On 2015-01-25 04:45, Robert Hancock wrote:
Add some missing 802.11n capabilities to the hostapd ht_capab string when
supported by the hardware: Spatial Multiplexing Power-Save,
Delayed Block Ack, and 7935-byte AMSDUs.
Signed-off-by: Robert Hancock hancock...@gmail.com
No driver actually does
Backport r43990 to Barrier Breaker.
http://wiki.openwrt.org/toh/kingston/mlwg2
Signed-off-by: L. D. Pinney ldpin...@gmail.com
target/linux/ramips/base-files/etc/diag.sh | 3 +++
target/linux/ramips/base-files/etc/uci-defaults/01_leds| 4 +++
Hi,
On Fri, Jan 23, 2015 at 01:57:44PM +0100, Imre Kaloz wrote:
On Thu, 22 Jan 2015 11:33:14 +0100, Maxime Ripard
maxime.rip...@free-electrons.com wrote:
Hi,
On Wed, Jan 14, 2015 at 01:37:37PM +0100, Maxime Ripard wrote:
On Wed, Jan 14, 2015 at 12:43:25PM +0100, Rafał Miłecki wrote:
On
Signed-off-by: Álvaro Fernández Rojas nolt...@gmail.com
---
diff --git
a/target/linux/brcm63xx/patches-3.14/374-GPIO-generic-pdata-add-label-backport.patch
b/target/linux/brcm63xx/patches-3.14/374-GPIO-generic-pdata-add-label-backport.patch
new file mode 100644
index 000..cba5a0a
---
On Wed, Dec 17, 2014 at 1:48 PM, Heiner Kallweit hkallwe...@gmail.com wrote:
Ticket 18415 was closed as it was confirmed that as at least version =43419
is ok.
(I assume 43410 fixed the issue.) Therefore current trunk should be ok.
However if you want to check further what the actual root
Signed-off-by: Álvaro Fernández Rojas nolt...@gmail.com
---
diff --git a/target/linux/brcm63xx/config-3.14
b/target/linux/brcm63xx/config-3.14
index dd27f47..a5c1721 100644
--- a/target/linux/brcm63xx/config-3.14
+++ b/target/linux/brcm63xx/config-3.14
@@ -76,7 +76,10 @@ CONFIG_GENERIC_IRQ_SHOW=y
Signed-off-by: Álvaro Fernández Rojas nolt...@gmail.com
---
diff --git
a/target/linux/brcm63xx/patches-3.14/378-DT-SPI-GPIO-no-cs-backport.patch
b/target/linux/brcm63xx/patches-3.14/378-DT-SPI-GPIO-no-cs-backport.patch
new file mode 100644
index 000..57b66eb
--- /dev/null
+++
Signed-off-by: Álvaro Fernández Rojas nolt...@gmail.com
---
diff --git
a/target/linux/brcm63xx/patches-3.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch
b/target/linux/brcm63xx/patches-3.14/320-irqchip-add-support-for-bcm6345-style-periphery-irq-.patch
index 2fd1568..8219c98
Signed-off-by: Álvaro Fernández Rojas nolt...@gmail.com
---
diff --git a/target/linux/brcm63xx/patches-3.14/377-DT-GPIO-over-legacy.patch
b/target/linux/brcm63xx/patches-3.14/377-DT-GPIO-over-legacy.patch
new file mode 100644
index 000..f56c8ca
--- /dev/null
+++
Hi Nathan,
On Fri, Jan 23, 2015 at 09:20:01PM -0800, Nathan Hintz wrote:
Signed-off-by: Nathan Hintz nlhi...@hotmail.com
---
target/linux/kirkwood/profiles/120-plug.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Applied in r44125. Thank you!
Luka
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/network/services/hostapd/files/hostapd.sh | 29 ++
package/network/services/hostapd/files/netifd.sh | 37 ++-
2 files changed, 65 insertions(+), 1 deletion(-)
diff --git
The ubootloader of the M2M sets the reset bits for
both USB device and USB host during initialization
(to save a few mA of power during boot).
However, for the usb-sata bridge to be properly
detected, it is necessary to clear both reset bits
as otherwise the kernel logs will just be filled
with:
From 9dc6a27ba327a6f4ff5892c56c472d857d6ea096 Mon Sep 17 00:00:00 2001
From: W. Michael Petullo m...@flyn.org
Date: Mon, 26 Jan 2015 00:01:34 -0500
Subject: [PATCH] kernel: add support for NFSv4
To: openwrt-devel@lists.openwrt.org
This work is based on Daniel Colascione's submission to the
Add some missing 802.11n capabilities to the hostapd ht_capab string when
supported by the hardware: Spatial Multiplexing Power-Save and 7935-byte AMSDUs.
Signed-off-by: Robert Hancock hancock...@gmail.com
---
package/kernel/mac80211/files/lib/netifd/wireless/mac80211.sh | 11 +++
1 file
To me it doesn't look like an issue with the AR8216 driver. All related output
is ok.
