Re: ath79 / TP-Link CPE510 / tftp: recovery.bin

2021-11-12 Thread Bastian Bittorf
On Fri, Nov 12, 2021 at 11:12:03AM +0100, Vincent Wiemann wrote:
> > Press CTRL+B to enter SafeLoader: 1
> 
> Have you tried that?

yes, after this it asks for a password, which is not
'admin' or 'Admin' or 'tpl'...

___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


Re: ath79 / TP-Link CPE510 / tftp: recovery.bin

2021-11-12 Thread Vincent Wiemann

> Press CTRL+B to enter SafeLoader: 1

Have you tried that?

On 11/12/21 9:09 AM, Bastian Bittorf wrote:

After flashing trunk to some devices, i'am affected
from the lzma-loader/GCC11 issue. It was possible in
the past to use the standard recovery procedure, but
it seems NOT possible anymore, maybe because of
the changed partition layout?

The bootloader says:
Incorrect File.
Writting error.

Anyway: does somebody know how to access the bootloader?
The password 'admin' or 'tpl' is not accepted and
images are also not accepted.

I'am happy for any hint - thanks a lot,
bye, bastian!




TP-LINK SafeLoader (Build time: Jun 12 2015 - 09:49:53)
CPU: 560MHz AHB: 225MHz DDR: 64MB
Performing LED check..  PASS
Press CTRL+B to enter SafeLoader: 1
Flash Manufacturer: Unknown(0xc8)
Flash Device ID: Unknown(0x4017)
Data flash init failed.
open user-config failed.
open user-config failed.
Error: Kernel did not takeover charge of WatchDog last time!

enet0 port4 up

TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename 'recovery.bin'.
#
#
Done.
Bytes transferred = 5204617, 1373 Kbytes/sec
Incorrect File.
Writting error.
Allocated memory for elf segment ok: addr: 0x8006, size 0x16cc
Loading .text @ 0x8006 (5836 bytes)

Starting kernel



OpenWrt kernel loader for AR7XXX/AR9XXX
Copyright (C) 2011 Gabor Juhos 
Looking for OpenWrt image... found at 0xbf043000
Decompressing kernel...

(hangs here)

___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel



--
*
The information contained in this message and any
attachments may be privileged, confidential,
proprietary, protected by copyright law or by any
other means protected from disclosure and must
therefore not be publicly disclosed without prior
written consent..#&@#.
,#@&:%++%:&@#.
Follow the penguin!   #@&:%%010111%%:&@#
  Vincent Wiemann   (°> #@&:%0  0%:&@
 //\   #@&:%0  0%:
   +49-511582974V_/_ #@&:%0  100%
*

___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel


ath79 / TP-Link CPE510 / tftp: recovery.bin

2021-11-12 Thread Bastian Bittorf
After flashing trunk to some devices, i'am affected
from the lzma-loader/GCC11 issue. It was possible in
the past to use the standard recovery procedure, but
it seems NOT possible anymore, maybe because of
the changed partition layout?

The bootloader says:
Incorrect File.
Writting error.

Anyway: does somebody know how to access the bootloader?
The password 'admin' or 'tpl' is not accepted and
images are also not accepted.

I'am happy for any hint - thanks a lot,
bye, bastian!




TP-LINK SafeLoader (Build time: Jun 12 2015 - 09:49:53)
CPU: 560MHz AHB: 225MHz DDR: 64MB
Performing LED check..  PASS
Press CTRL+B to enter SafeLoader: 1
Flash Manufacturer: Unknown(0xc8)
Flash Device ID: Unknown(0x4017)
Data flash init failed.
open user-config failed.
open user-config failed.
Error: Kernel did not takeover charge of WatchDog last time!

enet0 port4 up

TFTP server address is 192.168.0.100; our address is 192.168.0.254
Get filename 'recovery.bin'.
#
#
Done.
Bytes transferred = 5204617, 1373 Kbytes/sec
Incorrect File.
Writting error.
Allocated memory for elf segment ok: addr: 0x8006, size 0x16cc
Loading .text @ 0x8006 (5836 bytes)

Starting kernel



OpenWrt kernel loader for AR7XXX/AR9XXX
Copyright (C) 2011 Gabor Juhos 
Looking for OpenWrt image... found at 0xbf043000
Decompressing kernel... 

(hangs here)

___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel