[OpenWrt-Devel] [PATCH] Support for jffs2 image in NAND flash
Hi, This patch adds support for building a jffs2 image to go in a NAND flash device with no cleanmarkers. Thanks, Matt 100-jffs2-rootfs-nand.patch Description: 100-jffs2-rootfs-nand.patch ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] Buffalo wzr-hp-g300nh2
That's great Peter, any ideas when you would be able to get the patches into trunk? Thanks, Matt -Original Message- From: openwrt-devel-boun...@lists.openwrt.org [mailto:openwrt-devel-boun...@lists.openwrt.org] On Behalf Of Peter Naulls Sent: 17 November 2011 00:24 To: OpenWrt Development List Subject: Re: [OpenWrt-Devel] Buffalo wzr-hp-g300nh2 On 11/10/2011 08:21 AM, Peter Naulls wrote: I'll test any such patches of course. As an additional note, we're going to need the same thing on a300gh, since I'm getting one of those in next few days. I'll submit any work on that here, even if it's Now done. It's a mess right now, so not suitable for posting, but in short, the wzr-hp-g300nh, wzr-hp-g300nh2 and wzr-hp-ag300h all use different SoC models, so choosing the right init code based on that is easy. The setup for the g300ng2 and ag300h is 80% similar, so that code could be combined more than I've done. ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] Build just the kernel
Hi, I am trying to hack some drivers in the kernel for a mips machine, but so far the only way I have found to get the openWRT build system to recompile the kernel is to run make in the root directory of openWRT. Running make linux-compile or make linux-install as I've seen previously on the mailing list give no known target errors. Please could someone tell me the make target to get the build system to just recompile the kernel, then build the sysupgrade image? Thanks, Matt ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] Buffalo wzr-hp-g300nh2
Hi all, I have one of these routers, but there is no support in openWRT trunk or seemingly in DD-WRT, even though it ships with that installed. The wiki (http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300nh2) suggests that support is work in progress - please could you tell me if it is being worked on and when support may get into the trunk? Thanks, Matt ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] Buffalo wzr-hp-g300nh2
Great - this is good news :-) I will of course test these patches, and if there is anything I can do to help get them into the trunk then I will do so. Thanks, Matt -Original Message- From: openwrt-devel-boun...@lists.openwrt.org [mailto:openwrt-devel-boun...@lists.openwrt.org] On Behalf Of Peter Naulls Sent: 10 November 2011 16:21 To: openwrt-devel@lists.openwrt.org Subject: Re: [OpenWrt-Devel] Buffalo wzr-hp-g300nh2 On 11/10/2011 08:13 AM, Mark Deneen wrote: On Thu, Nov 10, 2011 at 9:42 AM, Peter Naullspe...@chocky.org wrote: On 11/10/2011 05:59 AM, Ben Pfountz wrote: I would like to see support in trunk as well. In the meantime I have been using the patch Mark Deneen created, which adds support for everything except some of the LEDs and switches, see his email and thread for more info... https://lists.openwrt.org/pipermail/openwrt-devel/2011-August/011901.html We have been using these patches for months on many devices. See my addition patch to allow the same kernel to work on both the nh and nh2. I'd like to see the additional LED support too, but not sure I can justify the time to do it myself right now. If I clean up the common mtd code between the various boards which concat two partitions together, can we get this applied? I'll test any such patches of course. As an additional note, we're going to need the same thing on a300gh, since I'm getting one of those in next few days. I'll submit any work on that here, even if it's decided not to use it. ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel