Well,
during seven years of usage/testing, I found the DS248x I2C-busmasters
to be the weakest available, especially with long wires..
Therefore I can only recommend to not use them outside a breadboard, a
DS2490/9490 (and many others) do perform much better;
Thats also the reason why I really do
>Are you powering this HC-SR04 through the bus? If yes, how much current
does it draw? This current has to flow back through the GND wire and >may
lift the GND level on the far end on long, thin GND wires an substantial
amount, creating communication problems.
>
>Kind regards
>
> Jan
The HC-
Am 02.04.2014 21:00, schrieb Jan Sennesael:
>
> The UTP is approximately 45m long, cat 5e. I am using wire nr 1/2 for
> gnd/+5V and 4/5 for 1wire/gnd (hobbyboard pinout). The sensor worked without
> problems on the tree setup (with a diy usb master), nothing else has
> changed.
>
> The other pair
