[OpenWrt-Devel] [PATCH 0/2] ar71xx: Add support for WD My Net Wi-Fi Range Extender

2013-11-02 Thread Christian Lamparter
as is, so I can start with the wiki page. Regards Christian Christian Lamparter (2): tools: adapt addpattern for WD's Range Extender ar71xx: add My Net Wi-Fi Range Extender device target/linux/ar71xx/base-files/etc/diag.sh | 3 + .../ar71xx/base-files/etc/uci-defaults/01_leds

[OpenWrt-Devel] [PATCH 2/2] ar71xx: add My Net Wi-Fi Range Extender device

2013-11-02 Thread Christian Lamparter
This patch adds a new device definition for a Western Digital device. The hardware seems to be based on Qualcomm Atheros DB120 design. Signed-off-by: Christian Lamparter chunk...@googlemail.com --- target/linux/ar71xx/base-files/etc/diag.sh | 3 + .../ar71xx/base-files/etc/uci-defaults

[OpenWrt-Devel] [PATCH 1/2] tools: adapt addpattern for WD's Range Extender

2013-11-02 Thread Christian Lamparter
A few things had to be changed to add support for these devices: - support code patterns with 8 characters - new board definition for the range extender device Signed-off-by: Christian Lamparter chunk...@googlemail.com --- tools/firmware-utils/src/addpattern.c | 22 +++--- 1

[OpenWrt-Devel] [PATCH 1/2] ar71xx: sysupgrade for My Net Wi-Fi Range Extender

2013-11-08 Thread Christian Lamparter
filesystem the reference checksum would have to be updated every time something on the fs changes... Obviously, this wouldn't be very practial. Luckily, the bootloader check can be defeated by modifying the TRX header after the flash. Signed-off-by: Christian Lamparter chunk...@googlemail.com

[OpenWrt-Devel] [PATCH 2/2] ar71xx: Use KEY_RESTART key code for the reset button on WD My Net N600 boards

2013-11-08 Thread Christian Lamparter
Signed-off-by: Christian Lamparter chunk...@googlemail.com --- target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c b/target/linux/ar71xx/files/arch/mips/ath79

Re: [OpenWrt-Devel] [PATCH 2/2] ar71xx: Use KEY_RESTART key code for the reset button on WD My Net N600 boards

2013-11-19 Thread Christian Lamparter
On Monday, November 11, 2013 09:14:23 AM Gabor Juhos wrote: 2013.11.08. 22:21 keltezéssel, Christian Lamparter írta: Signed-off-by: Christian Lamparter chunk...@googlemail.com Applied. Thanks. On a related note: Are there any news about [PATCH 1/2]? Or should this topic be discussed

[OpenWrt-Devel] [PATCH 1/2] ag71xx: add F1E specific feature bit definitions to AR934X register file

2013-11-23 Thread Christian Lamparter
tcp). Signed-off-by: Christian Lamparter chunk...@googlemail.com --- .../patches-3.10/601-MIPS-ath79-add-more-register-defines.patch | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/target/linux/ar71xx/patches-3.10/601-MIPS-ath79-add-more-register-defines.patch b

[OpenWrt-Devel] [PATCH 2/2] ar71xx: improve support for the My Net Wi-Fi Range Extender device

2013-11-23 Thread Christian Lamparter
board, which works. 2. Ethernet throughput is improved. iperf shows that the hardware can sustain more than 200Mbit/s and no longer drops any packages when the link is under load. Signed-off-by: Christian Lamparter chunk...@googlemail.com --- target/linux/ar71xx/files/arch/mips/ath79/mach-mynet

[OpenWrt-Devel] [PATCH] ar71xx: rssi leds for My Net WiFi Range Extender

2013-11-23 Thread Christian Lamparter
The device has three extra LEDs which indicate the quality of the wireless link. Thanks to rssileds, this feature now works out of the box. Signed-off-by: Christian Lamparter chunk...@googlemail.com --- target/linux/ar71xx/generic/profiles/wd.mk | 1 + 1 file changed, 1 insertion(+) diff --git

Re: [OpenWrt-Devel] AsiaRF AWM002 (ramips) USB and reboot broken at r44044

2015-02-02 Thread Christian Lamparter
Hello, On Tue, Feb 3, 2015 at 7:48 AM, Mingyu Li igv...@gmail.com wrote: Russell I just wanted to give a heads up that I built trunk r44245 last Russell night and discovered two problems: reboot no longer works, and Russell USB fails to enumerate a usb-serial device that worked Russell

Re: [OpenWrt-Devel] AsiaRF AWM002 (ramips) USB and reboot broken at r44044

2015-02-03 Thread Christian Lamparter
On Tue, Feb 3, 2015 at 9:20 AM, John Crispin blo...@openwrt.org wrote: On 03/02/2015 09:01, Christian Lamparter wrote: On Tue, Feb 3, 2015 at 8:43 AM, John Crispin blo...@openwrt.org wrote: On 03/02/2015 08:36, Christian Lamparter wrote: Thing is: ralink-phy.c can use some more work

[OpenWrt-Devel] [PATCH] ramips: add support for Intenso Memory 2 Move USB 3.0

2015-01-15 Thread Christian Lamparter
, or accessing the hdd directly). Wireless connectivity is provided by the rt5350 SoC [i.e.: 802.11n 1x1 2.4 GHz with a pcb antenna.] Serial, leds, wifi, ethernet and usb are tested and as far as I can tell: they are working fine (tm). Signed-off-by: Christian Lamparter chunk...@googlemail.com --- Any

