Signed-off-by: Günther Kelleter guenther.kelle...@devolo.de
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 3 +
.../ar71xx/base-files/etc/uci-defaults/01_leds | 6 +
.../ar71xx/base-files/etc/uci-defaults/02_network |
Signed-off-by: Günther Kelleter guenther.kelle...@devolo.de
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 +
.../ar71xx/base-files/etc/uci-defaults/01_leds | 7 +
.../ar71xx/base-files/etc/uci-defaults/02_network | 4 +
target/linux/ar71xx/base-files/lib/ar71xx.sh |
This patch set adds support for two devolo dLAN devices:
dLAN pro 500 Wireless+
dLAN pro 1200+ Wifi ac
It supports the wireless and ethernet interfaces.
PLC support must be implemented in user space and will follow later when basic
support is finally accepted.
Changes since PATCH v3:
Signed-off-by: Günther Kelleter guenther.kelle...@devolo.de
---
.../739-MIPS-ath79-add-gpio-irq-support.patch | 224 +
1 file changed, 224 insertions(+)
create mode 100644
target/linux/ar71xx/patches-3.18/739-MIPS-ath79-add-gpio-irq-support.patch
diff --git
Added option for old firmware version (10.1 API v2). It seems that recent
firmware versions are constantly crashing (at least on a QCA9880-BR4A-R) and
this provides the option to select an older version instead.
Signed-off-by: Günther Kelleter guenther.kelle...@devolo.de
---
On 07/09/2015 04:51 PM, Firas wrote:
When I tried to compile the kernel and configure it I found only 6LoWPAN
over Bluetooth support, and I need to add 6LoWPAN to work over RF module
like Jenic JN51xx.
I’m using OpenWRT Kernel 3.18!
So how can I implement that please can you guide me
USB port of TP-Link Archer C20i does not work with trunk and CC.
This patch adds two nodes (ehci and ohci) to the device tree enabling USB.
Signed-off-by: Gunnar Thorburn gun...@thorburn.se
---
target/linux/ramips/dts/ArcherC20i.dts | 8
1 file changed, 8 insertions(+)
diff --git
On 07/09/2015 02:32 PM, Pratik Prajapati wrote:
Hi,
I want to build radvd (2.0 version) on OpenWrt but it supports radvd
1.9 version.
I have two options:
1) either configure OpenWrt to download radvd's 2.0 version instead of 1.9
or
2) disable radvd in oldpackages and create a new
From: Tom Deng 2579131...@qq.com
Adding support for OY-0001 Wireless Router.
OY-0001 is a wireless router made by oyewifi.com. Below is the details:
MT7620A, 128MB DDR2, 16MB FLASH, SD Slot, USB 2.0, 4 x LAN + 1 x WAN.
Signed-off-by: Tom Deng 2579131...@qq.com
---
diff --git
Hi Firas,
On 07/09/2015 05:52 PM, Firas wrote:
I'm using OpenWRT Kernel 3.18, and I haven't found separate support for
6LoWPAN. In this kernel there is only 6LoWPAN over Bluetooth !
6LoWPAN over IEEE-802.15.4 support available in OpenWRT from the kernel version
4.0 [1]
I want to use it
Hi,
I have to enable NAT with a MASQUERADING target,
and to block the GUI from WAN have to server bind only the bridge address.
Could anyone tell me how i can do it in the GUI itself.
Thanks Regards,
John
___
openwrt-devel mailing list
I'm sorry, i said ath9k in the subject but the above seems more likely
to be ath10k.
On Thu, Jul 9, 2015 at 7:03 PM, camden lindsay
camden.lindsay+open...@gmail.com wrote:
Hello-
Thought I should report this, since there was so much discussion and
confusion on tracker
Hello-
Thought I should report this, since there was so much discussion and
confusion on tracker https://dev.openwrt.org/ticket/11862 causing a
lot of work for some folks here.
root@HACKEDBOXII.'':~# cat /etc/banner
___ __
|
Hi guys,
Hi,
once i fixed the codec problem on my unit i will look at the bug. can
you help me get one of the rt5350 boards that you have ? can you tell
me a link the the board ?
John
I'm using toplinkst top-ap01-38 with RT5350 and trying to setup a dac codec
using i2s.
On 09/07/2015 09:59, Sergio wrote:
Hi guys,
Hi,
once i fixed the codec problem on my unit i will look at the bug. can
you help me get one of the rt5350 boards that you have ? can you tell
me a link the the board ?
