Re: [OpenWrt-Devel] [PATCH v2] hostapd: enable DFS support

On 2/17/14, 09:05 PM, Matti Laakso wrote: / The latest hostapd and some of the wireless drivers support DFS, which // is required on the 5 GHz band in many countries. This patch adds the // correct option to the hostapd configuration if dfs=1 is set (along with // the country code) in the

Re: [OpenWrt-Devel] [OpenWrt] #11862: ath: Failed to stop TX DMA, queues=0x004

ath: phy0: Failed to stop TX DMA, queues=0x004! ath: phy0: unsupported hw bitrate detected 0x15 using 1 Mbit (- happens with AR9132) My experience with: AA r39154 hostapd r39155 mac80211 r39150 And it seems to happen mostly with Atheros AR9130 rev 2 while with Atheros AR9132 rev 2 and AR7240

[OpenWrt-Devel] 答复: how do I troubleshoot Kernel Panic

this very useful for troubleshooting , thanks very much! -邮件原件- 发件人: openwrt-devel-boun...@lists.openwrt.org [mailto:openwrt-devel-boun...@lists.openwrt.org] 代表 Bastian Bittorf 发送时间: 2014年2月22日 4:23 收件人: OpenWrt Development List 主题: Re: [OpenWrt-Devel] how do I troubleshoot Kernel Panic

[OpenWrt-Devel] Buildroot failing

Hi! Trying to compile buildroot to be able to fix the problem with failsafe mode not responding on my TL-WR1043ND v2 here (Think the problem is that this device needs to use eth1, not eth0, as the failsafe port..) Anyway I ran into problems here and the most difficult one is the following:

[OpenWrt-Devel] [PATCH] [packages] add new package: openobex

A workaround is necessary to enable C# (CXX) language (CMakeLists.txt is DOS format and patching fails) in CMake because a test fails Error was: Unknown extension .cxx for file try_compile() works only for enabled languages. Currently these are: C DISCLAIMER: I cannot test this further

[OpenWrt-Devel] [PATCH v2] [packages] add new package: openobex

v2 : package/install slipped through the cracks, add it A workaround is necessary to enable C# (CXX) language (CMakeLists.txt is DOS format and patching fails) in CMake because a test fails Error was: Unknown extension .cxx for file try_compile() works only for enabled languages. Currently

Re: [OpenWrt-Devel] [PATCH v2] [packages] add new package: openobex

On Mon, Feb 24, 2014 at 7:02 PM, Dirk Neukirchen dirkneukirc...@web.de wrote: v2 : package/install slipped through the cracks, add it A workaround is necessary to enable C# (CXX) language (CMakeLists.txt is DOS format and patching fails) in CMake because a test fails Error was: Unknown

Re: [OpenWrt-Devel] Package maintainers

On 02/24/2014 06:41 PM, Jonas Gorski wrote: This package needs a maintainer before it can be considered for inclusion. Will you be the maintainer? If we're in maintainer update mode, I've been trying to be maintainer for a package for a little while now... The package somehow was

Re: [OpenWrt-Devel] [PATCH v2] hostapd: enable DFS support

On 2/24/14, 9:46 AM, Matti Laakso wrote: On 2/17/14, 09:05 PM, Matti Laakso wrote: / The latest hostapd and some of the wireless drivers support DFS, which // is required on the 5 GHz band in many countries. This patch adds the // correct option to the hostapd configuration if dfs=1 is set

[OpenWrt-Devel] [PATCH] Update zabbix to 2.2.2

refresh patch (patch configure.ac instead of .in) zabbix-agentd tested on wr1043nd zabbix-* compile tested zabbix-extra-wifi discovery still not working (need an suid helper to make ubus calls) don't forget this pending patch http://patchwork.openwrt.org/patch/4847/ Signed-off-by: Etienne

[OpenWrt-Devel] [PATCH][luci] Remove luci_fixtime, this as been replaced in openwrt by sysfixtime

Ping - Mail original - De: Etienne CHAMPETIER etienne.champet...@free.fr À: openwrt-devel@lists.openwrt.org Cc: Etienne CHAMPETIER etienne.champet...@free.fr Envoyé: Lundi 10 Février 2014 00:07:54 Objet: [PATCH] Remove luci_fixtime, this as been replaced in openwrt by sysfixtime

Re: [OpenWrt-Devel] [PATCH] [include] include: clear the line before outputting the progress message

*bump* -John On Wed, Jul 3, 2013 at 3:29 PM, John Szakmeister j...@szakmeister.net wrote: Signed-off-by: John Szakmeister j...@szakmeister.net --- include/scan.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) I noticed that the progress output was stepping all over itself, which

[OpenWrt-Devel] [PATCH] buildroot: add alternative PKG_CONFIG_PATH

udev Makefile.am has two different .pc files and put them into two locations. Don't know if changing the udev Makefile or changing the pkgconfig paths is the right way - someone has to decide :) udev and vala use an additional pkg-config dir add it to the path discovered because openobex did not

Re: [OpenWrt-Devel] [PATCH v2] [packages] add new package: openobex

On 24.02.2014 19:41, Jonas Gorski wrote: On Mon, Feb 24, 2014 at 7:02 PM, Dirk Neukirchen dirkneukirc...@web.de wrote: v2 : package/install slipped through the cracks, add it A workaround is necessary to enable C# (CXX) language (CMakeLists.txt is DOS format and patching fails) in CMake

[OpenWrt-Devel] Disable anonymous bug reports

Hi Can we disable anonymous bug report, it may prevent spam, and help keep contact with the bug reporter. Etienne ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Re: [OpenWrt-Devel] Really slow 3G speed through router... okay when connected directly

hi in this case , you can check dropped packet transmission by perform ifconfig on you ssh client , and on your pc side , you should looking for packet retransmitting by wiredshark. so that to locate who caused dropped packet on your network. If you are seeing a substantial

Re: [OpenWrt-Devel] [PATCH 5/5] base-files: hotplug-call: minor cleanup: make it more visible, that braces are used for sourcing (protection against misbehaving external script, e.g. exit-call)

* Felix Fietkau n...@openwrt.org [24.11.2013 09:08]: thanks for feedback - i understand your argument and agree. beside that: anything against patch 1-5? No objections from me, except that I think 1 and 2 should be merged into one patch. ping - should i resend the (simple) patch?