Hi,
I've built FUSE, OWFS, etc. from source on a Debian (4.0) machine. I'm
using a DS9490R USB adapter from Hobby-Boards.com with (for now) one
DS18S20P wired directly to it (RJ-14 pin 3 (DQ) to chip pin 2, RJ-14 pin
4 to chip pin 1 (Gnd)).
As far as I can tell, everything is wired and
Hi Jason.
The most obvious test would be to disconnect your RJ-14 cable (and the
DS18S20 attached to it) and see if the bare DS9490R and it's internal DS2411
work ok.
Please report what you get. I suspect it's an unrecognized short circuit or
miswiring, but this is the first step in figuring it
Paul,
Thanks for the tip. I tried it and, sure enough, see an 81-family
DS1420. I'll try hacking together another cable and see how that works -
hopefully the problems will be fixed.
2 quick quesitons:
1) Do I need to restart OWFS after adding a device, or can I just keep
everything as is and
On Tue, Jun 3, 2008 at 9:55 PM, Jason Antman [EMAIL PROTECTED] wrote:
1) Do I need to restart OWFS after adding a device, or can I just keep
everything as is and plug in the temperature probe?
2) More important - am I correct in my findings that my DS18S20P
(sampled from Maxim) does NOT
