Hi Andrew,
thanks for your answer. I still need syslog-ng to restart on all nodes after
the ClusterIp moved. I tried it like this:
Resource:
primitive res_SyslogNG lsb:syslog-ng \
op monitor interval=15s timeout=20s start-delay=15s
Clone:
clone cl-SyslogNG
Hello,
i now edited the syslog-ng Debian Init Script to fit the LSB spec. Now
it should be cluster ready. See the new Script version below. Feedback
is appreciated and I hope it helps somebody.
Hi,
i got a loggin application that is running on a active passive LAMP
Cluster. The server is working as a logging server form my
infrastructure. I configured syslog-ng to listen on all open ip
addresses. It is working fine but when i migrate the CLusterIP the
syslog-ng daemon doesn't
]
Slaves: [ pilot01-node1 ]
Clone Set: cl-pinggw
Started: [ pilot01-node1 pilot01-node2 ]
Monitor-Cluster (ocf::pacemaker:ClusterMon):Started pilot01-node1
Sebastian Koch
Von: Koch, Sebastian
Gesendet: Montag, 28. Juni 2010 10:53
An: 'The Pacemaker cluster resource manager
, Koch, Sebastian wrote:
Hi,
i got a small issue with the CLusterMon agent. The monitor
actions for this agent seem to fail (if i look into syslog,
you'll find it below) and i am not able to troubleshoot it. I
tried to start the agent on the failed node by hand but it
don't see startup
resource manager
Betreff: Re: [Pacemaker] rsc_op: Hard error - res_Nagios_monitor_0 failedwith
rc=6: Preventing res_Nagios from re-starting anywhere inthe cluster
On Wed, Jun 23, 2010 at 5:19 PM, Koch, Sebastian
sebastian.k...@netzwerk.de wrote:
Hi,
i got a 2 Node Cluster up and running
Hi,
i just added a new Howto to the ClusterLabs Wiki. I hope i'll find the
time to documentate all the other stuff i recently did with pacemaker
(current project).
http://www.clusterlabs.org/wiki/Nagios3_on_Pacemaker_DRBD
Feedback is appreciated.
Best Regards,
Sebastian Koch
Hi,
i got a 2 Node Cluster up and running and right know i am trying to
configure a Nagios3 Resource. Therefore i already fixed the nagios init
script as it dind't pass the LSB Compatibility Checks as described here:
http://www.clusterlabs.org/doc/en-US/Pacemaker/1.0/html/Pacemaker_Explai
,
Roberto
-Original Message-
From: Koch, Sebastian [mailto:sebastian.k...@netzwerk.de]
Sent: Friday, June 11, 2010 4:30 PM
To: The Pacemaker cluster resource manager
Subject: Re: [Pacemaker] Cluster split brain on vmware VSphere
Hi,
i read your entry and you wrote that you used
Hi,
currently i am trying to deploy my already running 2 node active/passive
LAMP Cluster to physical machines. I got several problems while
importing the config and therefore i often need to fully flush the
pacemaker config and top aste my edited version. Pacemaker always
complains that the
Hi,
i read your entry and you wrote that you used some adopted xen stonith scripts
to get it up and running under vmware. Could you share your expierences and
hjow you solved thatr issue?
Thanks in advance.
Sebastian Koch
Hi,
i was researching the whole vmware / stonith problem for a couple of days and i
did not find any reliable information or examples on how to implement stonith
with virtualized debian linux on vmware esx 4 guests. Does anybody have
experiences or advises on how to configure stonith for
: www.netzwerk.de
http://www.netzwerk.de/
NETZWERK GmbH, Kurze Str. 40, 70794 Filderstadt-Bonlanden
Geschäftsführer: Siegfried Herner, Hans-Baldung Luley, Olaf Müller-Haberland
Sitz der Gesellschaft: Filderstadt-Bonlanden, Amtsgericht Stuttgart HRB 225547,
WEEE-Reg Nr. DE 185 622 492
Von: Koch
run ps axf are there any child processes of CTS?
On Thu, Feb 4, 2010 at 7:16 PM, Koch, Sebastian
sebastian.k...@netzwerk.de wrote:
Hi,
i got a problem with testing my cluster. I got a working 2 Node Setup like
this:
Last updated: Thu Feb 4 19:08:38 2010
Stack: openais
-
Von: Andrew Beekhof [mailto:and...@beekhof.net]
Gesendet: Freitag, 5. Februar 2010 13:49
An: pacemaker@oss.clusterlabs.org
Betreff: Re: [Pacemaker] Cluster Test Suite CTS Pacemaker 1.2 notdoinganything
On Fri, Feb 5, 2010 at 12:03 PM, Koch, Sebastian
sebastian.k...@netzwerk.de wrote:
Hi, thanks
Hi,
i got a problem with testing my cluster. I got a working 2 Node Setup
like this:
Last updated: Thu Feb 4 19:08:38 2010
Stack: openais
Current DC: prolog01-node1 - partition with quorum
Version: 1.0.7-54d7869bfe3691eb723b1d47810e5585d8246b58
2 Nodes configured, 3
Hi,
i am kind of new in the whole cluster stuff but i would like to participateand
contribute. But the main questions in which country ;-)
Best Regards,
Sebastian Koch
NETZWERK GmbH
Fon: +49.711.220 5498 81
Mobil: +49.160.907 908 30
Hi,
i would like to contribute to your great project. I needed to figure out some
strange errors and misbehaviours while is was installing pacemaker, drbd on
debian. Therefor i would like to create HowTo which describes all the steps in
detail and saves some time for others (i spend 10 h
Hi,
thanks a lot especially fort he meta-attributes fix ;-)
Best Regards,
Sebastian Koch
NETZWERK GmbH
Fon: +49.711.220 5498 81
Mobil: +49.160.907 908 30
Fax: +49.711.220 5499 27
Email: sebastian.k...@netzwerk.de
Web:
Hi,
kind of funny. I tried the same right now and i got the same issue J
crm(live)configure# edit
INFO: resource references in location:cli-prefer-res_ClusterIP updated
INFO: resource references in colocation:col_ip_before_apache updated
INFO: resource references in
Hi,
i am kind of new to pacemaker. I am trying to configure a active/passive
pacemaker/drbd/mysql cluster. Preferably all resources should run on node1 if
available, if not they should migrate to node2. I already read all the howtos,
guides and now i reached the point were i hope to get
21 matches
Mail list logo