[OpenWrt-Devel] [PATCH] ramips: improve and fix Memory 2 Move support

2015-01-20 Thread Christian Lamparter
the ramdisk/uImage image is generated by default for the rt3050 subtarget. This image is needed to flash OpenWrt for the first time onto the device via TFTP. Signed-off-by: Christian Lamparter chunk...@googlemail.com --- Note: I tried adding FEATURES+=ramdisk into the M2M Profile, but as far as I can tell

Re: [OpenWrt-Devel] [PATCH] ramips: add support for Intenso Memory 2 Move USB 3.0

2015-01-17 Thread Christian Lamparter
On Saturday, January 17, 2015 03:09:24 PM John Crispin wrote: On 17/01/2015 14:49, Christian Lamparter wrote: On Saturday, January 17, 2015 07:48:24 AM John Crispin wrote: On 15/01/2015 22:47, Christian Lamparter wrote: my question is: should I rename the profile (and the files

Re: [OpenWrt-Devel] [PATCH] ramips: add support for Intenso Memory 2 Move USB 3.0

2015-01-17 Thread Christian Lamparter
On Saturday, January 17, 2015 07:48:24 AM John Crispin wrote: On 15/01/2015 22:47, Christian Lamparter wrote: This adds support for a rt5350-based portable nas solution from Intenso. The board comes with 32M RAM and 8M Flash, the built-in HDD is connected/accessible via a usb3.0-sata

[OpenWrt-Devel] [PATCH] ralink: fix USB host function for Intenso M2M

2015-01-25 Thread Christian Lamparter
with: usb 1-1: device descriptor read/64, error -145 ... Signed-off-by: Christian Lamparter chunk...@googlemail.com --- This is the least intrusive version of the patch I could come up with. It looks like the ralink-phy.c could use some work. i.e.: +// reset_control_assert(rstdev

Re: [OpenWrt-Devel] [PATCH 1/3] ar71xx: rename and extend wrt160nl's trx partition parser

2015-03-06 Thread Christian Lamparter
Hello, On Thursday, March 05, 2015 09:13:37 PM John Crispin wrote: the patches should be self contained and buildable. if i understand 2/3 correct it is needed for the fixes in 1/3 to build. Thanks. I changed it again. The patches are now self contained. But I chose a bit of a different split

[OpenWrt-Devel] [PATCH 2/4] ar71xx: rename wrt160nl's trx partition parser

2015-03-06 Thread Christian Lamparter
This patch renames the partition parser from wrt160nl to more generic cybertan. Signed-off-by: Christian Lamparter chunk...@googlemail.com --- target/linux/ar71xx/config-3.14| 2 +- target/linux/ar71xx/config-3.18| 2 +- .../ar71xx/files/arch/mips

[OpenWrt-Devel] [PATCH 4/4] ar71xx: improve WD's My Net Wi-fi Range Extender image creation

2015-03-06 Thread Christian Lamparter
dynamically everytime. Reported-by: Pascal Paradis pepara...@yahoo.com Signed-off-by: Christian Lamparter chunk...@googlemail.com --- target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c | 12 +++- target/linux/ar71xx/image/Makefile | 4 ++-- 2 files

[OpenWrt-Devel] [PATCH 3/4] ar71xx: generalize cybertan partition parser

2015-03-06 Thread Christian Lamparter
By removing the NL16 signature check, the parser can be utilized by other devices like the WD My Net Wi-fi Range Extender. Signed-off-by: Christian Lamparter chunk...@googlemail.com --- target/linux/ar71xx/files/drivers/mtd/cybertan_part.c | 6 -- 1 file changed, 6 deletions(-) diff --git

[OpenWrt-Devel] [PATCH 1/4] ar71xx: fix WRT160NL and TP-Link partition parser patches

2015-03-06 Thread Christian Lamparter
405-mtd-tp-link-partition-parser.patch was updating the WRT160NL's partition parser Kconfig. This patch moves the relevant change into the right file: 404-mtd-wrt160nl-trx-parser.patch Signed-off-by: Christian Lamparter chunk...@googlemail.com --- .../linux/ar71xx/patches-3.14/404-mtd-wrt160nl

Re: [OpenWrt-Devel] [PATCH 1/4] ar71xx: fix WRT160NL and TP-Link partition parser patches

2015-03-11 Thread Christian Lamparter
On Fri, Mar 6, 2015 at 7:46 PM, Christian Lamparter chunk...@googlemail.com wrote: 405-mtd-tp-link-partition-parser.patch was updating the WRT160NL's partition parser Kconfig. This patch moves the relevant change into the right file: 404-mtd-wrt160nl-trx-parser.patch Signed-off-by: Christian

[OpenWrt-Devel] [PATCH 1/3] ar71xx: rename and extend wrt160nl's trx partition parser

2015-03-05 Thread Christian Lamparter
This patch re-purposes the functionality of the custom partition parser from Linksys' WRT160NL router. This way, WD's My Net Wi-fi Range Extender can make use of the same Cybertan partition layout. Signed-off-by: Christian Lamparter chunk...@googlemail.com --- target/linux/ar71xx/config-3.14

[OpenWrt-Devel] [PATCH 3/3] ar71xx: improve WD's My Net Wi-fi Range Extender image creation

2015-03-05 Thread Christian Lamparter
dynamically every time. Reported-By: Pascal Paradis pepara...@yahoo.com Signed-off-by: Christian Lamparter chunk...@googlemail.com --- target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c | 12 +++- target/linux/ar71xx/image/Makefile | 4 ++-- 2 files

[OpenWrt-Devel] [PATCH 2/3] ar71xx: update TP-Link partition parser patches to apply again

2015-03-05 Thread Christian Lamparter
wrt160nl's trx partition parser Signed-off-by: Christian Lamparter chunk...@googlemail.com --- .../patches-3.14/405-mtd-tp-link-partition-parser.patch | 13 ++--- .../patches-3.18/405-mtd-tp-link-partition-parser.patch | 13 ++--- 2 files changed, 4 insertions(+), 22 deletions

[OpenWrt-Devel] Rate limiting features of the ag71xx hardware

2015-06-06 Thread Christian Lamparter
On Friday, June 05, 2015 02:18:22 PM Dave Taht wrote: TX delay setting? What else can it do? Can't tell. Atheros' ethernet driver source is available in the GPL source for this device (but I guess this is nothing special. Version is: s17_ssdk_v1.0.4p1). My dream has been to find a way to set

[OpenWrt-Devel] [PATCH] ar71xx: fix 100/10mbps ethernet link issues on mynet range extender

2015-06-03 Thread Christian Lamparter
setting depending on the speed of the link. The 10mbps mode only needed the proper pll value, which was extracted from the vendor code. Reported-by: Pascal Paradis Signed-off-by: Christian Lamparter chunk...@googlemail.com --- .../ar71xx/files/arch/mips/ath79/mach-mynet-rext.c | 20 ...t-phy

Re: [OpenWrt-Devel] [PATCH] ar71xx: fix 100/10mbps ethernet link issues on mynet range extender

2015-06-09 Thread Christian Lamparter
On Tuesday, June 09, 2015 09:05:46 AM Florian Fainelli wrote: On Jun 9, 2015 7:36 AM, Christian Lamparter chunk...@googlemail.com wrote: On Wednesday, June 03, 2015 05:20:22 PM Christian Lamparter wrote: The mynet range extender hardware is suffering from ethernet link loss when

Re: [OpenWrt-Devel] [PATCH] ar71xx: fix 100/10mbps ethernet link issues on mynet range extender

2015-06-12 Thread Christian Lamparter
On Tuesday, June 09, 2015 09:24:41 PM Christian Lamparter wrote: On Tuesday, June 09, 2015 09:05:46 AM Florian Fainelli wrote: On Jun 9, 2015 7:36 AM, Christian Lamparter chunk...@googlemail.com wrote: On Wednesday, June 03, 2015 05:20:22 PM Christian Lamparter wrote: Actually, I

Re: [OpenWrt-Devel] [PATCH] ar71xx: fix kernel Oops in at803x_link_change_notify

2015-07-01 Thread Christian Lamparter
On Tuesday, June 30, 2015 05:35:12 PM Sven Eckelmann wrote: r45954 (ar71xx: fix 100/10mbps ethernet link issues on mynet range extender) introduced a pdata based modification of the tx_clk_dly. But it was not checked if pdata actually existed. This caused a page fault on all devices which

Re: [OpenWrt-Devel] [PATCH] ar71xx: fix kernel Oops in at803x_link_change_notify

2015-07-06 Thread Christian Lamparter
On Friday, July 03, 2015 12:29:32 PM Sven Eckelmann wrote: Sven, I've seen you did quite a bit of work on the OM5P-AN with the same F1E-PHY. I went through the code from Atheros' original driver SDK v17 (which was part of the GPL source for the mynet). Apart from tx delay handling,

[OpenWrt-Devel] [RFT/RFC] ar71xx: fix 100/10mbps ethernet link issues on mynet range extender

2015-05-26 Thread Christian Lamparter
TX delay setting depending on the speed of the link. The 10mbps mode only needed the proper pll value, which was extracted from the vendor code. Reported-by: Pascal Paradis Signed-off-by: Christian Lamparter chunk...@googlemail.com --- Openwrt-devs: Please let me know, if it is possible

Re: [OpenWrt-Devel] [PATCH] ar71xx: fix kernel Oops in at803x_link_change_notify

2015-07-14 Thread Christian Lamparter
On Tuesday, July 14, 2015 05:35:13 PM Chris Blake wrote: Not sure if this helps, but the recent Cisco Meraki AP drop includes a newish PHY driver for the at8033/8035. The GPL source is at http://dl.meraki.net/linux/meraki-firmware-sources-r23-20150601.tar.bz2 and a copy of the actual file

Re: [OpenWrt-Devel] [PATCH] ar71xx: fix kernel Oops in at803x_link_change_notify

2015-07-20 Thread Christian Lamparter
On 7/20/15, Sven Eckelmann s...@open-mesh.com wrote: On Monday 06 July 2015 13:26:21 Christian Lamparter wrote: Oh, I figured you have access to some of Qualcomm Atheros' SDKs and most importantly: some documentations from Qualcomm Atheros? I hoped you could confirm or disconfirm based

Re: [OpenWrt-Devel] [PATCH] Atheros AR8035-A support

2015-10-30 Thread Christian Lamparter
On Friday, October 30, 2015 03:25:02 PM Philippe DUCHEIN wrote: > Hi Conor, > yes, but at803x code, there is 20% of lost packets… clock delay is incorrect > into at803x file > then why don't you edit the existing at803x.c code instead? Note: - WD Range extender has a AR8035 chip (older chip -

Re: [OpenWrt-Devel] [PATCH v4 5/5] ar71xx: add support for Cisco's MR18

2015-09-22 Thread Christian Lamparter
On Monday, September 21, 2015 01:52:27 PM Karl Palsson wrote: > Chris R Blake wrote: > > From: Chris R Blake > > > > This patch adds support for Cisco's MR18. > > Detailed instructions for the flashing the device can > > be found in the OpenWrt

Re: [OpenWrt-Devel] [PATCH v5 1/5] ar71xx: add eth rx delay for qca955x platforms

2015-11-27 Thread Christian Lamparter
On Saturday, November 21, 2015 08:45:23 PM John Crispin wrote: > Hi, > > sorry to jump in this late at a V5 but i have a few concerns. see inline Well, the *beautiful thing* of this platform is that Cisco charges people a yearly fee if they want to stick with the original firmware. So people are

Re: [OpenWrt-Devel] [PATCH v5 1/5] ar71xx: add eth rx delay for qca955x platforms

2015-12-04 Thread Christian Lamparter
Ping. Any comments? what to do about ath79_setup_ar934x_eth_rx_delay. Leave it as is, or get rid of it? Regards, Christian On Friday, November 27, 2015 08:34:40 PM Christian Lamparter wrote: > On Saturday, November 21, 2015 08:45:23 PM John Crispin wrote: > > Hi, > > &g

[OpenWrt-Devel] [PATCH v6 1/6] base-files: use max_brightness to set LED

2015-12-05 Thread Christian Lamparter
From: Chris R Blake LEDs which are controlled by a PWM need to use the supplied max_brightness instead. Otherwise they might appear to be very dim / broken. Signed-off-by: Chris R Blake --- package/base-files/files/etc/init.d/led | 2 +- 1

[OpenWrt-Devel] [PATCH v6 0/6] add Cisco MR18 support

2015-12-05 Thread Christian Lamparter
This series adds support for Cisco Meraki's MR18 router [0]. It features: CPU: Atheros/Qualcomm QCA9557-AT4A at 720MHz RAM: 128 MiB DDR2 NAND Flash: Hynix NAND 128MiB 3,3V 8-bit Wireless: SoC AR9550 + 2x Atheros AR9582-AR1A (one 5Ghz, other 2.4Ghz/5Ghz) Ethernet: 1x Gigabit AR8035-A, 802.3af PoE

[OpenWrt-Devel] [PATCH v6 2/6] ar71xx: add rx/tx delay definitons for qca955x's MAC

2015-12-05 Thread Christian Lamparter
From: Chris R Blake This patch adds the rx/tx register offsets for the qca955x SoC. Signed-off-by: Chris R Blake --- .../742-MIPS-ath79-add-qca955x-mac-tx-rx-delay-defs.patch | 14 ++ 1 file changed, 14 insertions(+) create mode

[OpenWrt-Devel] [PATCH v6 4/6] ar71xx: add LED driver NU801

2015-12-05 Thread Christian Lamparter
From: Chris R Blake The MR18 uses a 3-channel 16-bit PWM Constant Current Driver for its status LED. Signed-off-by: Chris R Blake --- .../linux/ar71xx/files/drivers/leds/leds-nu801.c | 396 +

[OpenWrt-Devel] [PATCH v6 3/6] firmware-utils mkmerakifw: firmware generator for MR18

2015-12-05 Thread Christian Lamparter
From: Thomas Hebb This patch adds firmware generation tool for Cisco's MR18 Signed-off-by: Thomas Hebb --- tools/firmware-utils/Makefile | 1 + tools/firmware-utils/src/mkmerakifw.c | 263 ++ 2 files changed,

[OpenWrt-Devel] [PATCH v6 6/6] ar71xx: add support for Cisco's MR18

2015-12-05 Thread Christian Lamparter
;; nbg6716 | \ r6100 | \ wndr3700v4 | \ @@ -493,6 +497,9 @@ platform_pre_upgrade() { wndr4300 ) nand_do_upgrade "$1" ;; + mr18) + merakinand_do_upgrade "$1" + ;; esac }

[OpenWrt-Devel] [PATCH v6 5/6] ar71xx: scan nand ubi partition for ath9k eeprom files

2015-12-05 Thread Christian Lamparter
From: Chris R Blake The MR18 stores the ath9k eeprom values on the NAND. This patch makes it possible to retrieve the images from there. Signed-off-by: Chris R Blake --- package/base-files/files/lib/functions/system.sh| 17

[OpenWrt-Devel] [PATCH] ar71xx: add support for Cisco's MR18

2015-12-11 Thread Christian Lamparter
ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index b001876..f9c5b8f 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -98,6 +98,7 @@ obj-$(CONFIG_ATH79_MACH_HORNET_UB)+= mach-hornet

Re: [OpenWrt-Devel] [PATCH] ar71xx: add support for Cisco's MR18

2015-12-12 Thread Christian Lamparter
On Saturday, December 12, 2015 07:28:35 AM John Crispin wrote: > > On 12/12/2015 01:15, Christian Lamparter wrote: > > From: Chris R Blake <chrisrblak...@gmail.com> > > > > This patch adds support for Cisco's MR18. > > Detailed instructions for the

Re: [OpenWrt-Devel] [PATCH] ar71xx: add support for Cisco's MR18

2015-12-12 Thread Christian Lamparter
On Saturday, December 12, 2015 03:03:55 PM John Crispin wrote: > > On 12/12/2015 12:32, Christian Lamparter wrote: > > On Saturday, December 12, 2015 07:28:35 AM John Crispin wrote: > >> > >> On 12/12/2015 01:15, Christian Lamparter wrote: > >>> Fr

[OpenWrt-Devel] [PATCH v7 1/5] ar71xx: add rx/tx delay definitons for qca955x's MAC

