Hello,
I needed to update the kernel version to 3.10.44 to compile Barrier
Breaker for au1000 (MTX-1):
diff --git a/target/linux/au1000/Makefile b/target/linux/au1000/Makefile
index 2f9c24d..5fb4a43 100644
--- a/target/linux/au1000/Makefile
+++ b/target/linux/au1000/Makefile
@@ -13,7 +13,7 @@
Another problem I noted when upgrading from AA to BB on MTX-1:
# sysupgrade -n /tmp/openwrt-au1000-au1500-jffs2-128k-sysupgrade.bin
tar: openwrt-au1000-au1500-jffs2-128k.fs: not found in archive
Invalid image contents
Image check 'platform_check_image' failed.
I needed to change in
Hi John and all,
On 07/17/2014 08:14 AM, John Crispin wrote:
au1000 was not updated for BB and as you see there is some work missing.
feel free to send a patch to fix the sysupgrade issue. Once that is
done and if you volunteert to maintain au1000 for BB, then we culd add
it to the list of
Hi Garbor,
In luci-app-mindlna we find the following in
/etc/uci-defaults/luci-minidlna:
3 /etc/init.d/minidlna enabled {
4 /etc/init.d/minidlna stop
5 /etc/init.d/minidlna disable
6 }
Which disables MiniDLNA startup and is a quite unexpected side-effect of
On 07/18/2014 06:25 PM, John Crispin wrote:
4) we make a script that we call after the build on the server that
repackages the images
how about that ?
Hmmm, I think it should not be done on the server, but as part of the
OpenWRT build - also if I compile locally I would like to get a
On 07/21/2014 12:28 PM, Bruno Randolf wrote:
It would be possible to create a special image for upgrade from AA,
something like
openwrt-au1000-au1500-jffs2-128k-sysupgrade-from-12.09.bin, but I
think it's simpler to just add a symlink to the tar.gz in all cases,
The symlink approach does
au1000 users out there and
I guess we can expect them to follow the major OpenWRT releases...
bruno
John
On 21/07/2014 15:20, Bruno Randolf wrote:
On 07/21/2014 12:28 PM, Bruno Randolf wrote:
It would be possible to create a special image for upgrade from
AA, something like
openwrt
Hello again,
ffmpeg tries to automatically enable optimizations for the MIPS
platform, but for au1500 it automatically enables mips32r2, which this
CPU does not support.
For now, I could fix the problem by adding --disable-mips32r2 to
FFMPEG_CONFIGURE, but again, this is probably not the correct
On 10/13/2014 10:48 PM, Ted Hess wrote:
2 - Building alsa-lib has no dependency on the host system's audio
setup. The problem you are seeing is indeed a problem with your build
environment, and what tools you have installed. More information is
needed about our build system and target config
Signed-off-by: Bruno Randolf b...@einfach.org
---
.../au1000/base-files/lib/upgrade/platform.sh | 36
target/linux/au1000/image/Makefile |1 +
2 files changed, 37 insertions(+)
create mode 100644 target/linux/au1000/base-files/lib/upgrade
broken flag, it works.
Signed-off-by: Bruno Randolf b...@einfach.org
---
target/linux/au1000/Makefile |2 +-
.../linux/au1000/patches-3.3/004-pci-idsel-cb.diff | 12
2 files changed, 13 insertions(+), 1 deletion(-)
create mode 100644 target/linux/au1000
Signed-off-by: Bruno Randolf b...@einfach.org
---
target/linux/au1000/au1500/profiles/InternetBox.mk |5 ++---
target/linux/au1000/au1500/profiles/MeshCube.mk|4 +---
2 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/target/linux/au1000/au1500/profiles/InternetBox.mk
b
: Bruno Randolf b...@thinktube.com
Date: Thu Jul 26 20:21:22 2012 +0100
mac80211: generate MAC adresses in the upper byte
This way it's easier to avoid duplicate MAC adresses.
diff --git a/package/mac80211/files/lib/wifi/mac80211.sh
b/package/mac80211/files/lib/wifi/mac
index 1a4d7c1
On 10/30/2013 07:24 AM, Bastian Bittorf wrote:
[platform/au1000/sysupgrade] fix sysupgrade when changing rootfs from jffs2
to squashfs and visa versa
till now only jffs2 was possible and sysupgrade refuses to change fs-type,
because of bad/invalid content in sysupgrade-file. manually
Hi!
