Hello,
yesterday I had the problem that a openwrt box (x86) has many processes with
status D and reboot (even reboot -f) does not work. By default sysrq is not
enabled in kernel and cant be made as module.
After some research someone in #openwrt got the idea to create a kernel panic
(which
Hello,
On 12/22/11 10:33, Christoph Thielecke wrote:
Hello,
here are the packages for updated e1000 and e1000e drivers from sourceforge.
Please notice that you can only use one of the drivers kmod-e1000 or e1000
(kmod-e1000e or e1000e).
Any particular reasons not to use the mainline e1000
Hello,
here are the packages for updated e1000 and e1000e drivers from
sourceforge.
Please notice that you can only use one of the drivers kmod-e1000 or
e1000 (kmod-e1000e or e1000e).
Any particular reasons not to use the mainline e1000 and e1000e drivers?
Yes, the mainline driver is
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi!
I'm trying to run an HT40-enabled AP using the rt2880 mac80211 driver on OpenWrt
running on an Rt3050 SoC.
Somehow, the performance doesn't differ no matter if HT40 is enabled or not.
Though the nominal bitrate shown in iwconfig is 72.2MBit/s for
Attached is a patch for trunk which fixes gpio assignments for EnGenius
devies on the ar231x platform. This patch fixes rebooting as well the
reset button for the following devices:
ECB-3500, EAP-3660, EOA-3630, EOC-2611P, EOC-1650, EOC-5611P
Signed-off-by: Jonathan Bither
Hi,
Thanks for your feedback.
I will modify the patch. Also I am trying to use
driver/mtd/nand/nand_base.c as much as possible. I will submit modify
patch quickly.
Regards,
Tathagata
On 12/23/2011 03:28 AM, Hauke Mehrtens wrote:
On 12/14/2011 05:51 AM, Tathagata Das wrote:
Hi,
Attached
This sounds like noise spurs all over the place.
AGC calibration failing can be because of this.
Can you do a channel survey, or something? Felix, what can he do to
inspect the channel busy % ?
Adrian
___
openwrt-devel mailing list
On 2011-12-23 7:45 AM, Adrian Chadd wrote:
This sounds like noise spurs all over the place.
AGC calibration failing can be because of this.
Can you do a channel survey, or something? Felix, what can he do to
inspect the channel busy % ?
iw wlan0 survey dump
I tested USB with latest trunk (revision number 29600) and it did not
work. When I attached my USB drive to the board I received below error
messages.
[ 410.408000] usb 1-1: new high speed USB device number 2 using
ehci-platform
[ 410.584000] usb 1-1: unable to read config index 0