2015-12-11 Thread Christian Lamparter
From: Chris R Blake This patch adds the rx/tx register offsets for the qca955x SoC. Signed-off-by: Chris R Blake --- .../742-MIPS-ath79-add-qca955x-mac-tx-rx-delay-defs.patch | 14 ++ 1 file changed, 14 insertions(+) create mode

[OpenWrt-Devel] [PATCH v7 3/5] ar71xx: scan nand ubi partition for ath9k eeprom files

2015-12-11 Thread Christian Lamparter
From: Chris R Blake The MR18 stores the ath9k eeprom values on the NAND. This patch makes it possible to retrieve the images from there. Signed-off-by: Chris R Blake --- package/base-files/files/lib/functions/system.sh| 17

[OpenWrt-Devel] [PATCH v7 2/5] ar71xx: refactor 10-ath9k-eeprom

2015-12-11 Thread Christian Lamparter
From: Chris R Blake move all library includes and 'firmware already exists' check to the top of the script. Signed-off-by: Chris R Blake --- .../ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 12 ++-- 1 file changed, 6

Re: [OpenWrt-Devel] [PATCH v6 0/6] add Cisco MR18 support

2015-12-11 Thread Christian Lamparter
Hello, On Friday, December 11, 2015 11:07:36 AM John Crispin wrote: > i merges 1-4 of this series. 4/6 seems to have a lot of comments that > were never addressed. please resend 5/6 and 6/6 with the comments fixed Thanks. We actually waited for a solution for the new image method. I think we

[OpenWrt-Devel] [PATCH v7 4/5] ar71xx: add support for Cisco's MR18

2015-12-11 Thread Christian Lamparter
;; nbg6716 | \ r6100 | \ wndr3700v4 | \ @@ -494,6 +498,9 @@ platform_pre_upgrade() { wndr4300 ) nand_do_upgrade "$1" ;; + mr18) + merakinand_do_upgrade "$1" + ;;

[OpenWrt-Devel] [PATCH v7 5/5] base-files: cleanup mtd_get_mac_binary hexdump

2015-12-11 Thread Christian Lamparter
From: Chris R Blake Remove usage of dd, as per request from Yousong Zhou. Signed-off-by: Chris R Blake --- package/base-files/files/lib/functions/system.sh | 2 +- 1

[OpenWrt-Devel] [PATCH v7 0/5] add Cisco MR18 support

2015-12-11 Thread Christian Lamparter
This series adds support for Cisco Meraki's MR18 router [0]. It features: CPU: Atheros/Qualcomm QCA9557-AT4A at 720MHz RAM: 128 MiB DDR2 NAND Flash: Hynix NAND 128MiB 3,3V 8-bit Wireless: SoC AR9550 + 2x Atheros AR9582-AR1A (one 5Ghz, other 2.4Ghz/5Ghz) Ethernet: 1x Gigabit AR8035-A, 802.3af PoE

Re: [OpenWrt-Devel] [PATCH] ar71xx: add support for Cisco's MR18

2015-12-17 Thread Christian Lamparter
Hello, On Saturday, December 12, 2015 04:06:51 PM Christian Lamparter wrote: > On Saturday, December 12, 2015 03:03:55 PM John Crispin wrote: > > which ones are missing ? i merged a total of 5 now. > here they are (the missing ones): > > "ar71xx: refactor 10

[OpenWrt-Devel] [PATCH v8 1/3] ar71xx: refactor 10-ath9k-eeprom

2015-12-17 Thread Christian Lamparter
From: Chris R Blake move all library includes and 'firmware already exists' check to the top of the script. Signed-off-by: Chris R Blake --- .../ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 12 ++-- 1 file changed, 6

[OpenWrt-Devel] [PATCH v8 3/3] base-files: cleanup mtd_get_mac_binary hexdump

2015-12-17 Thread Christian Lamparter
From: Chris R Blake Remove usage of dd, as per request from Yousong Zhou. Signed-off-by: Chris R Blake --- package/base-files/files/lib/functions/system.sh | 2 +- 1

[OpenWrt-Devel] [PATCH v8 2/3] ar71xx: scan nand ubi partition for ath9k eeprom files

2015-12-17 Thread Christian Lamparter
From: Chris R Blake The MR18 stores the ath9k eeprom values on the NAND. This patch makes it possible to retrieve the images from there. Signed-off-by: Chris R Blake --- package/base-files/files/lib/functions/system.sh| 17

[OpenWrt-Devel] [PATCH v8 0/3] complete Cisco MR18 support

2015-12-17 Thread Christian Lamparter
This series completes the support for Cisco Meraki's MR18 router [0]. It features: CPU: Atheros/Qualcomm QCA9557-AT4A at 720MHz RAM: 128 MiB DDR2 NAND Flash: Hynix NAND 128MiB 3,3V 8-bit Wireless: SoC AR9550 + 2x Atheros AR9582-AR1A (one 5Ghz, other 2.4Ghz/5Ghz) Ethernet: 1x Gigabit AR8035-A,

[OpenWrt-Devel] [RFC] Fixing broke sysupgrade caused by r47878 (add mr18)

2015-12-12 Thread Christian Lamparter
The patch "ar71xx: add support for Cisco's MR18" unfortunately broke sysupgrade for non-nand ar71xx platforms. This is because the merakinand.sh was added to the base-files for the ar71xx platforms and it tries to load /lib/upgrade/nand.sh which is only present if procd-nand is selected (which

[OpenWrt-Devel] [PATCH v5 1/1] ar71xx: Add support for AirTight Networks C-55

2015-12-19 Thread Christian Lamparter
From: Chris Blake This patch is to add support for the AirTight Networks C-55 Access Point Signed-off-by: Chris R Blake --- v4 -> v5: * rebased on top of the MR18 (and powercloud) changes. ---

[OpenWrt-Devel] [PATCH v9 0/3] complete Cisco MR18 support

2015-12-18 Thread Christian Lamparter
This series completes the support for Cisco Meraki's MR18 router [0]. It features: CPU: Atheros/Qualcomm QCA9557-AT4A at 720MHz RAM: 128 MiB DDR2 NAND Flash: Hynix NAND 128MiB 3,3V 8-bit Wireless: SoC AR9550 + 2x Atheros AR9582-AR1A (one 5Ghz, other 2.4Ghz/5Ghz) Ethernet: 1x Gigabit AR8035-A,

[OpenWrt-Devel] [PATCH v9 3/3] base-files: cleanup mtd_get_mac_binary hexdump

2015-12-18 Thread Christian Lamparter
From: Chris R Blake Remove usage of dd, as per request from Yousong Zhou. Signed-off-by: Chris R Blake --- package/base-files/files/lib/functions/system.sh | 2 +- 1

[OpenWrt-Devel] [PATCH v9 1/3] ar71xx: refactor 10-ath9k-eeprom

2015-12-18 Thread Christian Lamparter
From: Chris R Blake move all library includes and 'firmware already exists' check to the top of the script. Signed-off-by: Chris R Blake --- .../ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 12 ++-- 1 file changed, 6

[OpenWrt-Devel] [PATCH v9 2/3] ar71xx: scan nand ubi partition for ath9k eeprom files

2015-12-18 Thread Christian Lamparter
From: Chris R Blake The MR18 stores the ath9k eeprom values on the NAND. This patch makes it possible to retrieve the images from there. Signed-off-by: Chris R Blake --- package/base-files/files/lib/functions/system.sh| 17

Re: [OpenWrt-Devel] [PATCH 2/2] kernel: add at803x fix for sgmii mode

2015-12-20 Thread Christian Lamparter
Hello, On Sunday, December 20, 2015 02:30:39 AM Roman Yeryomin wrote: > Some (possibly broken) bootloaders incorreclty initialize at8033 > phy. This patch enables sgmii autonegotiation mode. > > Signed-off-by: Roman Yeryomin > --- Can you tell us a bit about the "possibly

[OpenWrt-Devel] ramips: mtk_soc_eth vs old ralink ethernet driver for the M2M

2015-12-19 Thread Christian Lamparter
Hello, I'm looking into a issue with M2M [0] (It's a RT5350 device). Currently, the sole ethernet - port on this device is not working. Instead during, I get the following messages on the serial: "Failed to connect to the switch. Use the "list" command to see which switches are available."

Re: [OpenWrt-Devel] [PATCH 2/2] kernel: add at803x fix for sgmii mode

2015-12-20 Thread Christian Lamparter
Hello, On Sunday, December 20, 2015 08:20:12 PM Roman Yeryomin wrote: > On 20 December 2015 at 15:13, Christian Lamparter > <chunk...@googlemail.com> wrote: > > On Sunday, December 20, 2015 02:30:39 AM Roman Yeryomin wrote: > >> Some (possibly broken) bootloaders in

Re: [OpenWrt-Devel] [RFC 2/3] kernel: owl-loader for delayed Atheros ath9k fixup

2016-03-09 Thread Christian Lamparter
On Wednesday, March 09, 2016 07:59:28 AM Martin Blumenstingl wrote: > On Wed, Mar 9, 2016 at 12:14 AM, Christian Lamparter > <chunk...@googlemail.com> wrote: > > Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway) > > need to be able to initial

Re: [OpenWrt-Devel] [RFC 2/3] kernel: owl-loader for delayed Atheros ath9k fixup

2016-03-10 Thread Christian Lamparter
On Wednesday, March 09, 2016 11:29:54 PM Martin Blumenstingl wrote: > On Wed, Mar 9, 2016 at 6:30 PM, Christian Lamparter > <chunk...@googlemail.com> wrote: > > lantiq on the other hand has copied the func from ar71xx and adapted > > and renamed it, but kept the signatur

[OpenWrt-Devel] [RFC 3/3] ar71xx: add support for Cisco Meraki Z1 Cloud Managed Teleworker Gateway

2016-03-08 Thread Christian Lamparter
79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_NFC + select ATH79_DEV_USB + select ATH79_DEV_WMAC + select LEDS_NU801 + config ATH79_MACH_ZCN_1523H bool "Zcomax ZCN-1523H support" select SOC_

[OpenWrt-Devel] [RFC 2/3] kernel: owl-loader for delayed Atheros ath9k fixup

2016-03-08 Thread Christian Lamparter
. However,this isn't possible for devices which have the init code for the Atheros chip stored on NAND. Hence, this module can be used to initialze the chip when the user-space is ready to extract the init code. Signed-off-by: Christian Lamparter <chunk...@googlemail.com> --- Note: We tried s

[OpenWrt-Devel] [RFC 1/3] firmware-utils mkmerakifw: firmware generator for Z1

2016-03-08 Thread Christian Lamparter
This patch adds firmware generation tool for Cisco's Z1 Signed-off-by: Christian Lamparter <chunk...@googlemail.com> --- tools/firmware-utils/src/mkmerakifw.c | 313 -- 1 file changed, 258 insertions(+), 55 deletions(-) diff --git a/tools/firmware-uti

