Hi, Here is support for the compact Asus WL-330gE. It uses that all-in-one 5354 Broadcom chip that's also in the WL-520gU, so I assume USB support can be soldered on. I've yet to open up the device, though. Initial flashing is done through the CFE failsafe mode like on other Asus devices, where you boot holding the reset button, the power LED flashes, and you tftp an image.
I'm recommending for inclusion in 8.09. Thanks, Dave Cooper Signed-off-by: David Cooper <d...@kupesoft.com> --- Index: package/broadcom-diag/src/diag.c =================================================================== --- package/broadcom-diag/src/diag.c (revision 14622) +++ package/broadcom-diag/src/diag.c (working copy) @@ -68,6 +68,7 @@ WLHDD, WL300G, WL320GE, + WL330GE, WL500G, WL500GD, WL500GP, @@ -307,6 +308,15 @@ { .name = "link", .gpio = 1 << 11, .polarity = REVERSE }, }, }, + [WL330GE] = { + .name = "ASUS WL-330gE", + .buttons = { + { .name = "reset", .gpio = 1 << 2 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 0, .polarity = REVERSE }, + }, + }, [WL500G] = { .name = "ASUS WL-500g", .buttons = { @@ -764,6 +774,8 @@ return &platforms[WL520GC]; if (startswith(buf,"WL520GU-")) /* WL520GU-* */ return &platforms[WL520GU]; + if (startswith(buf,"WL330GE-")) /* WL330GE-* */ + return &platforms[WL330GE]; } /* Based on "ModelId" */ Index: target/linux/brcm-2.4/base-files/etc/init.d/netconfig =================================================================== --- target/linux/brcm-2.4/base-files/etc/init.d/netconfig (revision 14622) +++ target/linux/brcm-2.4/base-files/etc/init.d/netconfig (working copy) @@ -57,6 +57,12 @@ c["wan_ifname"] = "" c["lan_ifname"] = "eth1" } + if (model == "ASUS WL-330gE") { + c["wan_ifname"] = "" + c["lan_ifname"] = "eth0" + c["vlan0ports"] = "" + c["vlan1ports"] = "" + } if (model == "ASUS WL-500g") { c["wan_ifname"] = "eth1" c["lan_ifname"] = "eth0" @@ -149,12 +155,14 @@ c["vlan1ports"] = "" } - print "#### VLAN configuration " - print "config switch eth0" - p("vlan0", "vlan0ports") - p("vlan1", "vlan1ports") - print "" - print "" + if (c["vlan0ports"] || c["vlan1ports"]) { + print "#### VLAN configuration " + print "config switch eth0" + p("vlan0", "vlan0ports") + p("vlan1", "vlan1ports") + print "" + print "" + } print "#### Loopback configuration" print "config interface loopback" print " option ifname \"lo\"" @@ -173,10 +181,16 @@ print " option netmask 255.255.255.0" print "" print "" - print "#### WAN configuration" - print "config interface wan" - p("ifname", "wan_ifname") - p("macaddr", "wan_macaddr") - print " option proto dhcp" + if (c["wan_ifname"]) { + print "#### WAN configuration" + print "config interface wan" + p("ifname", "wan_ifname") + p("macaddr", "wan_macaddr") + print " option proto dhcp" + } else { + print "#### WAN configuration (disabled)" + print "#config interface wan" + print "# option proto dhcp" + } }' > /etc/config/network } _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org http://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel