Hi John,
I have to enable NAT with a MASQUERADING target,
and to block the GUI from WAN have to server bind only the bridge address.
Could anyone tell me how i can do it in the GUI itself.
You should probably ask this kind of questions on the openwrt-users mailing
list:
Hi,
I have to enable NAT with a MASQUERADING target,
and to block the GUI from WAN have to server bind only the bridge address.
Could anyone tell me how i can do it in the GUI itself.
Thanks Regards,
John
___
openwrt-devel mailing list
Hi,
Le 5 juil. 2015 20:20, John kerry kerry9...@gmail.com a écrit :
Hi ,
Hope you are doing great. I am working on Atheros QSDK.
You might get better support by contacting whoever maintains this QSDK ad
it is an OpenWrt derivative, however as far as OpenWrt is concerned, see
below.
i am
Hi
Any changes required to QSDK to compile successfully?
On Jul 6, 2015 11:21 AM, John kerry kerry9...@gmail.com wrote:
Hi ,
Hope you are doing great. I am working on Atheros QSDK. i am able to
compile the source code successfully and able to upgrade the firmware using
openWRT Luci GUI
Hi ,
Hope you are doing great. I am working on Atheros QSDK. i am able to
compile the source code successfully and able to upgrade the firmware using
openWRT Luci GUI too. The OpenWRT being a linux distro for embedded
platform already has IPtables implemented. Before compiling the source code
i
I have internet connections at eth0.2 and eth1.
Config is like this:
config interface wan
option ifname eth1
option protodhcp
After boot connection is ok. Computers behind router get NATed internet.
Then I do ifdown wan, change eth1 to eth0.2 and ifup wan.
Computers start
Also tried /etc/init.d/firewall restart after restarting the network?
Maddes
On 18.04.2010 16:38, Nuno Gonçalves wrote:
I have internet connections at eth0.2 and eth1.
Config is like this:
config interface wan
option ifname eth1
option protodhcp
After boot
You have to take care of it.
Maddes
On 18.04.2010 23:41, Nuno Gonçalves wrote:
From: Matthias Buecher / Germany m...@maddes.net
To: OpenWrt Development List openwrt-devel@lists.openwrt.org
Subject: Re: [OpenWrt-Devel] iptables NAT not being updated on WAN
changes
Message-ID