Auto-loading only the required modules definetly helps a lot for low CPU
power systems like the Soekris net48xx.
We have seen a difference in sirq (Soft IRQ) load of 80% with conntrack
modules versus 12% without any iptables modules when the system is hit
with 50Mbps UDP traffic on the
Hello,
I'm trying to add support for PPP unnumbered connections which are PPP
connections which don't use a dedicated IP, instead an IP address of
another local interface is reused on the PPP interface.
Some Internet providers require this, since their PPPoE server pushes
the network
Hi!
I'm reporting this here because your Trac believes this is Spam when I
try to create an issue.
http://wiki.openwrt.org/doc/uci/firewall#zones says:
network:
List of interfaces attached to this zone. If omitted and neither extra*
options, subnets or devices are given, the value of name
On 09/30/2013 12:43 PM, Jo-Philipp Wich wrote:
Hi.
I understand the backwards compatibility issue but the problem with the
fallback to name approach is that there is no clean way to have a zone
called name that is *not* covering a network called wan automatically.
I'd rather change the
On 10/04/2013 12:38 PM, Paul Barker wrote:
know much about. I'd really like to hear from whoever is maintaining
the build recipe and patches for opkg within OpenWRT to ensure that we
help each other out rather than stepping on each others toes.
BTW: One thing I'd like the OpenWRT maintainers
Hi, This is a patch against AA which fixes it for us:
wpa_supplicant: fix beacon_int configuration option
wpa_supplicant expects beacon_int instead of beacon_interval in its
config file.
diff --git a/package/hostapd/files/wpa_supplicant.sh
b/package/hostapd/files/wpa_supplicant.sh
index
Add PATH in case it is missing (e.g. when executing the script from
ssh, like ssh IP /etc/init.d/cron restart).
Signed-off-by: Bruno Randolf b...@einfach.org
---
package/busybox/files/cron | 2 ++
1 file changed, 2 insertions(+)
diff --git a/package/busybox/files/cron b/package/busybox/files
Mark as essential to prevent removal from a running system.
Signed-off-by: Bruno Randolf b...@einfach.org
---
package/base-files/Makefile | 1 +
package/kernel/Makefile | 2 +-
package/opkg/Makefile | 1 +
3 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/package/base-files
the limit to 0xB0 (11 MiB).
Signed-off-by: Bruno Randolf b...@einfach.org
---
tools/firmware-utils/src/mkfwimage.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/firmware-utils/src/mkfwimage.c
b/tools/firmware-utils/src/mkfwimage.c
index a527014..e3a03c1 100644
), and the following script in /etc/ppp/ip-up.d/.
It works, but it is not integrated with netifd, e.g. netifd does not know about
the IP address we assigned.
Signed-off-by: Bruno Randolf b...@einfach.org
---
package/ppp/Makefile | 2 ++
package/ppp/files/ip_unnumbered.sh | 45
A similar change was recently merged in iw commit
58b46da26ab9b5ff31c7033e175351eb1301d9af
Signed-off-by: Bruno Randolf b...@einfach.org
---
package/iw/patches/140-freq-11j.patch | 85 +++
1 file changed, 85 insertions(+)
create mode 100644 package/iw/patches/140
TARGET_x86_generic_Soekris48xx is not defined,
CONFIG_TARGET_x86_generic_Soekris48xx is
This changes makes it possible to override the network config for soekris
net48xx
and net45xx targets.
Signed-off-by: Bruno Randolf b...@einfach.org
---
target/linux/x86/base-files.mk | 2 +-
1 file changed
[cfg8
0211]()
It is caused by an uninitialized variable center_freq1.
The same was recently merged in wireless-testing commit
f478f33a93f9353dcd1fe55445343d76b1c3f84a.
Signed-off-by: Bruno Randolf b...@einfach.org
---
package/mac80211/Makefile | 2 +-
.../patches/920
] ? handle_irq_event+0x19/0x30
[ 13.310053] [c10524f6] ? handle_level_irq+0x66/0x70
[ 13.310053] IRQ [c1003bca] ? do_IRQ+0x3a/0xb0
[ 13.310053] [c131d6e9] ? common_interrupt+0x29/0x30
[ 13.310053] ---[ end trace ac85af0b4252a378 ]---
Signed-off-by: Bruno Randolf b...@einfach.org
---
.../004
such
as JFFS2. As OpenWRT is used on a variety of systems, some with plenty of
writeable flash space, I suggest to not unconditionally disable upgrade all.