[OpenWrt-Devel] [PATCH 0/3] add support for Cisco Z1

2016-04-07 Thread Christian Lamparter
t; [2] <http://wiki.openwrt.org/toh/meraki/z1> Chris Blake (1): ar71xx: add support for Cisco Meraki Z1 Cloud Managed Teleworker Gateway Christian Lamparter (2): firmware-utils mkmerakifw-old: firmware generator for Z1 kernel: owl-loader for delayed Atheros ath9k fixup package/kernel/o

[OpenWrt-Devel] [PATCH 1/3] firmware-utils mkmerakifw-old: firmware generator for Z1

2016-04-07 Thread Christian Lamparter
This patch adds firmware generation tool for Cisco's Z1 Signed-off-by: Christian Lamparter <chunk...@googlemail.com> --- tools/firmware-utils/Makefile | 1 + tools/firmware-utils/src/mkmerakifw-old.c | 369 ++ 2 files changed, 370 insertions(+)

[OpenWrt-Devel] [PATCH 3/3] ar71xx: add support for Cisco Meraki Z1 Cloud Managed Teleworker Gateway

2016-04-07 Thread Christian Lamparter
"Meraki Z1 board support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_NFC + select ATH79_DEV_USB + select ATH79_DEV_WMAC +

[OpenWrt-Devel] [PATCH 2/3] kernel: owl-loader for delayed Atheros ath9k fixup

2016-04-07 Thread Christian Lamparter
. However,this isn't possible for devices which have the init code for the Atheros chip stored on NAND in an UBI volume. Hence, this module can be used to initialze the chip when the user-space is ready to extract the init code. Signed-off-by: Christian Lamparter <chunk...@googlemail.com> --- I in

[OpenWrt-Devel] [PATCH v2] brcm2708: implement sysupgrade image check

2016-04-07 Thread Christian Lamparter
-by: Christian Lamparter <chunk...@googlemail.com> --- .../linux/brcm2708/base-files/lib/upgrade/platform.sh | 17 - 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/target/linux/brcm2708/base-files/lib/upgrade/platform.sh b/target/linux/brcm2708/base-files/lib/u

[OpenWrt-Devel] [PATCH] brcm2708: Implement sysupgrade image check

2016-04-07 Thread Christian Lamparter
. The platform check supports both gzipped and raw images. Signed-off-by: Christian Lamparter <chunk...@googlemail.com> --- .../linux/brcm2708/base-files/lib/upgrade/platform.sh | 17 - 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/target/linux/brcm2708/base-fil

[OpenWrt-Devel] [RFC 0/3] add Cisco Z1 support

2016-03-08 Thread Christian Lamparter
t; [2] <http://wiki.openwrt.org/toh/meraki/z1> Chris Blake (1): ar71xx: add support for Cisco Meraki Z1 Cloud Managed Teleworker Gateway Christian Lamparter (2): firmware-utils mkmerakifw: firmware generator for Z1 kernel: owl-loader for delayed Atheros ath9k fixup package/kernel/o

Re: [OpenWrt-Devel] How to initialize multiple phy radios

2016-04-24 Thread Christian Lamparter
On Sunday, April 24, 2016 01:16:11 AM David Hutchison wrote: > I spoke too soon: > https://pci-ids.ucw.cz/read/PC/168c/0050 > > It is the QCA9887, so it's definitely on the PCIe bus and is being seen. Does ath10k support the QCA9887? I see no entry for this pci-id (168c:0050) in ath10k's pci

Re: [OpenWrt-Devel] How to initialize multiple phy radios

2016-04-25 Thread Christian Lamparter
Hello, On Monday, April 25, 2016 10:53:41 AM David Hutchison wrote: > So with some modifications to pci.c, hw.h and core.c I was able to get > the radio initialized! :) Hey, that's nice! Can you make and post a patch for that? I'm sure if it's just a matter of adding the new pci and chip ids to

Re: [OpenWrt-Devel] How to initialize multiple phy radios

2016-04-22 Thread Christian Lamparter
Hello, On Friday, April 22, 2016 02:03:01 AM David Hutchison wrote: > I have been working on a board port and have everything working except > for the 2nd radio. This board has a QCA9531 CPU and 2 WiFi Radios: > AR9531 and a QCA9887 ( http://routerboard.com/RB952Ui-5ac2nD for more > details ). >

Re: [OpenWrt-Devel] How to initialize multiple phy radios

2016-04-26 Thread Christian Lamparter
On Tuesday, April 26, 2016 07:20:32 AM Valo, Kalle wrote: > Christian Lamparter <chunk...@googlemail.com> writes: > > On Monday, April 25, 2016 10:53:41 AM David Hutchison wrote: > >> So with some modifications to pci.c, hw.h and core.c I was able to get > >> the

Re: [OpenWrt-Devel] ipq40xx cpu frequency

2018-05-05 Thread Christian Lamparter
Hello, On Friday, May 4, 2018 4:12:16 PM CEST Roman Yeryomin wrote: > I'm seeing this > > [1.275858] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: > 632000 KHz > [1.276620] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency > changed to: 716000 KHz Sorry, but I'm

[OpenWrt-Devel] [PATCH 3/4] ipq40xx: fix OpenMesh A62 dtc warnings

2018-06-07 Thread Christian Lamparter
ci_bridge' Cc: Sven Eckelmann Signed-off-by: Christian Lamparter --- .../arch/arm/boot/dts/qcom-ipq4019-a62.dts | 14 ++ 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx

[OpenWrt-Devel] [PATCH 2/4] ipq40xx: fix dtc warning about /soc/ad-hoc-bus missing a unit name

