Hello,
I own a dgn3500 adsl2 router from netgear and I'm trying to get
open-wrt running on this system. Currently the support for the system
is limited to booting and basic networking (which is already a very
nice starting point). My goal is to get the wireless working and after
that the spi
The correct pinout for this model is as follows from left to right it is RX
3,3V TX GND
On Sun, Dec 25, 2011 at 1:51 AM, Yakov Zaytsev ya...@illumos-mips.orgwrote:
i'm trying to get serial on dgn3500
i used the following pinout
..if you place the board in front of you with the eth ports facing away
from you.
On Thu, Dec 29, 2011 at 4:59 AM, Yakov Zaytsev ya...@illumos-mips.orgwrote:
The correct pinout for this model is as follows from left to right it is
RX 3,3V TX GND
On Sun, Dec 25, 2011 at 1:51 AM, Yakov
i'm trying to get serial on dgn3500
i used the following pinout
https://plus.google.com/photos/104120246985218478488/albums/5689759450555999777?banner=pwa
(also a picture of my lame soldering)
i use clone of nokia ca-42 to connect.
i know blogic succeeded with serial on this.
please, those