> 3. Drop section name
>It's not required by netifd or LuCI & it's not needed by this script
>as $device contains a single device name now.
It could be convenient to have it, though. In the former scheme of
things, if one would like to know the interface behind, say, lan it
was possible
Hi,
The network configuration migration in the 21.02 branch results in a
broken network configuration.
When I start with the following old network configuration:
-
config interface 'lan'
option type 'bridge'
option
Hi,
the following should do what you want.
config device
option type 8021q
option ifname bonding-lan
option vid 20
option name vlan20
config interface vlan20
option ifname vlan20
option proto static
option ipaddr 172.20.34.2
option netmask 255.255.255.128
~ Jo
signature.asc
From: Rafał Miłecki
Those are L2 options that are not part of interfaces (L3), should not be
set there and don't work. Setting MAC and MTU should be done at device
layer (config device) and is supported for basic types already.
Signed-off-by: Rafał Miłecki
---
Hi Daniel,
On 27.05.2021 12:37, Daniel Golle wrote:
Don't bail out from init script in case the GPS device is missing.
Some modems take time to come up, and some people may use things like
'kplex' to feed ugpsd. Hence it is better to always start ugpsd
unconditionally and let procd's respawn
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
A few nitpicks:
On 2021-05-28
On Fri, May 28, 2021 at 09:58:48AM +0200, Piotr Dymacz wrote:
> Hi Daniel,
>
> On 27.05.2021 12:37, Daniel Golle wrote:
> > Don't bail out from init script in case the GPS device is missing.
> > Some modems take time to come up, and some people may use things like
> > 'kplex' to feed ugpsd. Hence
From: Rafał Miłecki
1. Move code above interface generation
It results in more logical order. Device gets its config section
above interface section.
2. Drop the loop
We have separated code handling bridges now so $device should be
guaranteed to contain a single device name.
3. Drop
Hello Bas,
thank you for your review, please find my comments below.
On Fri, May 28, 2021 at 11:41 AM Bas Mevissen wrote:
> On 2021-05-28 00:27, Sergey Ryazanov wrote:
[skipped]
>> +static int rb4xx_nand_attach_chip(struct nand_chip *chip)
>> +{
>> + struct mtd_info *mtd =
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
On 2021-05-28 13:55, Sergey
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.--- Begin Message ---
Compile gdb with python support
Ah thanks! This worked great. I swear I tried something nearly identical before
that broke everything.
Mike
> On 2021/05/28, at 02:34:44 CDT (-05:00), Jo-Philipp Wich wrote:
>
> Hi,
>
> the following should do what you want.
>
> config device
> option type 8021q
> option ifname
12 matches
Mail list logo
