Hi,
On 10/07/2014 22:17, Cezary Jackiewicz wrote:
Index:
target/linux/ar71xx/patches-3.10/700-MIPS-ath79-add-TL-WA801NDv2-suport.patch
700
already exists. please also verify the other patch names and then
resend the patch
John
___
Hi,
had to look up if i missed the newest trend but i did not ... :)
https://www.kernel.org/doc/Documentation/SubmittingPatches
quote
The sign-off is a simple line at the end of the explanation for the
patch, which certifies that you wrote it or otherwise have the right to
pass it on as an
Hi,
can you use brcm2708: int he subject next time ?
git am strips [foo] from the subject
John
On 04/07/2014 14:29, Álvaro Fernández Rojas wrote:
By using uci-defaults force_link is enabled, which fixes some link
issues if ethernet cable isn't connected when LAN is initialized.
Hello,
I'm sorry John, I do not understand what you mean, with your comment.
/Fjonson
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
On 12/07/2014 11:20, Fredrik Jonson wrote:
Hello,
I'm sorry John, I do not understand what you mean, with your
comment.
/Fjonson ___
openwrt-devel mailing list openwrt-devel@lists.openwrt.org
Generate the configuration file for uboot-envtools
on BTHOMEHUBV2B. Adds the specific parameters for the
BTHOMEHUBV2B and also fixes an incorrect path which
would have affected other lantiq boards as well
(currently only the GIGASX76X).
Signed-off-by: Ben Mulvihill ben.mulvih...@gmail.com
---
Main goals of this series:
* Simplify interface between arch code and SoC drivers
* Simplify internal realization of arch code
* Make code consistent with mainstream kernel rules and practice
Sergey Ryazanov (17):
atheros[ar2315-wdt]: rename config symbol
atheros: use correct address space
Pass reset_set and reset_clear callback functions pointers via
platform_data instead of reset register address.
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
target/linux/atheros/patches-3.10/100-board.patch | 49 ++
Rename config symbol to AR2315_WDT to avoid confusion with other Atheros
SoCs.
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
target/linux/atheros/config-3.10 | 2 +-
target/linux/atheros/patches-3.10/130-watchdog.patch | 11 ++-
2 files changed, 7
UART IRQ number could be different for different SoCs, so make them
configurable.
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
target/linux/atheros/patches-3.10/100-board.patch | 16 +---
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git
Make sparse happy :)
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
target/linux/atheros/patches-3.10/100-board.patch | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/target/linux/atheros/patches-3.10/100-board.patch
Move driver code to respective vendor subdirectory and fix config
symbol name.
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
target/linux/atheros/config-3.10 | 2 +-
.../atheros/patches-3.10/110-ar2313_ethernet.patch | 59 +++---
* Pass iomem and IRQ via platform device resources
* Remap iomem and use iowrite32 accessor function
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
target/linux/atheros/patches-3.10/100-board.patch | 17 +++-
.../linux/atheros/patches-3.10/130-watchdog.patch | 45
Acknowledge watchdog interrupt in arch irq dispatcher and remove odd
watchdog enable call from probe function.
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
target/linux/atheros/patches-3.10/100-board.patch| 7 ---
target/linux/atheros/patches-3.10/130-watchdog.patch | 5
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
target/linux/atheros/patches-3.10/100-board.patch | 34 +++---
.../atheros/patches-3.10/105-ar2315_pci.patch | 6 ++--
2 files changed, 14 insertions(+), 26 deletions(-)
diff --git
Currently AR5312 misc IRQ numbers are used for AR2315+ chips, what cause
us to use switch-case to map IRQ number to ISR bit. Introduce AR2315
specific misc IRQs set and simplify interrupt (un)mask operation.
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
Align code with AR5312 realization.
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
target/linux/atheros/patches-3.10/100-board.patch | 47 --
.../atheros/patches-3.10/105-ar2315_pci.patch | 15 +++
2 files changed, 34 insertions(+), 28 deletions(-)
diff
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
target/linux/atheros/patches-3.10/100-board.patch| 20 ++--
.../atheros/patches-3.10/110-ar2313_ethernet.patch | 19 ---
.../patches-3.10/220-enet_micrel_workaround.patch| 6 +++---
3 files
Use 32-bit aligned I/O and update base UART address (remove +3 offset).
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
target/linux/atheros/patches-3.10/100-board.patch| 6 +++---
target/linux/atheros/patches-3.10/101-early-printk-support.patch | 4 ++--
2 files
Pass PHY I/O memory region via platform resources and remap them
unconditionally.
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
target/linux/atheros/patches-3.10/100-board.patch | 57 ++
.../atheros/patches-3.10/110-ar2313_ethernet.patch | 48 +++---
Each SoCs generation has own independent gpiolib realization, so we
have no reason to keep these realizations in semiuniversal form.
Following modifications are made:
* Remove valid_mask field
* Remove ar231x_gpio_chip structure
* Rename AR2315_GPIO_CR to AR2315_GPIO_DIR
* Fix count of AR5312
Rename interrupt control handlers to be consistent with operation names
and add IRQ chips names.
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
target/linux/atheros/patches-3.10/100-board.patch | 45 ---
1 file changed, 24 insertions(+), 21 deletions(-)
diff --git
Pass only physical address to 8250 serial port driver and set flag to
remap I/O memory inside the driver. Also fix AR5312 UART base address
definition, which seems specified already mapped.
