8 {
- reg = <8>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
- phy9: ethernet-phy@9 {
- reg = <9>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
- phy10: ethernet-phy@10 {
- reg = <10>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
- phy11: ethernet-phy@11 {
- reg = <11>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
- phy12: ethernet-phy@12 {
- reg = <12>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
- phy13: ethernet-phy@13 {
- reg = <13>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
- phy14: ethernet-phy@14 {
- reg = <14>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
- phy15: ethernet-phy@15 {
- reg = <15>;
- compatible = "ethernet-phy-ieee802.3-c22";
- };
- phy24: ethernet-phy@24 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <24>;
- };
- phy26: ethernet-phy@26 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <26>;
- };
+ INTERNAL_PHY(24)
+ INTERNAL_PHY(26)
};
};
&switch0 {
ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <8>;
- label = "lan1";
- phy-handle = <&phy8>;
- phy-mode = "internal";
- };
- port@1 {
- reg = <9>;
- label = "lan2";
- phy-handle = <&phy9>;
- phy-mode = "internal";
- };
- port@2 {
- reg = <10>;
- label = "lan3";
- phy-handle = <&phy10>;
- phy-mode = "internal";
- };
- port@3 {
- reg = <11>;
- label = "lan4";
- phy-handle = <&phy11>;
- phy-mode = "internal";
- };
- port@4 {
- reg = <12>;
- label = "lan5";
- phy-handle = <&phy12>;
- phy-mode = "internal";
- };
- port@5 {
- reg = <13>;
- label = "lan6";
- phy-handle = <&phy13>;
- phy-mode = "internal";
- };
- port@6 {
- reg = <14>;
- label = "lan7";
- phy-handle = <&phy14>;
- phy-mode = "internal";
- };
- port@7 {
- reg = <15>;
- label = "lan8";
- phy-handle = <&phy15>;
- phy-mode = "internal";
- };
- port@24 {
- reg = <24>;
- label = "lan9";
- phy-mode = "rgmii-id";
- phy-handle = <&phy24>;
- sfp = <&sfp0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
- port@26 {
- reg = <26>;
- label = "lan10";
- phy-mode = "rgmii-id";
- phy-handle = <&phy26>;
- sfp = <&sfp1>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
- port@28 {
- ethernet = <ðernet0>;
- reg = <28>;
- phy-mode = "internal";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
+ SWITCH_SFP_PORT(24, 9, rgmii-id)
+ SWITCH_SFP_PORT(26, 10, rgmii-id)
};
};
diff --git a/target/linux/realtek/dts/rtl8380_zyxel_gs1900.dtsi
b/target/linux/realtek/dts/rtl8380_zyxel_gs1900.dtsi
new file mode 100644
index 0000000000..2e2d0bfc8f
--- /dev/null
+++ b/target/linux/realtek/dts/rtl8380_zyxel_gs1900.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "rtl838x.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ aliases {
+ led-boot = &led_sys;
+ led-failsafe = &led_sys;
+ led-running = &led_sys;
+ led-upgrade = &led_sys;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ gpio1: rtl8231-gpio {
+ status = "okay";
+
+ poe_enable {
+ gpio-hog;
+ gpios = <13 0>;
+ output-high;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_sys: sys {
+ label = "gs1900:green:sys";
+ gpios = <&gpio0 47 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+};
+
+&spi0 {
+ status = "okay";
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+ partition@50000 {
+ label = "u-boot-env2";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+ partition@60000 {
+ label = "jffs";
+ reg = <0x60000 0x100000>;
+ };
+ partition@160000 {
+ label = "jffs2";
+ reg = <0x160000 0x100000>;
+ };
+ partition@b260000 {
+ label = "firmware";
+ reg = <0x260000 0x6d0000>;
+ compatible = "denx,uimage";
+ };
+ partition@930000 {
+ label = "runtime2";
+ reg = <0x930000 0x6d0000>;
+ };
+ };
+ };
+};
+
+ðernet0 {
+ mdio: mdio-bus {
+ compatible = "realtek,rtl838x-mdio";
+ regmap = <ðernet0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ INTERNAL_PHY(8)
+ INTERNAL_PHY(9)
+ INTERNAL_PHY(10)
+ INTERNAL_PHY(11)
+ INTERNAL_PHY(12)
+ INTERNAL_PHY(13)
+ INTERNAL_PHY(14)
+ INTERNAL_PHY(15)
+ };
+};
+
+&switch0 {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ SWITCH_PORT(8, 1, internal)
+ SWITCH_PORT(9, 2, internal)
+ SWITCH_PORT(10, 3, internal)
+ SWITCH_PORT(11, 4, internal)
+ SWITCH_PORT(12, 5, internal)
+ SWITCH_PORT(13, 6, internal)
+ SWITCH_PORT(14, 7, internal)
+ SWITCH_PORT(15, 8, internal)
+
+ port@28 {
+ ethernet = <ðernet0>;
+ reg = <28>;
+ phy-mode = "internal";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+};
--
2.20.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
