Re: [OpenWrt-Devel] [PATCH] oxnas: fix the incorrect board names

Somehow it seems like the wrong patch got committed instead of this one... On Sun, Nov 22, 2015 at 02:35:30PM +0100, Daniel Golle wrote: > On Sun, Nov 08, 2015 at 04:12:30AM +0800, Shonn Lu wrote: > > Signed-off-by: Shonn Lu > Acked-by: Daniel Golle

Re: [OpenWrt-Devel] [PATCH] oxnas: set irq of usb to cpu1

Hi! This was committed in r47618 though it is buggy (see below) and not clear whether manually setting irq-affinity is at all feasible. Please revert. Cheers Daniel On Mon, Nov 23, 2015 at 04:24:02PM +0100, Daniel Golle wrote: > On Mon, Nov 23, 2015 at 02:30:34PM +0800, Shonn Lu wrote: > >

Re: [OpenWrt-Devel] SVN to GIT transition / paid patch-checking

Hello, Sorry for my late input. I'd been considering starting a funded, but non-profit fork with close upstream collaboration just for the above reasons and for reasons even beyond that. I'm delighted that others came to a similar conclusion. Start seems probable (early?) next year. I welcome

[OpenWrt-Devel] fstools: factory reset on power failure during startup

Hi, I am using openwrt CC and an ubifs filesystem on top of ubi. If I plug off the power during startup, some times my configuration get lost and i am back to factory reset. In the package fstools there is the bin "mount_root" it is called twice during startup. 1. S10boot at line 10 2. S95done

Re: [OpenWrt-Devel] fstools: factory reset on power failure during startup

On 26/11/2015 09:24, Florian Eckert wrote: > Hi, > > I am using openwrt CC and an ubifs filesystem on top of ubi. > If I plug off the power during startup, some times my configuration > get lost and i am back to factory reset. > > In the package fstools there is the bin "mount_root" it is

Re: [OpenWrt-Devel] [PATCH firewall] zones : Redirect incoming WAN traffic only when the destination IP address matches the IP masquerading address

Friendly ping for feedback or alternative suggestions to fix the problem Thx, Hans > Hi, > > The problem occurs in the following scenario where two hosts A and B are in > use on the lan and connected to a router which is doing masquerade on the > wan link. > Host A has a private IP@ (eg

Re: [OpenWrt-Devel] [PATCH firewall] zones : Redirect incoming WAN traffic only when the destination IP address matches the IP masquerading address

Hi, did you consider to simply add "src_dport" to the redirect rule? ~ Jow ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Re: [OpenWrt-Devel] [PATCH firewall] zones : Redirect incoming WAN traffic only when the destination IP address matches the IP masquerading address

> did you consider to simply add "src_dport" to the redirect rule? Or rather, "src_dip" in this case as it is about redirecting the proper wan ip. ~ Jow ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org

Re: [OpenWrt-Devel] fstools: factory reset on power failure during startup

On 2015-11-26 09:24, Florian Eckert wrote: > Hi, > > I am using openwrt CC and an ubifs filesystem on top of ubi. > If I plug off the power during startup, some times my configuration > get lost and i am back to factory reset. > > In the package fstools there is the bin "mount_root" it is called

Re: [OpenWrt-Devel] ath9k-htc init

Hi Jonas, On Mon, 2015-11-23 at 16:48 +0100, Jonas Gorski wrote: > On Mon, Nov 23, 2015 at 9:21 AM, Alexey Brodkin > wrote: > > Hi Felix, Jonas, > > > > While playing with my AXS101 board and USB WI-Fi dongles I bumped in > > a couple of issues. Fortunately I found

Re: [OpenWrt-Devel] ath9k-htc init

On Thu, Nov 26, 2015 at 2:07 PM, Alexey Brodkin wrote: > Hi Jonas, > > On Mon, 2015-11-23 at 16:48 +0100, Jonas Gorski wrote: >> On Mon, Nov 23, 2015 at 9:21 AM, Alexey Brodkin >> wrote: >> > Hi Felix, Jonas, >> > >> > While playing with

Re: [OpenWrt-Devel] [PATCH firewall] zones : Redirect incoming WAN traffic only when the destination IP address matches the IP masquerading address

Thx for the feedback; will check if it fixes the issue Hans On Thu, Nov 26, 2015 at 1:56 PM, Jo-Philipp Wich wrote: > > did you consider to simply add "src_dport" to the redirect rule? > Or rather, "src_dip" in this case as it is about redirecting the proper > wan ip. > > ~

Re: [OpenWrt-Devel] [PATCH] rtl8xxxu: Add new driver for Realtek WiFi USB devices

> This new driver supports RTL8723AU, RTL8188CU, RTL8188RU, RTL8191CU, and > RTL8192CU and is taken from: > https://git.kernel.org/cgit/linux/kernel/git/jes/linux.git/log/?h=rtl8723au-mac80211 Has there been any progress getting this merged? -- Mike :wq

Re: [OpenWrt-Devel] [PATCH] rtl8xxxu: Add new driver for Realtek WiFi USB devices

On 11/26/2015 04:04 PM, W. Michael Petullo wrote: >> This new driver supports RTL8723AU, RTL8188CU, RTL8188RU, RTL8191CU, and >> RTL8192CU and is taken from: >> https://git.kernel.org/cgit/linux/kernel/git/jes/linux.git/log/?h=rtl8723au-mac80211 > > Has there been any progress getting this

Re: [OpenWrt-Devel] watchping

Hi All, Just FYI, finally I have been able to "liberate" my attempt at it into GPL code and the 'pingcheck' recently got merged into OpenWRT packages: https://github.com/br101/pingcheck Greetings, bruno On 07/06/2015 07:54 PM, Bruno Randolf wrote: > Hi Juliusz and all, > > Exporting a route

[OpenWrt-Devel] [PATCH] Add support for Huawei WS880

--- target/linux/bcm53xx/image/Makefile| 14 +++ .../910-ARM-BCM5301X-Add-DT-for-Huawei-WS880.patch | 115 + .../910-ARM-BCM5301X-Add-DT-for-Huawei-WS880.patch | 115 + 3 files changed, 244 insertions(+) create mode 100644

[OpenWrt-Devel] [PATCH 2/2] CC: ar71xx: backport support for TP-LINK TL-WR841N/ND v10

The TL-WR841N/ND v10 is mostly identical to the v9. Apart from some minor changes, it contains a newer revision of the QCA9533 SoC and the CPU clock is significantly higher. Backport of r47263 Signed-off-by: Matteo Valentini --- target/linux/ar71xx/image/Makefile | 9

[OpenWrt-Devel] [PATCH 1/2] CC: ar71xx: fix ath79_soc_rev value for QCA9531 ver. 2

ath9k expects to get revision id 2 for the QCA9531 ver. 2 rev. 0. This fixes the very low TX power on some devices like the TP-LINK TL-WR841ND v10 As ath79_soc_rev is only used to get the revision number to ath9k on the QCA9533, just set it to the expected value on the ver. 2. Backport of r47262

[OpenWrt-Devel] [PATCH v2] bcm53xx: add support for Huawei WS880

Signed-off-by: Prototik --- target/linux/bcm53xx/image/Makefile| 14 +++ .../910-ARM-BCM5301X-Add-DT-for-Huawei-WS880.patch | 115 + .../910-ARM-BCM5301X-Add-DT-for-Huawei-WS880.patch | 115 + 3 files changed, 244