Signed-off-by: Bruno Randolf b...@einfach.org
---
package/opkg/patches/009-remove-upgrade-all.patch | 41 ---
1 file
wpa_supplicant expects beacon_int instead of beacon_interval in its config
file.
Signed-off-by: Bruno Randolf b...@einfach.org
---
package/hostapd/files/wpa_supplicant.sh | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/package/hostapd/files/wpa_supplicant.sh
b/package
attitude_adjustment/package/hostapd/files/wpa_supplicant.sh.rej
AA revision 38351
Hi,
Check the patch I just posted which is against current AA 12.09. If it
does not apply to your revision, the patch is simple enough so you can
make the same changes by hand.
bruno
On 10/10/2013 03:22 AM, Bruno Randolf
Signed-off-by: Bruno Randolf b...@einfach.org
---
libs/libgphoto2/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/libs/libgphoto2/Makefile b/libs/libgphoto2/Makefile
index cc45ece..e31b30a 100644
--- a/libs/libgphoto2/Makefile
+++ b/libs/libgphoto2/Makefile
@@ -37,7
Signed-off-by: Bruno Randolf b...@einfach.org
---
net/ddns-scripts/Makefile | 2 ++
net/ddns-scripts/files/etc/init.d/ddns | 12
2 files changed, 14 insertions(+)
create mode 100644 net/ddns-scripts/files/etc/init.d/ddns
diff --git a/net/ddns-scripts/Makefile b/net
Here some patches against AA 12.09 packages...
Bruno Randolf (7):
libgphoto2 depends on libusb, not libusb-1.0
LIBCONFIG: enabling c++ support (lconfig++).
ddns-scripts: add init script
pptpd: Add uci configuration for PPTPD.
pptpd: remove IP in options.pptp
isc-dhcp: dhcrelay: add
Signed-off-by: Bruno Randolf b...@einfach.org
---
libs/libconfig/Makefile | 6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/libs/libconfig/Makefile b/libs/libconfig/Makefile
index f56de43..5eb0ed8 100644
--- a/libs/libconfig/Makefile
+++ b/libs/libconfig/Makefile
@@ -42,20
Signed-off-by: Bruno Randolf b...@einfach.org
---
net/isc-dhcp/Makefile | 6 +++--
net/isc-dhcp/files/dhcrelay.config | 15 +++
net/isc-dhcp/files/dhcrelay.init | 51 ++
3 files changed, 70 insertions(+), 2 deletions(-)
create mode
RFC3527 link selection sub-option is used to select the uplink interface of
dhcrelay in cases where the DHCP server does not know how to reach the dhcrelay
based on the DHCP range. This can happen in weird network configurations like
Mesh networks.
Signed-off-by: Bruno Randolf b...@einfach.org
Signed-off-by: Bruno Randolf b...@einfach.org
---
net/pptpd/Makefile| 3 +++
net/pptpd/files/pptpd.init| 41 +++--
net/pptpd/files/pptpd.uciconf | 8
3 files changed, 50 insertions(+), 2 deletions(-)
create mode 100644 net/pptpd
ppp has obsoleted this option (as of v2.4.3-7) according to
http://wiki.openwrt.org/doc/howto/vpn.server.pptpd
Signed-off-by: Bruno Randolf b...@einfach.org
---
net/pptpd/files/options.pptpd | 1 -
1 file changed, 1 deletion(-)
diff --git a/net/pptpd/files/options.pptpd b/net/pptpd/files
Please forget this patch, it is slightly incompatible with the version
that already exists in trunk... I will update trunk instead.
bruno
On 10/10/2013 01:16 PM, Bruno Randolf wrote:
Signed-off-by: Bruno Randolf b...@einfach.org
---
net/isc-dhcp/Makefile | 6 +++--
net/isc
On 10/10/2013 02:50 PM, Jo-Philipp Wich wrote:
Are these patches backports from trunk? If not please rebase them on
current trunk so we can apply them there and backport to 12.09 afterwards.
I made the patches originally for 12.09. I am now forward-porting them
to trunk, but due to the folder
Here I'm resending the patches which still apply to trunk from my previous
series which was for AA.
Bruno Randolf (8):
mark base-files, kernel, opkg as essential packages
mkfwimage: Increase RSPRO maximum size to 0xF0 (15 MiB)
opkg: remove patch which disables upgrade all
iw: add
Mark as essential to prevent removal from a running system.
