When trying to debug startup scripts its useful to see if the service
triggers are properly registered.
cheers
Derek
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
I'm running the latest LEDE snapshop on the sunxi platform. The 4.4
kernel is a nice upgrade.
While using the image I've noticed a few inconsistencies.
The WAN LED is missing on this platform, could be since this uses a USB
wifi adapter. I see from the wiki page the WAN leds seem to be
that indicate that
the hosts file can handle a lot more entries. Like
https://github.com/pi-hole/pi-hole Maybe just run pi-hole on openwrt.
Cheers
Derek
On 12/28/2016 02:21 PM, Dave Taht wrote:
On Tue, Dec 27, 2016 at 11:03 PM, TheWerthFam <thewerth...@gmail.com> wrote:
Thanks for the fe
this will work for my needs, I can put a second IP
address on the router and run pixelserv on it or something like that.
Cheers
Derek
On 12/29/2016 11:11 AM, Dave Taht wrote:
On Thu, Dec 29, 2016 at 8:09 AM, TheWerthFam <thewerth...@gmail.com> wrote:
Right now I'd rather not customize th
sites. I know no solution in perfect.
Cheers
Derek
On 12/27/2016 01:53 PM, philipp_s...@redfish-solutions.com wrote:
On Dec 26, 2016, at 10:32 AM, TheWerthFam <thewerth...@gmail.com> wrote:
Using the adblock set of scripts to block malware and porn sites. The porn
sites list is 800,000 e
Problem with this method is that it misses lots of HTTPS based sites. I
do already run squid though. Am I wrong that it will not proxy https
sites unless you use MITM type setup?
Thanks
On 12/26/2016 08:47 PM, Lucian Cristian wrote:
On 26.12.2016 19:32, TheWerthFam wrote:
Using the adblock
Using the adblock set of scripts to block malware and porn sites. The
porn sites list is 800,000 entries, about 10x the number of sites
adblock normally uses. With the full list of malware and porn domains
loaded, dnsmasq takes 115M of memory and normally sits around 50% CPU
usage with
I'm developing a web app for a configuration file with multiple sections
in the configuration file. In the web app I would like a new tab for
each TypedSection I define. For all the other luci web-apps I've seen,
there are only multiple tabs in one TypedSection.
When I define a tab under each
On 04/12/2018 07:02 AM, John Crispin wrote:
On 12/04/18 12:42, Kristian Evensen wrote:
Hello,
I have recently updated some ramips mt7621-devices (ZBT WG3526) to the
latest nightly. Almost everything seems to work fine, but using either
wifi interface in client mode seems triggers an oops.
Running latest development branch on my bpi-r1 my system for the past
few weeks and find that the system is crashing about every 36 hours. It
seems that it crashed when its under a little CPU load or multiple
processes are actually doing work. I run e2guargian and squid on my
router. When
Having problems using the ath10k/QCA988X for Compex WLE600VX mini pcie
wifi card to load in the APU X86 X64 system.
I've used the Compex 200 series card with good success, so wanted to try
a more up to date card with the 600 series.
I've tried the 18.06.1 and the latest trunk but I get the
Given that the first login via LuCI, on a fresh install, is not with a
password anyway. What if setting the initial password sets up
letsencrypt also. Then when letsencrypt's first successful cert install,
https gets enabled as the default and then requests the user reboot to
complete the
12 matches
Mail list logo