John
I'm using toplinkst top-ap01-38 with RT5350 and
Hi,
minor nitpick inline
On 07/07/2015 14:58, Günther Kelleter wrote:
Signed-off-by: Günther Kelleter guenther.kelle...@devolo.de
---
.../739-MIPS-ath79-add-gpio-irq-support.patch | 225
+
1 file changed, 225 insertions(+)
create mode 100644
Hi,
this function seem to be overly complicated. do you really need this ?
John
On 07/07/2015 14:58, Günther Kelleter wrote:
+static void inc_mac_addr(u8 *base_mac, u8 *dst_mac, u8 inc)
+{
+ u32 tmp = 0;
+ char index = 6;
+
+ tmp = base_mac[5] + inc;
+ while
Am 09.07.2015 um 08:14 schrieb John Crispin:
why is this unnecessary ? do we now rely on the bootloader to have
already made the setup ?
Hi John,
I see, I couldn't find any difference in calling this function or not
from a perspective within the system (swconfig, ethtool).
Perhaps I'm just
Hi,
dont know at10k very well so pardon my uneducated question...
how does at10k know/choose which of the 2 to use ?
John
On 07/07/2015 14:58, Günther Kelleter wrote:
Added option for old firmware version (10.1 API v2). It seems that recent
firmware versions are constantly crashing
Hi
-Original Message-
From: John Crispin [mailto:blo...@openwrt.org]
Sent: Thursday, July 09, 2015 8:24 AM
To: Guenther Kelleter; openwrt-devel@lists.openwrt.org
Subject: Re: [OpenWrt-Devel] [PATCH v3 1/7] ar71xx: ag71xx: add pdata field
supported
Hi,
On 07/07/2015 14:58,
Hi,
On 07/07/2015 14:58, Günther Kelleter wrote:
to allow target specific override of phydev-supported.
why do you need to do this ? do you want to force a specific link type ?
if so, then using a fixed link would be preferable to faking phy caps
John
Signed-off-by: Günther
Hi,
see inline
On 07/07/2015 14:58, Günther Kelleter wrote:
Signed-off-by: Günther Kelleter guenther.kelle...@devolo.de
---
package/base-files/files/etc/init.d/led | 7 +++
.../base-files/files/lib/functions/uci-defaults.sh | 20
2 files changed,
Citeren Paul Fertser fercer...@gmail.com:
Hi John,
John Crispin blo...@openwrt.org writes:
looks good to me but i will run this past linux-mtd and ask them for an
opinion before merging it.
This patch was meant as a quick hack rather than a complete solution,
that's why I didn't bother
On 09/07/2015 09:42, Guenther Kelleter wrote:
Hi
-Original Message-
From: John Crispin [mailto:blo...@openwrt.org]
Sent: Thursday, July 09, 2015 8:24 AM
To: Guenther Kelleter; openwrt-devel@lists.openwrt.org
Subject: Re: [OpenWrt-Devel] [PATCH v3 1/7] ar71xx: ag71xx: add pdata
Arjen de Korte arjen+open...@de-korte.org writes:
Citeren Paul Fertser fercer...@gmail.com:
Another is
that such a patch is mostly a bad substitute for proper hardware design.
Not really. There may not be a hardware reset line if the flash is
running in x4 data mode.
Imagine there's a bug
Hi,
looking closer at the code i noticed that you need to do this as
ath79_mdio1_data is not initialized to 0 properly. the reason being that
it is not static and that in turn is because the header file declares it
as extern yet there are no users.
i would suggest you drop this patch and instead
I'm using OpenWRT Kernel 3.18, and I haven't found separate support for
6LoWPAN. In this kernel there is only 6LoWPAN over Bluetooth !
I want to use it with RF Module !
So how can I implement that please can you guide me please !
