The last patch I saw was from gui in Jan 2017 but I haven't seen this patch
added to the latest openwrt code
https://lists.openwrt.org/pipermail/openwrt-devel/2017-January/005212.html
It appeared that there were issues with the Ethernet ports - was that the
only problem left for full support?
The last patch I saw was from gui in Jan 2017 but I haven't seen this
patch added to the latest openwrt code
https://lists.openwrt.org/pipermail/openwrt-devel/2017-January/005212.html
It appeared that there were issues with the Ethernet ports and the
Nand flash - any progress on those issues -
It seems its quite hard to find a board that is fully supported by
openwrt that has 2x mini pci-express, 2x ethernet ports (WAN, LAN), >
64M flash
I want to plug in ath10k supported 802.11ac mini pci-e radios
Any thoughts suggestions
Thanks
David
___
Thanks all for the quick response
Turns out I can do with one PCIe if the board has built in WiFi and I
need power and form factor to be pretty low. So I'm going with
COMPEX WP J563
http://shop.compex.com.sg/wpj563.html
Looks pretty good for $70 and openwrt supported hardware table shows
that
approx. 650 Mbps) ... so
the Espressobin is quite close
Cheers
David
On Sat, Oct 6, 2018 at 12:30 AM David Johnson
wrote:
>
> It looks like Ben was right
>
> Further investigation is showing that my Compex WPJ563 (Qualcomm
> Atheros QCA9563 74Kc MIPS processor, Dragonfly Series 64K
David Johnson
wrote:
>
> I'm trying to see what max speed can be achieved
>
> My setup is as follow:
> Board: Compex WPJ 563
> Card Compex wle900vx
> OS: Libremesh running openwrt 18.06
> Driver: ath10k_pci :00:00.0: firmware ver 10.2.4-1.0-00033 api 5
> features no-p
that you do not have
> to force MCS to get highest encoding rate.
>
> Thanks,
> Ben
>
> On 10/05/2018 04:17 AM, David Johnson wrote:
> > I'm trying to see what max speed can be achieved
> >
> > My setup is as follow:
> > Board: Compex WPJ 563
> > Card C
36% sys 0% nic 0% idle 0% io 0% irq 43% sirq
Load average: 4.59 3.06 1.90 3/74 25823
PID PPID USER STAT VSZ %VSZ %CPU COMMAND
3 2 root RW 0 0% 32% [ksoftirqd/0]
24511 4419 root S33320 27% 22% iperf -c 10.69.0.1 -P 10 -i 5 -t 120
Any suggestions
Regards
