On 07/01/2018 16:57, Fakity Fakfak wrote:
> [...]
> Is it okay for me to setup the ip address of br0 on two different RPi to be
> the same?
> [...]
Obviously not. [*]
Let me add the following:
=> the two bridges that you defined (and "connected" each-other) are
perfectly working regardless of
Thank you for your response these are very helpful.
I have setup a bridge on both Raspberry Pi for each to have the same
configuration.
My bridges (named br0 on both Raspberry Pi) have Eth0, Eth1, Eth2, and Eth3
attached.
Eth0 of both Pi are connected to each other using an ethernet cable.
Is
On 30/12/2017 04:26, Fakity Fakfak wrote:
> [...]
> The two raspberry pi is connected using an ethernet cable through each of
> the Pi's eth0 port. Other devices are connected using usb-to-eth cable.
So you have two "host" (RPi-A and RPi-B), each one with:
- one physical network
Пересылаемое сообщение
От кого: Fakity Fakfak <fakityfak...@mail.ru>
Кому: Damiano Verzulli <dami...@verzulli.it>
Дата: Суббота, 30 декабря 2017, 11:23 +08:00
Тема: Re[3]: [ovs-discuss] Connecting Two Physical Raspberry Pi Open vSwitch
Hello and thank you f
On 29/12/2017 14:29, Fakity Fakfak via discuss wrote:
> [...]
> connect a physical openvswitch (raspberry pi)
> [...]
> to extend the number of physical ports
> which I can use.
Hi Fakity,
can you better describe your infrastructure?
As far as I know, RPi has _ONE_ phisical interface,
I would like to connect a physical openvswitch (raspberry pi) to an existing
one (raspberry pi) in order to extend the number of physical ports which I can
use. I would only want to use one pox controller for my network topology. Any
suggestions on how can I work the matter?
My topology would
