Re: [OpenWrt-Devel] [PATCH] lantiq xway: generate ramdisk image by default
If you would that would be great. It is not essential, but that way all the necessary downloads would be in one place on the official openwrt site. Thank you, Ben On Sun, 2014-07-20 at 11:12 +0200, John Crispin wrote: i can build a ramdisk for the board for the reelase if it is needed to install. we do the same for the mikrotik boards. John On 20/07/2014 10:03, Ben Mulvihill wrote: No problem. I'll try to make sure there is a link to a non-official ramdisk image on the wiki. (Along with some installation instructions, which at the moment are lacking!) Ben On Sun, 2014-07-20 at 08:54 +0200, John Crispin wrote: technically correct. however there is a dependency bug left over from some cargo cult cleanups. this causes the image builder to not build when ramdisk is enabled. i plan to clean this up post BB. i will ignore this patch until said time. John On 19/07/2014 15:13, Ben Mulvihill wrote: The installation process on nand-based boards using ubi like the BTHOMEHUBV2B makes use of a ramdisk image, so it makes sense to generate this by default. Signed-off-by: Ben Mulvihill ben.mulvih...@gmail.com --- --- a/target/linux/lantiq/xway/target.mk 2014-07-19 14:59:39.691201637 +0200 +++ b/target/linux/lantiq/xway/target.mk 2014-07-19 12:40:06.101871732 +0200 @@ -1,7 +1,7 @@ ARCH:=mips SUBTARGET:=xway BOARDNAME:=XWAY -FEATURES:=squashfs atm mips16 nand ubifs +FEATURES:=squashfs atm mips16 nand ubifs ramdisk CPU_TYPE:=34kc CPU_SUBTYPE:=dsp ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] [PATCH] lantiq xway: generate ramdisk image by default
sure, i also just figured out why the rc1 lantiq images dont have dsl enabled by default. i will pusah a fix to trunk tonight once i tested it properly John On 21/07/2014 10:29, Ben Mulvihill wrote: If you would that would be great. It is not essential, but that way all the necessary downloads would be in one place on the official openwrt site. Thank you, Ben On Sun, 2014-07-20 at 11:12 +0200, John Crispin wrote: i can build a ramdisk for the board for the reelase if it is needed to install. we do the same for the mikrotik boards. John On 20/07/2014 10:03, Ben Mulvihill wrote: No problem. I'll try to make sure there is a link to a non-official ramdisk image on the wiki. (Along with some installation instructions, which at the moment are lacking!) Ben On Sun, 2014-07-20 at 08:54 +0200, John Crispin wrote: technically correct. however there is a dependency bug left over from some cargo cult cleanups. this causes the image builder to not build when ramdisk is enabled. i plan to clean this up post BB. i will ignore this patch until said time. John On 19/07/2014 15:13, Ben Mulvihill wrote: The installation process on nand-based boards using ubi like the BTHOMEHUBV2B makes use of a ramdisk image, so it makes sense to generate this by default. Signed-off-by: Ben Mulvihill ben.mulvih...@gmail.com --- --- a/target/linux/lantiq/xway/target.mk 2014-07-19 14:59:39.691201637 +0200 +++ b/target/linux/lantiq/xway/target.mk 2014-07-19 12:40:06.101871732 +0200 @@ -1,7 +1,7 @@ ARCH:=mips SUBTARGET:=xway BOARDNAME:=XWAY -FEATURES:=squashfs atm mips16 nand ubifs +FEATURES:=squashfs atm mips16 nand ubifs ramdisk CPU_TYPE:=34kc CPU_SUBTYPE:=dsp ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] [PATCH] lantiq xway: generate ramdisk image by default
technically correct. however there is a dependency bug left over from some cargo cult cleanups. this causes the image builder to not build when ramdisk is enabled. i plan to clean this up post BB. i will ignore this patch until said time. John On 19/07/2014 15:13, Ben Mulvihill wrote: The installation process on nand-based boards using ubi like the BTHOMEHUBV2B makes use of a ramdisk image, so it makes sense to generate this by default. Signed-off-by: Ben Mulvihill ben.mulvih...@gmail.com --- --- a/target/linux/lantiq/xway/target.mk 2014-07-19 14:59:39.691201637 +0200 +++ b/target/linux/lantiq/xway/target.mk2014-07-19 12:40:06.101871732 +0200 @@ -1,7 +1,7 @@ ARCH:=mips SUBTARGET:=xway BOARDNAME:=XWAY -FEATURES:=squashfs atm mips16 nand ubifs +FEATURES:=squashfs atm mips16 nand ubifs ramdisk CPU_TYPE:=34kc CPU_SUBTYPE:=dsp ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Re: [OpenWrt-Devel] [PATCH] lantiq xway: generate ramdisk image by default
No problem. I'll try to make sure there is a link to a non-official ramdisk image on the wiki. (Along with some installation instructions, which at the moment are lacking!) Ben On Sun, 2014-07-20 at 08:54 +0200, John Crispin wrote: technically correct. however there is a dependency bug left over from some cargo cult cleanups. this causes the image builder to not build when ramdisk is enabled. i plan to clean this up post BB. i will ignore this patch until said time. John On 19/07/2014 15:13, Ben Mulvihill wrote: The installation process on nand-based boards using ubi like the BTHOMEHUBV2B makes use of a ramdisk image, so it makes sense to generate this by default. Signed-off-by: Ben Mulvihill ben.mulvih...@gmail.com --- --- a/target/linux/lantiq/xway/target.mk2014-07-19 14:59:39.691201637 +0200 +++ b/target/linux/lantiq/xway/target.mk 2014-07-19 12:40:06.101871732 +0200 @@ -1,7 +1,7 @@ ARCH:=mips SUBTARGET:=xway BOARDNAME:=XWAY -FEATURES:=squashfs atm mips16 nand ubifs +FEATURES:=squashfs atm mips16 nand ubifs ramdisk CPU_TYPE:=34kc CPU_SUBTYPE:=dsp ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
[OpenWrt-Devel] [PATCH] lantiq xway: generate ramdisk image by default
The installation process on nand-based boards using ubi like the BTHOMEHUBV2B makes use of a ramdisk image, so it makes sense to generate this by default. Signed-off-by: Ben Mulvihill ben.mulvih...@gmail.com --- --- a/target/linux/lantiq/xway/target.mk2014-07-19 14:59:39.691201637 +0200 +++ b/target/linux/lantiq/xway/target.mk2014-07-19 12:40:06.101871732 +0200 @@ -1,7 +1,7 @@ ARCH:=mips SUBTARGET:=xway BOARDNAME:=XWAY -FEATURES:=squashfs atm mips16 nand ubifs +FEATURES:=squashfs atm mips16 nand ubifs ramdisk CPU_TYPE:=34kc CPU_SUBTYPE:=dsp ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel