-If the mountain will not come to Mahomet, Mahomet must go to the mountain
Quite a long time is not embedded in the support MR3420v2 in Trunk.
Enough reviews of the stability the device with the openwrt
firmware+this patch.
Forum:
https://forum.openwrt.org/viewtopic.php?id=41326
Ticket:
This patch was written by the example of similar platforms TP-LINK
Applying this patch, will unload the module leds_gpio, in order to use
additional GPIOs (13-17) for other purposes.
Ticket:
https://dev.openwrt.org/ticket/12732
The formatted html version of diff:
LAN1 and LAN2 LEDs not present (it pulled to ground via resistors) on
MR3040 and MR11U devices.
But this LEDs=GPIOs we canNOT control by default.
Сonfirmed: https://forum.openwrt.org/viewtopic.php?pid=193705#p193705
This little patch enabling ability to control GPIO14 and GPIO15:
Index:
Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
===
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
(revision
35934)
+++ target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
Index: target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
===
--- target/linux/ar71xx/base-files/etc/uci-defaults/01_leds (revision 35995)
+++ target/linux/ar71xx/base-files/etc/uci-defaults/01_leds (working copy)
@@
Error in using another MDIO(AP123 platform using only one GE1 device
for eth0 and eth1) for the router mr3420v2
From Dmesg:
[0.80] libphy: ag71xx_mdio: probed
[0.81] eth0: Atheros AG71xx at 0xb900, irq 4, mode:MII
[1.37] ag71xx ag71xx.0 eth0: invalid speed specified
[
have GPIO-button.
Signed-off-by: Dmytro dioptimi...@gmail.com
---
Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
===
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
(revision
36006
Detailed explanation:
MR3220-v1/MR3420-v1/WR841N-v7 routers have a common platform - AP99
Accordingly, the whole configuration of LEDs (WAN, LAN1-4, etc) should
be general.
In the u-boot for the platform AP99 - there are no profiles for
different devices.
Configuration for LEDs - general.
I have
://dev.openwrt.org/ticket/13201
thx to pepe2k
Signed-off-by: Dmytro dioptimi...@gmail.com
---
Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
===
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
Signed-off-by: Dmytro dioptimi...@gmail.com
---
Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
===
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c(revision 37080)
+++ target/linux/ar71xx
I apologize in advance for my bad English.
Problem Description Control USB Power on the device TL-MR3420v2.
Exactly found that the Power switch USB port controlled by GPIO4, but
the ability to control this GPIO4 (in output mode) - does not allow.
Are known patches that manage GPIO4 in Input mode,
Signed-off-by: Dmytro dioptimi...@gmail.com
---
diff.patch
Description: Binary data
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Signed-off-by: Dmytro dioptimi...@gmail.com
---
Index: target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
===
--- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
(revision
37859)
+++ target/linux
This time we took the information from the source of GPL:
http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg18970.html
Confirmed and tested:
https://dev.openwrt.org/ticket/13201#comment:41
Thanks to oguretsagressive for testing.
Signed-off-by: Dmytro dioptimi...@gmail.com
---
diff
Signed-off-by: Dmytro dioptimi...@gmail.com
---
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
index e376ae5..6d2654b 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
+++ b/target
15 matches
Mail list logo