Signed-off-by: Bruno Randolf b...@einfach.org
---
package/base-files/Makefile | 1 +
package/kernel/linux/Makefile | 2 +-
package/system/opkg/Makefile | 1 +
3 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/package/base
such
as JFFS2. As OpenWRT is used on a variety of systems, some with plenty of
writeable flash space, I suggest to not unconditionally disable upgrade all.
Signed-off-by: Bruno Randolf b...@einfach.org
---
.../opkg/patches/009-remove-upgrade-all.patch | 41 --
1 file
wpa_supplicant expects beacon_int instead of beacon_interval in its config
file.
Signed-off-by: Bruno Randolf b...@einfach.org
---
package/network/services/hostapd/files/wpa_supplicant.sh | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/package/network/services/hostapd
the limit to 0xB0 (11 MiB).
Signed-off-by: Bruno Randolf b...@einfach.org
---
tools/firmware-utils/src/mkfwimage.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/firmware-utils/src/mkfwimage.c
b/tools/firmware-utils/src/mkfwimage.c
index a527014..e3a03c1 100644
A similar change was recently merged in iw commit
58b46da26ab9b5ff31c7033e175351eb1301d9af
Signed-off-by: Bruno Randolf b...@einfach.org
---
.../network/utils/iw/patches/140-freq-11j.patch| 85 ++
1 file changed, 85 insertions(+)
create mode 100644 package/network/utils
/.
RFC: It works, but it is not integrated with netifd, e.g. netifd does not know
about the IP address we assigned.
Signed-off-by: Bruno Randolf b...@einfach.org
---
package/network/services/ppp/Makefile | 2 +
.../network/services/ppp/files/ip_unnumbered.sh| 45
Signed-off-by: Bruno Randolf b...@einfach.org
---
package/libs/libconfig/Makefile | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/package/libs/libconfig/Makefile b/package/libs/libconfig/Makefile
index 5ade648..8723e36 100644
--- a/package/libs/libconfig/Makefile
+++ b
TARGET_x86_generic_Soekris48xx is not defined,
CONFIG_TARGET_x86_generic_Soekris48xx is
This changes makes it possible to override the network config for soekris
net48xx
and net45xx targets.
Signed-off-by: Bruno Randolf b...@einfach.org
---
target/linux/x86/base-files.mk | 2 +-
1 file changed
On 10/11/2013 01:24 AM, Yousong Zhou wrote:
To make `enabled 0` a working option, it should be something like
setup_config pptpd start_pptpd
Thanks, will fix and resend the patch for trunk.
bruno
___
openwrt-devel mailing list
Similar to my previous series for AA, now rebased to trunk...
Bruno Randolf (6):
libgphoto2 depends on libusb-compat, not libusb-1.0
ddns-scripts: add init script
pptpd: Add uci configuration for PPTPD.
pptpd: remove IP in options.pptp
isc-dhcp: dhcrelay: Add more UCI options
isc-dhcp
Signed-off-by: Bruno Randolf b...@einfach.org
---
net/ddns-scripts/Makefile | 2 ++
net/ddns-scripts/files/etc/init.d/ddns | 12
2 files changed, 14 insertions(+)
create mode 100644 net/ddns-scripts/files/etc/init.d/ddns
diff --git a/net/ddns-scripts/Makefile b/net
Signed-off-by: Bruno Randolf b...@einfach.org
---
net/pptpd/Makefile| 3 +++
net/pptpd/files/pptpd.init| 40 ++--
net/pptpd/files/pptpd.uciconf | 8
3 files changed, 49 insertions(+), 2 deletions(-)
create mode 100644 net/pptpd/files
ppp has obsoleted this option (as of v2.4.3-7) according to
http://wiki.openwrt.org/doc/howto/vpn.server.pptpd
Signed-off-by: Bruno Randolf b...@einfach.org
---
net/pptpd/files/options.pptpd | 1 -
1 file changed, 1 deletion(-)
diff --git a/net/pptpd/files/options.pptpd b/net/pptpd/files
Signed-off-by: Bruno Randolf b...@einfach.org
---
libs/libgphoto2/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/libs/libgphoto2/Makefile b/libs/libgphoto2/Makefile
index cc45ece..bf4f55f 100644
--- a/libs/libgphoto2/Makefile
+++ b/libs/libgphoto2/Makefile
@@ -37,7
Add more options to dhcrelay UCI and init script:
- enabled
- interfaces: Listen interfaces
- relay_mode: What to do about packets that already have a relay option
Also mark /etc/config/dhcrelay as conffile
Signed-off-by: Bruno Randolf b...@einfach.org
---
net/isc-dhcp/Makefile
RFC3527 link selection sub-option is used to select the uplink interface of
dhcrelay in cases where the DHCP server does not know how to reach the dhcrelay
based on the DHCP range. This can happen in weird network configurations like
Mesh networks.