Firas Al Omary
RD (Software , Elctronics) Engineer
John Crispin blogic at openwrt.org writes:
sorry, been too busy and i doubt i will have time in the near future to
look at it :(
Oooh! Too bad :))
John, could you teld me some tips on how to progress with it and RT5350 cpu
instead MT7620? I've defined a new section in
Hi
-Original Message-
From: John Crispin [mailto:blo...@openwrt.org]
Sent: Thursday, July 09, 2015 8:32 AM
To: Guenther Kelleter; openwrt-devel@lists.openwrt.org
Subject: Re: [OpenWrt-Devel] [PATCH v3 2/7] ath79: dev-eth: initialize clock
for id 0 on AR934X
Hi,
looking closer
On 9 July 2015 at 08:31, John Crispin blo...@openwrt.org wrote:
On 08/07/2015 23:00, Roman Yeryomin wrote:
Signed-off-by: Roman Yeryomin ro...@advem.lv
---
target/linux/gemini/raidsonic/target.mk | 7 +++
1 file changed, 7 insertions(+)
diff --git
On 9 July 2015 at 08:26, John Crispin blo...@openwrt.org wrote:
On 08/07/2015 23:00, Roman Yeryomin wrote:
Signed-off-by: Roman Yeryomin ro...@advem.lv
---
target/linux/gemini/image/Makefile | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git
Hi,
I want to build radvd (2.0 version) on OpenWrt but it supports radvd 1.9
version.
I have two options:
1) either configure OpenWrt to download radvd's 2.0 version instead of 1.9
or
2) disable radvd in oldpackages and create a new package for 2.0 version
under /openwrt/package/ (like this
On Wed, Jul 8, 2015 at 2:00 PM, Paul Fertser fercer...@gmail.com wrote:
Hi,
ldy647 ldy...@163.com writes:
recently, when we install our wireless router, we found when we run
the reboot command, the board couldn't restart. We hope you could lend
us a hand to solve this problem. We'll be quite
Ahoy everyone,
more on the Telekom Speedstick LTE V (Huawei 3372s) from here:
http://www.amazon.de/dp/B00NLJE3O6
I've tested Enricos latest patch on MIPS (3.18.17) and x86_64 (3.18.11)
and had a little bit of trouble applying it to latest trunk, so here's
the latest tested patch from a diff
Hi
-Original Message-
From: John Crispin [mailto:blo...@openwrt.org]
Sent: Thursday, July 09, 2015 9:56 AM
To: Guenther Kelleter; openwrt-devel@lists.openwrt.org
Subject: Re: [OpenWrt-Devel] [PATCH v3 1/7] ar71xx: ag71xx: add pdata field
supported
On 09/07/2015 09:42,
-Original Message-
From: John Crispin [mailto:blo...@openwrt.org]
Sent: Thursday, July 09, 2015 8:42 AM
To: Guenther Kelleter; openwrt-devel@lists.openwrt.org
Subject: Re: [OpenWrt-Devel] [PATCH v3 7/7] ar71xx: add support for the devolo
dLAN pro 1200+ WiFi ac
Hi,
this
Hi
-Original Message-
From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] On Behalf
Of John Crispin
Sent: Thursday, July 09, 2015 8:38 AM
To: openwrt-devel@lists.openwrt.org
Subject: Re: [OpenWrt-Devel] [PATCH v3 5/7] mac80211: make ath10k firmware v2
selectable
The musl build fix introduced in r45108 removed all netinet/ether.h
includes, which made the prototypes of ether_aton and ether_ntoa
unavailable. As a result, the compiler assumed they return int instead
of a pointer. This currupted the pointer on 64bit targets, causing ebtables
to segfault in
I'm using RF module JN5148 from Jennic .. and modules from this company are
also not expensive !
Can you please provide me with the download page of the new version 4.0 of
OpenWrt !
I'm now checking on how to add Jennic drivers to OpenWRT if you know how to
please let me know !
Firas
Signed-off-by: Günther Kelleter guenther.kelle...@devolo.de
---
package/base-files/files/etc/init.d/led | 7 +++
.../base-files/files/lib/functions/uci-defaults.sh | 20
2 files changed, 27 insertions(+)
diff --git
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Boken Lin b...@onion.io wrote:
The firmware won't be dock-specific. The same firmware will be used
regardless of which dock the Omega is plugged into. And all docks have
similar configuration, i.e. every dock has a USB port.
And when I build a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Please consider renaming your board. If I understand your website
properly, the module is the Omega, and this boardfile is for the omega
_with_ one of it's docks
This Omega boardfile would not be usable for someone with a different
dock, with
When I tried to compile the kernel and configure it I found only 6LoWPAN
over Bluetooth support, and I need to add 6LoWPAN to work over RF module
like Jenic JN51xx.
I'm using OpenWRT Kernel 3.18!
So how can I implement that please can you guide me please !
43 matches
Mail list logo
