Hello Fabrice,
I'm doing wired authentication with cisco switches, packetfence is in vlan
enforcement mode.
I want to authenticate PCs via dot1x, since my cisco switches support dot1x
(and mab too, but let's talk about dot1x now; also, we are not talking about
captive portal in this issue).
Hello Fabrice,
short answer: No and no.
I just had the time to do a debug session. Since i did not change anything
there during my inital evaluation and after a short while of playing around
with realms and strip/nostrip option i started placing logger-debug statements
in radius.pm and finally
Hi Minh,
keep stuff simple for now and keep layer 2 reg and isol vlan so you
don't need ip helper.
You already created a reg (210) and isol (220) vlan so these 2 vlan must
be available on lan switches and core switches.
Your goal now is to be able to have an ip address when your device is on
Hello Fabrice,
With network diagram as my first posted, do i need to create vlan reg and iso
or other vlan on Lan switches and Core switches?
Which case i should use ip helper to point to pf?
Best regards,
-Original Message-
From: Durand fabrice fdur...@inverse.ca
Sent: 3/26/2015