Signed-off-by: Bruno Randolf b...@einfach.org
On 10/11/2013 01:35 AM, Yousong Zhou wrote:
Hi,
On 10 October 2013 19:02, Bruno Randolf b...@einfach.org wrote:
Add PATH in case it is missing (e.g. when executing the script from
ssh, like ssh IP /etc/init.d/cron restart).
Signed-off-by: Bruno Randolf b...@einfach.org
---
package/busybox
On 10/15/2013 02:45 PM, Jo-Philipp Wich wrote:
comments inline.
Hi, Thanks, will address the issues and resend.
bruno
On 11.10.2013 12:30, Bruno Randolf wrote:
Signed-off-by: Bruno Randolf b...@einfach.org
---
net/pptpd/Makefile| 3 +++
net/pptpd/files/pptpd.init| 40
On 10/15/2013 02:52 PM, Jo-Philipp Wich wrote:
+++ b/net/isc-dhcp/patches/100-relay-rfc3527-link-selection.patch
Can you elaborate on the origin of this patch? Was it written by you?
Yes, this patch was written by me, and I have sent it for inclusion to
the upstream ISC dhcp-hackers
Hi!
Here I resend the PPTPD and dhcrelay patches for trunk packages. I tried to
address all issues jow has mentioned before.
Bruno Randolf (3):
pptpd: Add uci configuration for PPTPD.
isc-dhcp: dhcrelay: Add more UCI options
isc-dhcp: dhcrelay: Add RFC3527 link selection sub-option
net
Add more options to dhcrelay UCI and init script:
- enabled
- interfaces: Listen interfaces
- relay_mode: What to do about packets that already have a relay option
Also mark /etc/config/dhcrelay as conffile
Signed-off-by: Bruno Randolf b...@einfach.org
---
net/isc-dhcp/Makefile
Signed-off-by: Bruno Randolf b...@einfach.org
---
net/pptpd/Makefile | 5 -
net/pptpd/files/pptpd.config | 8
net/pptpd/files/pptpd.init | 46 +++-
3 files changed, 53 insertions(+), 6 deletions(-)
create mode 100644 net/pptpd
RFC3527 link selection sub-option is used to select the uplink interface of
dhcrelay in cases where the DHCP server does not know how to reach the dhcrelay
based on the DHCP range. This can happen in weird network configurations like
Mesh networks.
Signed-off-by: Bruno Randolf b...@einfach.org
hi florian!
i've been playing with openwrt on my meshcube this weekend. so i send a few
small patches for the au1000. i'm not sure how they fit into the openwrt way
of doing things, but i'd like to include a few more programs and kernel
modules on the MeshCube by default, since we have the
64k blocksize gives erase errors
Signed-off-by: Bruno Randolf [EMAIL PROTECTED]
---
target/linux/au1000/image/Makefile |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/target/linux/au1000/image/Makefile
b/target/linux/au1000/image/Makefile
index 3cdd83e..062d613 100644
use .srec file suffix for .srec files, please
Signed-off-by: Bruno Randolf [EMAIL PROTECTED]
---
target/linux/au1000/image/Makefile |4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/target/linux/au1000/image/Makefile
b/target/linux/au1000/image/Makefile
index 062d613
this adds two au1000 based profiles: MeshCube and T-Mobile Internet Box.
