* John Clark [22.01.2016 07:55]:
> Is it intentional that wget is not available by default in the
> current trunk? I noticed this because /sbin/sysupgrade is failing in
> the current build of designated driver due to this. I thought I
> would point it out.
yes, is was dropped with r48386 + 4837
* Daniel Dickinson [22.01.2016 07:55]:
> For a netifd protocol is there way to tell netifd to *not*
> automatically try to restart the connection?
we have samething similar for PPPoE.
option 'authfail' '1' # since r33291
check package/network/services/ppp/files/ppp.sh
bye, bastian
_
* Daniel Dickinson [22.01.2016 07:55]:
> >>- export dev_${dir}="ifconfig $dev up txqueuelen 5 >&- 2>&-
> >>+ export dev_${dir}="ip link set $dev up txqueuelen 5 >&- 2>&-
> >This doesn't actually work...
>
> Is it unsupported by busybox ip applet? It is correct on fedora, but
From: Daniel Dickinson
Update to kernel 4.4 missed some symbols, fix that.
---
target/linux/generic/config-4.4| 2 ++
target/linux/x86/64/config-default | 10 ++
2 files changed, 12 insertions(+)
diff --git a/target/linux/generic/config-4.4 b/target/linux/generic/config-4.4
index 0
I apologize, my client mangled my previous attempt at resubmission.
Here is an updated version with three improvements. The problem with
the rules not being removed (which was not new and actually caused by a
grep command incompatible with musl) was fixed by using an updated grep
command (thanks
Is it intentional that wget is not available by default in the current
trunk? I noticed this because /sbin/sysupgrade is failing in the
current build of designated driver due to this. I thought I would point
it out.
chaos calmer
~~
CONFIG_BUSYBOX_DEFAULT_WGET=y
CONFIG_BUSYBOX_DEFAULT
Here is an updated version with three improvements. The problem with
the rules not being removed (which was not new and actually caused by a
grep command incompatible with musl) was fixed by using an updated grep
command (thanks nbd!). The problems pertaining to the xtables lock
(including "too m
Hi Felix (or anyone else who knows netifd)
For a netifd protocol is there way to tell netifd to *not*
automatically try to restart the connection?
I'm asking for the case of VPN where if the password it wrong (e.g. due
to an stoken that expires before the connection completes), too many
rep
Hi Felix,
On 21/01/16 05:28 PM, Felix Fietkau wrote:
done
append ${prefix}q "$(tcrules)" "$N"
- export dev_${dir}="ifconfig $dev up txqueuelen 5 >&- 2>&-
+ export dev_${dir}="ip link set $dev up txqueuelen 5 >&- 2>&-
This doesn't actua
With this patch sysupgrade will write directly to the partitions
instead of to the main disk. The UUID is copied from the image
to the MBR as well. This prevents the mbr from being completely
overwritten and losing the partition table. The -p option has
been added to maintain the original behavi
Thanks Felix. It would take me sometime to debug this.
Regards,
Em qui, 21 de jan de 2016 às 12:12, Felix Fietkau
escreveu:
> On 2016-01-21 14:42, Kevin Darbyshire-Bryant wrote:
> > Reverting 0ca8e85462074e713be6468a3ea7259caca1b1ea appears to allow perf
> > to compile again.
> >
> > "
> > elf
On 21/01/16 05:28 PM, Felix Fietkau wrote:
On 2016-01-20 20:22, open...@daniel.thecshore.com wrote:
From: Daniel Dickinson
This is the final package in base that depends on ifconfig, so
remove the the dependency on ifconfig and replace ifconfig
command with ip command. After packages there ar
On 2016-01-20 02:04, Michael Marley wrote:
> This adds IPv6 support to qos-scripts for both tc/qdisc and the
> iptables classification rules. The tc/qdisc part is accomplished
> by removing "protocol ip" from the tc command line, causing the
> rule to be applied to all protocols. The iptables par
On 2016-01-20 20:22, open...@daniel.thecshore.com wrote:
> From: Daniel Dickinson
>
> NB: Only compile tested.
>
> Stop depending on ifconfig/route and use busybox (or real)
> iproute2 utility instead. Depend on virtual ip package provided
> by previous commit so as not to force a particular ve
On 2016-01-20 20:22, open...@daniel.thecshore.com wrote:
> From: Daniel Dickinson
>
> This is the final package in base that depends on ifconfig, so
> remove the the dependency on ifconfig and replace ifconfig
> command with ip command. After packages there are various
> target preinit scripts t
This patch adds support for the Netgear EX2700 and builds an approriate
sysupgrade image.
