On 28/06/2014 15:49, Alpha Sparc wrote:
I notice that support for lantiq mips34kc is also rather flaky,
router somethings hangs and reboots abruptly... Is it possible to
port the 34kc patches from TP-Link TD-W8970 SDK to OpenWRT? Is
there a licensing issue. They have neatly place all
You can find it in /lantiq/target/linux/ltqcpe/
patches-2.6.32/
There is also /lantiq/target/linux/generic-2.6/patches-2.6.32/
But these are largely OpenWRT patches they are using in their SDK
except for 1 or 2.
We just need to refresh them up to 3.10 if there are no major changes.
On Sun, Jun
Hi,
i will postpone this patch till after BB. we will at that point fix up
the eep handling properly and merge/share the patches between ralink
and lantiq.
do you know if all the boards have the same eep in the filesystem or do
they differ between units ?
John
On 27/06/2014 19:05,
AFAIK there is only 1 model of GR7000 and the 2 units with me both
have a file called RT30xxEEPROM.bin which is 512 bytes in /tmp/.
No other partitions except mtd0 (uboot) and mtd1 (rootfs lzma).
For users who want to use openwrt this is a problem because they need
to extract the EEPROM by
As for your question if the EEPROM are the same for all units, I just
extract from 2 of my units and md5sum checks out the same.
On Sat, Jun 28, 2014 at 9:49 PM, Alpha Sparc alphasp...@gmail.com wrote:
AFAIK there is only 1 model of GR7000 and the 2 units with me both
have a file called
Move the Ralink EEPROM node into the PCI node to remove wmac failed
to load eeprom property message
--- a/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/lantiq/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -41,6 +41,9 @@ case $FIRMWARE in