Signed-off-by: Bruno Randolf [EMAIL PROTECTED]
---
target/linux/au1000/profiles/InternetBox.mk | 19 +++
target/linux/au1000/profiles/MeshCube.mk| 20
2 files changed, 39
this patch fixes the iperf configure and dependencies:
Index: package/iperf/Makefile
===
--- package/iperf/Makefile (revision 615)
+++ package/iperf/Makefile (working copy)
@@ -22,7 +22,7 @@
SUBMENU:=Monitoring
Felix Fietkau wrote:
Bruno Randolf wrote:
hmm, i would not have bothered to send a patch if it worked fine without.
i'm compiling for x86 and there is no g++-uc in my toolchain path...
also there is no uclibcxx
am i missing something?
uclibc++ is part of the packages feed. you can do
+PKG_SOURCE_VERSION:=HEAD
+PKG_BUILD_DIR:=$(BUILD_DIR)/opencv
+
+PKG_FIXUP = libtool
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/opencv
+ SECTION:=multimedia
+ CATEGORY:=Multimedia
+ DEPENDS:=+libjpeg +libpng +libffmpeg
+ MAINTAINER:=Bruno Randolf [EMAIL PROTECTED]
+ TITLE:=OpenCV
this patch fixes CVS download - otherwise i get the error:
cvs checkout: No CVSROOT specified! Please use the `-d' option
Index: include/download.mk
===
--- include/download.mk (revision 629)
+++ include/download.mk (revision 630)
-08-27 at 10:52 -0400, Bruno Randolf wrote:
this adds the opencv (open source computer vision) libraries
Index: package/opencv/Makefile
===
--- package/opencv/Makefile (revision 0)
+++ package/opencv/Makefile (revision 0
-08-27 at 10:52 -0400, Bruno Randolf wrote:
this adds the opencv (open source computer vision) libraries
Index: package/opencv/Makefile
===
--- package/opencv/Makefile (revision 0)
+++ package/opencv/Makefile (revision 0
when setting the output state of one GPIO pin we have to keep the state of the
other pins, hence use binary OR. also gpio_direction_output() wants to set an
initial value, so add that too.
this fixes a problem with the USB power switch on mtx-1 boards.
Signed-off-by: Bruno Randolf [EMAIL
hello!
trying to use todays openwrt trunk on a soekris net4826 i ran into the
following problems:
1) the default kernel 2.6.31.12 does not boot (system continually reboots) and
does not show any output on the serial console. i updated to kernel 2.6.32.8,
which works better, but:
2)
On Saturday 13 February 2010 20:22:15 Florian Fainelli wrote:
Hello,
Le samedi 13 février 2010 06:16:17, Bruno Randolf a écrit :
hello!
trying to use todays openwrt trunk on a soekris net4826 i ran into the
following problems:
1) the default kernel 2.6.31.12 does not boot (system
On Saturday 13 February 2010 19:57:08 ulf kypke wrote:
hello bruno,
welcome back ;-)
2010/2/13 Bruno Randolf b...@thinktube.com:
hello!
trying to use todays openwrt trunk on a soekris net4826 i ran into the
following problems:
1) the default kernel 2.6.31.12 does not boot (system
On Wednesday 17 February 2010 10:11:36 Jo-Philipp Wich wrote:
Hi.
I committed a modified version based on your patch in
https://dev.openwrt.org/changeset/19681 - please test and report if you
see further issues.
hi!
yes, grub configuration now works out of the box.
there are still the
hi felix!
let ath5k use PACKAGE_ATH_DEBUG config too, to enable debugging of ath5k...
ah - and there is a problem with firmware extraction for RT, even though no RT
drivers are
selected (extraction fails, build fails). so i commented that out. feel free to
ignore (or
fix ;)) that last part.
hi felix!
using the openwrt mac80211 201-ath5k-WAR-for-AR71xx-PCI-bug.patch on an
routerstation pro really kills ath5k performance. with it applied i can get
only around 15Mbps, without it i can get up to 30Mbps (that is UDP iperf). and
i haven't seen any problems in my, admittedly very
From: Bruno Randolf b...@tt-desk.(none)
resent and rebased against current trunk
---
package/mac80211/Makefile |3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile
index b302419..64cbf28 100644
--- a/package/mac80211
hi!
currently PCI is broken on the au1000 platforms.
this is also the reason for:
https://dev.openwrt.org/ticket/6851
in order to debug this further, does anyone know when the au1000 was working
last? which kernel version? has anyone tried openwrt on au1000 recently?
bruno
On Tuesday 06 April 2010 17:42:12 Florian Fainelli wrote:
Hi Bruno,
On Monday 05 April 2010 03:23:49 Bruno Randolf wrote:
hi!
currently PCI is broken on the au1000 platforms.
this is also the reason for:
https://dev.openwrt.org/ticket/6851
in order to debug this further
On Friday 21 May 2010 18:49:01 ulf kypke wrote:
hi,
backfire is broken on meshcube and magicbox
it would be very nice, special for people who are not that familiar
with unbricking devices, to stop providing this images on your
http://downloads.openwrt.org/backfire/10.03/ page.
even nicer
On Friday 21 May 2010 19:25:39 ulf kypke wrote:
well specially on meshcubes this is very annoying. now i have to build
a new special serial converter for it and my to roof date this
afternoon is canceled, happy hacking
hi ulf!
afaik ethernet should still work, it's just PCI which is broken...
On Friday 21 May 2010 19:58:45 you wrote:
On Friday 21 May 2010 12:25:39 ulf kypke wrote:
well specially on meshcubes this is very annoying. now i have to build
a new special serial converter for it and my to roof date this
afternoon is canceled, happy hacking
Just use 2.6.30 if you want
hi!
on the routerstation-pro the mtd command of the sysupgrade script
(ar71xx/base-files/lib/upgrade/platform.sh) sometimes fails because of
problems with the FIS table. this sometimes results in a segfault, sometimes
in an error message. i see this about every third time i try to flash an
On Wednesday 02 June 2010 21:05:46 Jo-Philipp Wich wrote:
Hi.
I think this is a general mmap() issue in ar71xx, the nvram utility had
similar problems - the mmap call will always succeed but sometimes the
mapped memory just contains zeroes.
You can try the patch below and check whether it
hi!
it seems the problem was alchemy_gpio2_enable(); everything works fine when i
remove that call. maybe the problem is that PCI_SERR and PCI_RST# are
connected to the GPIO2 block and they don't like the reset of GPIO2?
in the following patch i also remove the now unnecessary au_sync from
/patches/501-ibss-bintval.patch b/package/iw/patches/501-ibss-bintval.patch
new file mode 100644
index 000..aa18641
--- /dev/null
+++ b/package/iw/patches/501-ibss-bintval.patch
@@ -0,0 +1,57 @@
+iw: Add ibss join parameter for beacon interval
+
+From: Bruno Randolf b...@einfach.org
Hi!
I just noted that there is an issue with the firmware upgrade via LuCI
on the OM2P. The image validity check fails, because the following
script in system.lua fails:
local function image_supported()
-- XXX: yay...
return ( 0 == os.execute(
Hi John,
Thanks!
I just tested it: up running, PCI got detected, Wifi works, looking
good... :)
root@OpenWrt:/# uname -a
Linux OpenWrt 3.14.25 #1 Mon Dec 1 20:42:17 WET 2014 mips GNU/Linux
bruno
On 12/01/2014 04:55 PM, John Crispin wrote:
Hi,
i pushed 3.14 support for au1000. i have no
Hi Bastian,
Sorry for the delay.
On 12/08/2014 08:01 PM, Bastian Bittorf wrote:
what is strange: the ethernet-mac is always changing
after each reboot. not sure if this was also the case
with 3.10 - bruno can you see this too?
Yes, I can confirm this.
I just checked: The same happens on
On 12/10/2014 11:30 AM, Bastian Bittorf wrote:
so, does this mean we have not applied DTS to this target?
Very likely.
I don't remember how we got the MAC addr set before DT.
what is also strange: 'yamonenv' is installed, but simply
does not work. i never used it before, so i'am not sure
if
Hi Bastian,
There is a syntax error in the /etc/uci-defaults/02_network script, but
even when I fix that, the MAC address is not set. What is
ucidef_set_interface_macaddr supposed to do?
Some more comments below:
On 12/10/2014 09:26 PM, Bastian Bittorf wrote:
The target au1000 has at least 2
Hello!
Does anyone know a hardware platform with 2 or more wifi interfaces
which can both be used in the 2.4 GHz band?
I just went thru the table of hardware looking for boards which have
more than one wifi. Unfortunately all of the consumer APs tagged with
2WNIC seem to have 1 wifi for 2.4GHz
On 01/10/2015 08:38 PM, David Lang wrote:
I would not expect to find consumer hardware that had two radios on the
2.4GHz band, the problems that you would run into trying to keep the
output of one radio from deafening the other (if not outright popping
the receiver amps) would be significant
On 01/11/2015 09:25 PM, Gioacchino Mazzurco wrote:
The device has two radios:
- 802.11abgn AR9344 SoC, ath9k, working OK
- 802.11ac QCA988x, ath10k, working in AP and STA modes
Interesting device. Can you post more specs, or add to the TOH wiki?
Thanks,
bruno
1 - 100 of 164 matches
Mail list logo