The hardware is quite common and in case of a driver issue I would expect much
more
people to complain.
What looks a little strange to me is that there seem to be two interfaces
(modem + wan)
fiddling with
On 25 January 2015 at 16:17, Sylwester Petela ssc...@gmail.com wrote:
W dniu 2015-01-25 o 13:52, Antti Seppälä pisze:
After r43987 TARGET_lantiq_xrx200_P2812HNUFX does not exist anymore.
Fix empty menuconfig bootloader selection by making u-boot depend on
one of the new target profiles.
Hi Claudio,
On Fri, Jan 23, 2015 at 08:27:44PM -0500, Claudio Leite wrote:
Signed-off-by: Claudio Leite lei...@staticky.com
---
target/linux/kirkwood/profiles/115-router.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Applied in r44124. Thank you!
Luka
Hi Claudio,
On Fri, Jan 23, 2015 at 08:27:42PM -0500, Claudio Leite wrote:
Using port-based VLANs depends on a non-standard
swconfig parameter, which compilcates things like
LuCI that don't know about it. This patch changes
the default to use 802.1q VLANs internally in the
switch, but
Hi Claudio,
On Fri, Jan 23, 2015 at 08:27:43PM -0500, Claudio Leite wrote:
Previous options resulted in a nonfunctional image.
Signed-off-by: Claudio Leite lei...@staticky.com
---
target/linux/kirkwood/profiles/115-router.mk | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
W dniu 2015-01-25 o 13:52, Antti Seppälä pisze:
After r43987 TARGET_lantiq_xrx200_P2812HNUFX does not exist anymore.
Fix empty menuconfig bootloader selection by making u-boot depend on
one of the new target profiles.
Signed-off-by: Antti Seppälä a.sepp...@gmail.com
---
This patch series adds support for fast BSS transition (802.11r) to hostapd.
Only tested association with ath9k client on ath9k AP with netifd. Changes to
hostapd.sh are untested.
https://dev.openwrt.org/ticket/13187
Stijn Tintel (3):
hostapd: append nasid to config for all WPA types
To enable 802.11r, wpa_key_mgmt should contain FT-EAP or FT-PSK. Allow
multiple key management algorithms to make this possible.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
package/network/services/hostapd/files/hostapd.sh | 6 --
package/network/services/hostapd/files/netifd.sh | 6
The 802.11r implementation in hostapd uses nas_identifier as PMK-R0 Key
Holder identifier. As 802.11r can also be used with WPA Personal, nasid
should be appended to the hostapd config for all WPA types.
Signed-off-by: Stijn Tintel st...@linux-ipv6.be
---
On Jan 25, 2015 1:06 PM, Heiner Kallweit hkallwe...@gmail.com wrote:
To me it doesn't look like an issue with the AR8216 driver. All related
output is ok.
The hardware is quite common and in case of a driver issue I would expect
much more
people to complain.
What looks a little strange to me
Hi,
On Sun, 25 Jan 2015 18:06:03 +0100, Maxime Ripard
maxime.rip...@free-electrons.com wrote:
Sure, but please implement UBI on NOR as a generic solution.
What do you mean? It already works quite well (with that patch applied
and the NOR sub-profile), so I'm not sure I have to implement
Any ideas why is this happening with my account? Can you please check user
rights for wiki account valentt
Thanks.
On Mon, Jan 19, 2015 at 8:15 PM, valent.turko...@gmail.com
valent.turko...@gmail.com wrote:
Well, it is strange, but check out this message:
http://i.imgur.com/2NbQBxc.png
On
On 25 January 2015 at 21:08, Florian Fainelli flor...@openwrt.org wrote:
Le 14/01/2015 22:54, Rafał Miłecki a écrit :
I wanted bcm53xx kernels to be compiled with EARLY_PRINTK by default.
This is safe, we enable earlyprintk using bootargs on tested devices
only.
So I have config option
Le 14/01/2015 22:54, Rafał Miłecki a écrit :
I wanted bcm53xx kernels to be compiled with EARLY_PRINTK by default.
This is safe, we enable earlyprintk using bootargs on tested devices
only.
So I have config option enabled in default configs:
grep EARLY_PRINTK
Hmm, it looks like when I'm editing wiki page then probably I'm in root
folder and there I don't have permissions to upload images, but then I
choose from my account page to upload to some other folder I can upload.
Check out screenshots:
http://i.imgur.com/RbIxKsG.png
Who is Mediawiki admin? Somebody was messing about media namespaces and
blocked some namespaces so that they don't have permission to accept
uploaded images.
For example toh:tplink namespace - http://i.imgur.com/quWSV4L.png
On Sun, Jan 25, 2015 at 10:00 PM, valent.turko...@gmail.com
Hi.
As I already wrote three weeks ago, upload into the media namespace.
~ Jow
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
31 matches
Mail list logo