What's missing is the option to build a factory image flashable via the
router's stock web interface, but this approach is hindered by the fact
that u-boot operforms an additional integrity check, which expec
On 2016-01-21 18:54, open...@daniel.thecshore.com wrote:
> From: Daniel Dickinson
>
> There are a number of packages in base and feeds
> that provide full versions of commands that are
> provided by busybox either by default or as a
> configure option. Here we add a macro that makes
> installati
On 2016-01-21 15:30, Wojciech Dubowik wrote:
> After the from binutils from 2.24-linaro to 2.25.1 I see following crash
> on mpc85xx platform.
>
> Error relocating /etc/preinit: unsupported relocation type 6
> Error relocating /etc/preinit: unsupported relocation type 4
> Error relocating /etc/pr
From: Daniel Dickinson
Rather than have packages that behave badly
when used alongside busybox and/or which fails to
cleanly uninstall, make any package for which there
is a busybox applet work cleanly with busybox (taking
over from busybox when installed, and restoring
busybox when removed as we
From: Daniel Dickinson
Rather than have packages that behave badly
when used alongside busybox and/or which fails to
cleanly uninstall, make any package for which there
is a busybox applet work cleanly with busybox (taking
over from busybox when installed, and restoring
busybox when removed as we
From: Daniel Dickinson
There are a number of packages in base and feeds
that provide full versions of commands that are
provided by busybox either by default or as a
configure option. Here we add a macro that makes
installation/uninstallation of the full version
work smoothly (so that --force-ov
From: Daniel Dickinson
Instead of installing to /usr/bin, which conflicts with busybox
if bzip2 applet present, install to /bin and symlink from
/usr/bin (replacing symlink to busybox on install), and,
if busybox applet present, restore busybox symlink on
uninstall.
Also manage busybox vs. full
There are a few packages in base and quite a number in packages feed that
replace busybox applets with full versions of the applicable command(s).
This patch series implements a common infrastructure for consistent
behavior.
Basically the full version is configure to install into a non-conflictin
From: Daniel Dickinson
Rather than have packages that behave badly
when used alongside busybox and/or which fails to
cleanly uninstall, make any package for which there
is a busybox applet work cleanly with busybox (taking
over from busybox when installed, and restoring
busybox when removed as we
Hi,
I added support for the TP-Link 802N
(http://www.tp-link.com/en/products/details/cat-9_TL-WR802N.html) to trunk.
Everything is based on the existing WR841N_V9 code (same chipset).
The resulting firmware can be flashed onto a factory device and runs without
any problems on my 2 test devices.
From: Kristian Evensen
After commit ebd3d8417c7a ("interface: fix moving interface address routes to
the table specified by ip[46]table"), it is no longer possible for clients on
LAN to reach machines on the WAN.
This patch restores support for clients on LAN reaching clients on WAN by using
rul
On Thursday 21 January 2016 15:47:02 Felix Fietkau wrote:
[...]
> > Hm, didn't work out so well. It basically explodes right away because
> > possible_net_t, possible_read_pnet, possible_write_pnet is not defined on
> > v3.18 when not using the mac80211 backporting headers. And when usign the
>
On 2016-01-21 15:26, Sven Eckelmann wrote:
> On Thursday 21 January 2016 15:03:10 Sven Eckelmann wrote:
>> On Thursday 21 January 2016 14:55:01 Felix Fietkau wrote:
>> > > @Felix, would it be ok for you when I propose a
>> > > "*-sync-cfg80211-station_info.patch" for the 3.18 generic kernel
> patc
After the from binutils from 2.24-linaro to 2.25.1 I see following crash
on mpc85xx platform.
Error relocating /etc/preinit: unsupported relocation type 6
Error relocating /etc/preinit: unsupported relocation type 4
Error relocating /etc/preinit: unsupported relocation type 6
Error relocating /e
On 2016-01-21 14:42, Kevin Darbyshire-Bryant wrote:
> Reverting 0ca8e85462074e713be6468a3ea7259caca1b1ea appears to allow perf
> to compile again.
>
> "
> elfutils: bump to 0.165
>
> Signed-off-by: Luiz Angelo Daros de Luca
> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48393
> 3c298f89-4303
On Thursday 21 January 2016 14:55:01 Felix Fietkau wrote:
> > @Felix, would it be ok for you when I propose a
> > "*-sync-cfg80211-station_info.patch" for the 3.18 generic kernel patches?
> > Or do you have a good idea how to force the openwrt-routing batman-adv
> > package
> > against the cfg8021
Thanks to this swconfig can access port PHYs and set link state using
its generic implementation.
Signed-off-by: Rafał Miłecki
---
.../generic/files/drivers/net/phy/b53/b53_common.c | 26 ++
.../generic/files/drivers/net/phy/b53/b53_mdio.c | 20 +
.../generi
It's quite common for switches to have PHY per port so we may use a
generic function for setting port link. We just need an API to access
PHYs which this patch also adds.
