Hello,
lantiq does however use MIPS as a core. the board are available of ebay
for very little, i have been testing on DT Speedport w501V and w303V,
both of which i got for less than 10 euro.
That sounds really cool if OpenWRT can run on w501v.
With best regards
Christoph
--
Linux User
hi folks,
i was cross compiling expect 5.45 latest from source forge to the
kamikaze. but was getting to problems. i had done tcl compilation, as
expect depends on tcl.
any idea why the h*ck the following error comes??
Hi,
I have just pushed owsip-R1 into trunk.
owsip is a minimalist sip client, based on the pjsip library that allows
us to make real voice calls on lantiq hardware using the FXS ports.
currently basic features are supported
* answering/making calls
* short dial
* multiple accounts
* proxy/stun
That is correct, but I could imagine he (and others) are confused by the
fact that the buildroot does not generate a pico-m image, just a bullet-,
nano-m, and a rocket-m. The bullet-m image will work on the pico-m, but
there is nothing that tells users.
Another 'not-so-nice-thing' by the way is
applied in #30532,
thx
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Al 14/02/12 11:43, En/na Ithamar R. Adema ha escrit:
If ARM isn't a hard requirement I'd take a look at the Infineon/Lantiq
solutions, they support/are supported by OpenWRT and are commonly used for
routers with FXS features.
The problem is, the voice firmware available with openwrt is out
2012.02.11. 23:06 keltezéssel, Roman Yeryomin írta:
On 11 February 2012 19:12, Gabor Juhos juh...@openwrt.org wrote:
2012.02.01. 3:19 keltezéssel, Roman Yeryomin írta:
This fixes Belkin F5D8235 v2 ethernet stuff.
To do it we first need to enable rgmii and then not to configure any
vlans at
The problem is, the voice firmware available with openwrt is out of date (the
driver complains it's too old) and it crashes
the CID feature on the 2nd voice channel causes a crash in svd. inside
owsip this crash does not happen
, and there's no publicly available documentation (though one
Kaspar:
I recall that digium supplies linux-based device drivers for all their
products.
John
On Tue, Feb 14, 2012 at 5:26 AM, Kaspar Schleiser
kaspar+open...@schleiser.de wrote:
Hello,
I'm working on a project for a large Telco. We're evaluating development
hardware for building a router.
Bumping gcc to 4.6 revealed some incompatibilities between the current
collectd 4.10.2 and gcc 4.6. See: https://dev.openwrt.org/ticket/10962
After Jow had fixed those compiler directives, I noticed that the underlying
reasons had already been fixed upstream in the collectd source code.
Here
Al 14/02/12 20:31, En/na John Crispin ha escrit:
The problem is, the voice firmware available with openwrt is out of date
(the driver complains it's too old) and it crashes
the CID feature on the 2nd voice channel causes a crash in svd. inside
owsip this crash does not happen
Hello, I
A look on freetz could be worth. They modify the original firmware which is
shipped out by the manufacturers, avm fritzboxes. Maybe they have some
stuff concerning the fxs.
Me own a dt w501v too. But i think its out of date, cuz of low rom\ram.
I'm also intrested in a platform with fxs, dsl and
Al 14/02/12 23:42, En/na Luca Olivetti ha escrit:
Al 14/02/12 20:31, En/na John Crispin ha escrit:
The problem is, the voice firmware available with openwrt is out of date
(the driver complains it's too old) and it crashes
the CID feature on the 2nd voice channel causes a crash in svd.
On 14/02/12 23:42, Luca Olivetti wrote:
Al 14/02/12 20:31, En/na John Crispin ha escrit:
The problem is, the voice firmware available with openwrt is out of date
(the driver complains it's too old) and it crashes
the CID feature on the 2nd voice channel causes a crash in svd. inside
owsip
On 14/02/12 23:57, Luca Olivetti wrote:
Al 14/02/12 23:42, En/na Luca Olivetti ha escrit:
Al 14/02/12 20:31, En/na John Crispin ha escrit:
The problem is, the voice firmware available with openwrt is out of date
(the driver complains it's too old) and it crashes
the CID feature on the 2nd
Al 14/02/12 20:39, En/na Luka Perkov ha escrit:
In TAPI sources in OpenWrt is nice documentation, you only need doxygen
to build it.
Doxygen documentation is only useful as a complement to proper documentation
(which exists but it's not publicly available).
The difference is like night and
On 14/02/12 23:57, Luca Olivetti wrote:
Al 14/02/12 23:42, En/na Luca Olivetti ha escrit:
Al 14/02/12 20:31, En/na John Crispin ha escrit:
The problem is, the voice firmware available with openwrt is out of date
(the driver complains it's too old) and it crashes
the CID feature on the 2nd
Do you got openwrt running on the w501v?
Am 15.02.2012 00:01 schrieb John Crispin j...@phrozen.org:
On 14/02/12 23:57, Luca Olivetti wrote:
Al 14/02/12 23:42, En/na Luca Olivetti ha escrit:
Al 14/02/12 20:31, En/na John Crispin ha escrit:
The problem is, the voice firmware available with
On 2/11/12 1:30 PM, Philip Prindeville wrote:
On 2/11/12 3:21 AM, Russell Senior wrote:
What kind of bounty are you talking about?
Not sure. I'd need to know the extent of the work involved before I could say.
Last time I tried sysupgrade on an alix it panicked the system and corrupted
The CMake template Build/Configure/Default assumes that CMakeLists.txt is
always in $(PKG_BUILD_DIR) , which leads to problems with packages which
have their source code in a subdirectory.
Fix this by honouring the value of $(MAKE_PATH) , similar to the generic
Build/Compile/Default .
Oops, discovered too late there's a CONFIGURE_PATH ...
Resending.
--Alain
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
The CMake template Build/Configure/Default assumes that CMakeLists.txt is
always in $(PKG_BUILD_DIR) , which leads to problems with packages which
have their source code in a subdirectory.
Fix this by honouring the value of $(CONFIGURE_PATH) , similar to the generic
Build/Configure/Default .
Patch for fixed point in libfaad2.
Dont know if is the most appropiate way of passing the argument.
Dont know if patch is well done. First time. Work for me though.
Can listen to BBC 3 (AAC) with mpd. CPU usage is good.
--
--- a/package/feeds/packages/faad2/Makefile
+++
Artur,
Op 14-02-12 03:46, Artur Twarecki schreef:
This adds packages libhdhomerun and hdhomerun_config.
Signed-off-by: Artur Twareckiopenwrt at twarecki.ca
Index: package/libhdhomerun/Makefile
===
---
Op 15-02-12 07:38, Alain Kalker schreef:
Please also install the header files (there are a lot of them, and
hdhomerun.h includes almost all of the others) so I would like to
suggest using a subdirectory) and the shared library in the staging
dir, so other packages (like dvbhdhomerun, which I
25 matches
Mail list logo
