If I connect back to my PC-s serial port, it works, but not with the
routerboard's port. I've checked it many times.
the result when I run it on my pc:
***
[root@kako 1w]# ls -la
összesen 4
drwxr-xr-x. 1 root root8 febr 7 07.12 .
drwxr-xr-x. 3 root root 4096 febr 5 16.53 ..
drwx
I wouldn't worry about the Avahi messages, it isn't important.
How do you know the isn't a hardware error with the sensor? Wiring problem.
On Mon, Feb 6, 2012 at 2:28 PM, Kassai Istvan wrote:
> owhttpd also shows the same directory structure as the owfs mounts.
> Everything is there but the se
owhttpd also shows the same directory structure as the owfs mounts.
Everything is there but the sensor related subdirectory lacks.
So as far as I can understand, it means fuse works.
2012-02-06 19:59 keltezéssel, Roberto Spadim írta:
hum, try owhttpd and webbrowser to check if it's a fuse p
hum, try owhttpd and webbrowser to check if it's a fuse problem or not
2012/2/6 Kassai Istvan
> Hi,
>
> After you resolved this problem, I dicided to move this thermometer to a
> routerboard. I thought it won't be hard, but it was a mistake.
> I've installed an openwrt to a routerbord rb433ah,
Hi,
After you resolved this problem, I dicided to move this thermometer to a
routerboard. I thought it won't be hard, but it was a mistake.
I've installed an openwrt to a routerbord rb433ah, and prepared for
owfs. (Installed the packages needed like fuse, owfs etc)
I've disabled of course the s
Thanks Paul!
This way it's OK, works well!
Taks again
bye
2012-02-06 04:34 keltezéssel, Paul Alfille írta:
> The timeouts changed to accomodate handshaking on some embedded devices.
>
> Try:
> /opt/owfs/bin/owfs --passive=/dev/ttyS0 -m /mnt/1w --debug --8bit
--
about timeouts...
there´s somehere that explain what´s timeout is used with each bus master?
2012/2/6 Paul Alfille
> The timeouts changed to accomodate handshaking on some embedded devices.
>
> Try:
> /opt/owfs/bin/owfs --passive=/dev/ttyS0 -m /mnt/1w --debug --8bit
>
>
> On Sun, Feb 5, 2012 at
The timeouts changed to accomodate handshaking on some embedded devices.
Try:
/opt/owfs/bin/owfs --passive=/dev/ttyS0 -m /mnt/1w --debug --8bit
On Sun, Feb 5, 2012 at 12:03 PM, Kassai Istvan wrote:
> Hi folks!
>
> about 2 years ago I use owfs (2.7p19) continously. Previously I wanted
> to upgra