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
---
Use AR2315_ prefix for macroses specific to AR2315/AR2316/AR2317 chips,
use AR5312_ prefix for macroses specific to AR5312/AR2312/AR2313 chips,
and use AR231X_ prefix for common macroses.
This patch should not cause any functional changes, only make clear
which macros is common and which macros
Corrected patch ath79 insted of auth79. Sorry.
Signed-off-by: Fredrik Jonson fred...@famjonson.se
---
target/linux/ar71xx/base-files/etc/diag.sh | 1 +
.../ar71xx/base-files/etc/uci-defaults/01_leds | 5 +
.../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
2014-07-12 17:33 GMT+04:00 Sergey Ryazanov ryazanov@gmail.com:
Main goals of this series:
* Simplify interface between arch code and SoC drivers
* Simplify internal realization of arch code
* Make code consistent with mainstream kernel rules and practice
Forgot to say, that this series
I'm having an issue with OpenWRT trunk where it seems that SMP (Symmetric
MultiProcessing) is marked as being Broken, for the IXP4xx arch and I'm
trying to compile netmap http://info.iet.unipi.it/~luigi/netmap/ for the
Cambria SBC. Netmap requires the kernel to have SMP active.
Can anyone tell me
On 2014-07-12 15:33, Sergey Ryazanov wrote:
Pass PHY I/O memory region via platform resources and remap them
unconditionally.
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
diff --git a/target/linux/atheros/patches-3.10/110-ar2313_ethernet.patch
On 2014-07-12 16:29, Carlos Ferreira wrote:
I'm having an issue with OpenWRT trunk where it seems
that SMP (Symmetric MultiProcessing) is marked as being Broken, for the
IXP4xx arch and I'm trying to compile netmap
http://info.iet.unipi.it/~luigi/netmap/ for the Cambria SBC. Netmap
requires
Yes I know that, but the thing is, for the 3.10 kernel, CONFIG_RPS depends
on CONFIG_SMP.
CONFIG_RPS enables the definition of real_num_rx_queues field for the
netdev_rx_queue struct (netdevice.h). Netmap requires the existence of the
real_num_rx_queues field. I cannot compile it CONFIG_RPS is
On 2014-07-12 16:51, Carlos Ferreira wrote:
Yes I know that, but the thing is, for the 3.10 kernel, CONFIG_RPS
depends on CONFIG_SMP.
CONFIG_RPS enables the definition of real_num_rx_queues field for the
netdev_rx_queue struct (netdevice.h). Netmap requires the existence of
the
Well, like I said, beyond Linux 3.14 kernel version, the field is defined
if CONFIG_SYSFS is active.
I will contact the netmap developers to see if they are available to update
the source.
On 12 July 2014 15:58, Felix Fietkau n...@openwrt.org wrote:
On 2014-07-12 16:51, Carlos Ferreira wrote:
2014-07-12 18:37 GMT+04:00 Felix Fietkau n...@openwrt.org:
On 2014-07-12 15:33, Sergey Ryazanov wrote:
Pass PHY I/O memory region via platform resources and remap them
unconditionally.
Signed-off-by: Sergey Ryazanov ryazanov@gmail.com
diff --git
Hi devs,
after listening to Amp Hour podcast ep 202 [1], interview With Brandon
Harris from Electric Imp, which was impressive I heard something
really alarming.
Whey were using Lua in their product previous to launch, but they were
so strongly againgst shipping it with Lua because they realized
Signed-off-by: Álvaro Fernández Rojas nolt...@gmail.com
Signed off by: José Vázquez Fernández ppvazquez...@gmail.com
---
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index a04f4a5..1d42d47 100755
---
Signed-off-by: Álvaro Fernández Rojas nolt...@gmail.com
Signed off by: José Vázquez Fernández ppvazquez...@gmail.com
---
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index 1d42d47..aa32099 100755
---
Signed-off-by: Álvaro Fernández Rojas nolt...@gmail.com
---
diff --git a/tools/firmware-utils/Makefile b/tools/firmware-utils/Makefile
index 64eccdd..d5cfdaa 100644
--- a/tools/firmware-utils/Makefile
+++ b/tools/firmware-utils/Makefile
@@ -49,6 +49,7 @@ define Host/Compile
$(call
Signed-off-by: Álvaro Fernández Rojas nolt...@gmail.com
---
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index aa32099..964f5ba 100755
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++
On 12 July 2014 23:13, valent.turko...@gmail.com
valent.turko...@gmail.com wrote:
They found Squirrel [2], so first question that popped into my mind
was - is there Squirrel for OpenWrt. And from what I have seen so far
there is not.
Has anybody used Squirrel? Would it make sense to look into
I have been trying to simplify my babel setup. I have
8 /27s out of a single /24 that I would like not
to have to expose to the universe.
I have 172.21.2.0/27, 172.21.2.64/27 etc
on each of the 8 devices I have.
But there is no need to export each /27, as these
are out of a single /24.
The way
Hello,
On Sat, 12 Jul 2014 23:13:37 +0200
valent.turko...@gmail.com valent.turko...@gmail.com wrote:
Hi devs,
after listening to Amp Hour podcast ep 202 [1], interview With Brandon
Harris from Electric Imp, which was impressive I heard something
really alarming.
Whey were using Lua in
On 12/07/14 20:10, Dave Taht wrote:
I have been trying to simplify my babel setup. I have
8 /27s out of a single /24 that I would like not
to have to expose to the universe.
I have 172.21.2.0/27, 172.21.2.64/27 etc
on each of the 8 devices I have.
But there is no need to export each /27,
42 matches
Mail list logo