2018-06-07 Thread Christian Lamparter
This patch fixes a dtc warning that shows up for every device Warning (unit_address_vs_reg): Node /soc/ad-hoc-bus has a reg or ranges property, but no unit name Signed-off-by: Christian Lamparter --- .../ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-bus.dtsi | 2 +- 1 file changed, 1

[OpenWrt-Devel] [PATCH 1/4] ipq40xx: set #size-cells to 0 to fix warning

2018-06-07 Thread Christian Lamparter
er Signed-off-by: Christian Lamparter --- .../files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-4.14/arch/arm/boo

[OpenWrt-Devel] [PATCH 4/4] ipq40xx: flesh out MR33's pcie dts definitions

2018-06-07 Thread Christian Lamparter
Signed-off-by: Christian Lamparter --- .../arch/arm/boot/dts/qcom-ipq4029-mr33.dts | 13 + 1 file changed, 13 insertions(+) diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029

Re: [OpenWrt-Devel] [PATCH] ramips: mt7621: Fix some cosmetic DTC warnings

2018-06-07 Thread Christian Lamparter
On Thursday, June 7, 2018 7:31:23 PM CEST Rosen Penev wrote: > device_type = "pci"; hm, just a heads-up: "device_type" have been mostly deprecated [0]. |The device_type property was used in IEEE 1275 to describe the device’s |FCode programming model. Because |spec| does

[OpenWrt-Devel] [PATCH] mtd-utils: revert faulty upstream patch for now

2018-06-07 Thread Christian Lamparter
-list thread: <http://lists.infradead.org/pipermail/linux-mtd/2018-June/081562.html> Cc: John Crispin Reported-by: L. Wayne Leach Signed-off-by: Christian Lamparter --- Affects OpenWrt 18.06 as well. so please backport this patch. Forum thread: https://forum.lede-project.org/t/merak

Re: [OpenWrt-Devel] LEDE 17.01.5 release planning

2018-05-27 Thread Christian Lamparter
On Thursday, May 24, 2018 9:06:55 PM CEST Hauke Mehrtens wrote: > We would like to create a lede 17.01.5 release soon, the last release, > lede 17.01.4, was done on 18. October 2017 which was a long time ago. > We are planning to do the build by end of next week, around 2. June 2018. > > This

Re: [OpenWrt-Devel] MR24 sysupgrade seems to be broken

2018-07-02 Thread Christian Lamparter
On Sunday, July 1, 2018 2:26:35 AM CEST Russell Senior wrote: > Here is what shows during sysupgrade: > > https://pastebin.com/YfbQZ5fB > Have you tried the aforementioned fix for the buggy mtd-utils on your old/existing installation or not? > On Sat, Jun 30, 2018 at 6:49 AM, Chri

Re: [OpenWrt-Devel] MR24 sysupgrade seems to be broken

2018-06-30 Thread Christian Lamparter
On Saturday, June 30, 2018 10:06:21 AM CEST Russell Senior wrote: > I just tried updating a Meraki MR24 to current master, from an image a few > months old and it broke. I get a new kernel, but an old rootfs. I have > some of these deployed where a serial connection is awkward. It would be >

[OpenWrt-Devel] [PATCH 2/2] apm821xx: backport and reassign crypto4xx patches

2018-04-28 Thread Christian Lamparter
reassigned to fit into the series. Signed-off-by: Christian Lamparter <chunk...@gmail.com> --- ...shuffle-iomap-in-front-of-request_i.patch} | 0 ...-crypto4xx-support-Revision-B-parts.patch} | 0 ...o-crypto4xx-fix-missing-irq-devname.patch} | 0 ...4-crypto-crypto4xx-kill-MODULE_NAME

[OpenWrt-Devel] [PATCH 1/2] apm821xx: don't select swconfig for the MR24

2018-04-28 Thread Christian Lamparter
-by: Christian Lamparter <chunk...@gmail.com> --- target/linux/apm821xx/image/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/target/linux/apm821xx/image/Makefile b/target/linux/apm821xx/image/Makefile index 094c9e47de..1e94a40918 100644 --- a/target/linux/apm821xx

Re: [OpenWrt-Devel] [PATCH 2/3] ipq-wifi: select board-2.bin at runtime

2018-01-11 Thread Christian Lamparter
On Thursday, January 11, 2018 7:44:33 AM CET Mathias Kresin wrote: > 11.01.2018 07:23, Mathias Kresin: > > 10.01.2018 11:15, Thomas Hebb: > >> Currently, we solve the problem of different IPQ4019 boards needing > >> different sets of Wi-Fi calibration data (board-2.bin) by using an > >> ipq-wifi-*

Re: [OpenWrt-Devel] [PATCH] kernel: modules: fix kmod-regmap

2018-08-03 Thread Christian Lamparter
On Thursday, August 2, 2018 11:43:50 AM CEST Jonas Gorski wrote: > On 1 August 2018 at 22:44, Christian Lamparter wrote: >> On Wednesday, August 1, 2018 3:21:00 PM CEST Jonas Gorski wrote: >>> On 30/07/18 22:33, Christian Lamparter wrote: >>>> >>>

[OpenWrt-Devel] [PATCH] kernel: modules: fix kmod-regmap

2018-07-30 Thread Christian Lamparter
lpers.o: In function `regulator_is_enabled_regmap': |.../drivers/regulator/helpers.c:36: undefined reference to `regmap_read' |... Signed-off-by: Christian Lamparter --- package/kernel/linux/modules/other.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/package/kernel/linux

  1   2   3   4   >