Hello,
today I tried to boot the latest trunk with my CubieboardA10, but I
cannot boot at all.
I followed this guide:
http://wiki.openwrt.org/doc/hardware/soc/soc.allwinner.sunxi
the most important stuff is:
dd if=openwrt-sunxi-Cubieboard-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8
then I
The Olimex A20 board boots fine with the 3.12 kernel in trunk, although
brings up 1 CPU only - what's the issue on the CB2?
Thank you. I've found the problem.
The old u-boot on the nand which supports fastboot doesn't boot a linux kernel
= 3.10.
You can see several kernel messages but it
Just one more question about the script.bin file.
I have a script.bin I built my self following instructions here:
http://linux-sunxi.org/FirstSteps
is OpenWrt buildroot also going to compile this file ?
The script.bin is a clone of devicetree developed by Allwinner. It's
similar to a dtb
Just one more question about the script.bin file.
I have a script.bin I built my self following instructions here:
http://linux-sunxi.org/FirstSteps
is OpenWrt buildroot also going to compile this file ?
The script.bin is a clone of devicetree developed by Allwinner. It's
similar to a dtb file.