Signed-off-by: Rafał Miłecki
---
.../linux/generic/files/drivers/net/phy/swconfig.c | 44 --
target/linux
On 2016-01-21 14:47, Sven Eckelmann wrote:
> On Thursday 21 January 2016 12:56:01 Sven Eckelmann wrote:
>> Just installed in on some hardware (2x OM5P + OpenWrt 44654 + compat-wireless
>> 2015-10-26) and enabled BATMAN_V.
>>
>> [ 168.54] CPU 0 Unable to handle kernel paging request at virtual
On Thursday 21 January 2016 12:56:01 Sven Eckelmann wrote:
> Just installed in on some hardware (2x OM5P + OpenWrt 44654 + compat-wireless
> 2015-10-26) and enabled BATMAN_V.
>
> [ 168.54] CPU 0 Unable to handle kernel paging request at virtual
> address fff0, epc == 86d8301c, ra == 86d83
Reverting 0ca8e85462074e713be6468a3ea7259caca1b1ea appears to allow perf
to compile again.
"
elfutils: bump to 0.165
Signed-off-by: Luiz Angelo Daros de Luca
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@48393
3c298f89-4303-0410-b956-a3cf2f4a3e73"
On 20/01/16 17:27, Kevin Darbyshire-Bryant w
there are 4-5 patches all intermingled into 1 patch.
please split it up. one change per patch
John
On 21/01/2016 13:52, John Clark wrote:
>> +pinctrl-0;
>>> are you sure this bit is correct ?
>
> That is there to override the setting from the parent dtsi file. One
> could ar
> +pinctrl-0;
>> are you sure this bit is correct ?
That is there to override the setting from the parent dtsi file. One
could argue that the parent dtsi file should not be setting up the
function of the uart -- this should in fact be done at the dts file
level. We can see below i
* John Crispin [21.01.2016 13:30]:
> hang on there, this looks like bastel basti scriptowahn
8-) but the 'exit VS. return' is valid...
bye, bastian
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman
On 21/01/2016 12:53, Bastian Bittorf wrote:
> * Petr Štetiar [21.01.2016 12:22]:
>> boot() {
>> +[ -e "$RTC_DEV" ] && [ -e "$HWCLOCK" ] && $HWCLOCK -s -f $RTC_DEV &&
>> exit 0
>
> thank you! can you please do in this line a:
> && return
>
> and introduce a helper (maybe overengineered 8-
* Petr Štetiar [21.01.2016 12:22]:
> boot() {
> + [ -e "$RTC_DEV" ] && [ -e "$HWCLOCK" ] && $HWCLOCK -s -f $RTC_DEV &&
> exit 0
thank you! can you please do in this line a:
&& return
and introduce a helper (maybe overengineered 8-)
deps_ok() {
[ -e "$RTC_DEV" ] && [ -e "$HWCLOCK"
John, have you add time to try v4.3 kernel?
2015-12-30 19:13 GMT+01:00 John Crispin :
>
> On 30/12/2015 17:37, Baptiste Clenet wrote:
>> Hi,
>>
>> I'm using a custom board including a MT7688 chip, I made the image
>> with the latest openwrt build (I've just downloaded it), I got an
>> image of 2,9
This patch adds support for the Netgear EX2700 and builds an approriate
sysupgrade image.
What's missing is the option to build a factory image flashable via the
router's stock web interface, but this approach is hindered by the fact
that u-boot operforms an additional integrity check, which
When using ubus_auto_connect it is useful to be able to determine the
connection status of the ubus context. I'm testing the ctx.sock.registered flag
here, though I'm not sure if this is the best way to go about this check. I'm
happy for someone to tell me this is not the correct way to do this.
From: Daniel Dickinson
On systems that have an RTC prefer it to the file-based time fixup (i.e.
use hwclock when there is a permanent clock instead of the faked up time
logic that is needed when there is not RTC).
We can't rely on hctosys kernel feature either as we're usually using
RTC as kerne
Change wrong download.pl argument call order.
See download.pl argument list.
Signed-off-by: Florian Eckert
---
-v2 add patch description
include/download.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/download.mk b/include/download.mk
index ca5eee4..562a7b9 10064
On 20/01/2016 04:26, John Clark wrote:
> GPIO Changes
>
> The HLK-RM04 uses i2c and the top half of the uartf port for gpio. HiLink has
> labeled the RT5350 gpio1 pin as gpio0 on the device pinout, so it seems to
> make sense to export it as "hlk-rm04:gpio0" to avoid confusing it w
Hi,
few comments inline.
On 19/01/2016 22:42, Joseph C. Lehner wrote:
> This patch adds support for the Netgear EX2700 and builds an approriate
> sysupgrade image.
>
> What's missing is the option to build a factory image flashable via the
> router's stock web interface, but this approach is
48 matches
Mail list logo
