Re: [PacketFence-users] Using Multiple SNAT Interfaces Problem

Thanks Fabrice! I was able to get it working with that! Thanks, Joshua Nathan IT Administrator Black Forest Academy +49 (0) 7626-9161-630 On Wed, Oct 14, 2015 at 3:36 PM, Fabrice DURAND wrote: > Hello Joshua, > > you will need to configure iproute2 to do that. >

[PacketFence-users] no access to auth portal

Hello, I am using PF 5.3 802.1x + MAC auth. When I plug a device in the switch port ehich is set on VLAN 2 (reg) nothin happens after. Unable to get IP address from DHCP. No access to authorization portal. I posted my config below. Any help would be much appreciated. Thanks

[PacketFence-users] Suricata alerts to Packet Fence (Derek, Wuelfrath) (Boley, Chris)

Hi Derek progress report, DONE - You then need to configure syslog-ng to send a copy of the Suricata log to the PacketFence management IP address filter f_suricata { match('suricata:' value("MSGHDR")); }; destination d_suricata { tcp("192.168.5.10"); }; log { source(src);

Re: [PacketFence-users] Fwd: 802.1X + MAC Authentication

Hello, you issue is on the eth0 interface, it looks that the vlan 2 is not tagged on the switch port. If you check all the vlan interfaces there is no RX packets. Regards Fabrice Le 2015-10-15 16:31, Kristaps Dambergs a écrit : Hello, I am using PF 5.3 802.1x + MAC auth. When I plug a

Re: [PacketFence-users] AD users not authenticating through portal

Hello Morgan, first check in packetfence.log when you hit the captive portal : Instantiate profile ... Then paste your profiles.conf and authentication.conf (remove sensible information) Regards Fabrice Le 2015-10-14 12:06, Morgan, Darren a écrit : Hi, Probably a bit of a ‘noob’

[PacketFence-users] Fwd: 802.1X + MAC Authentication

Hello, I am using PF 5.3 802.1x + MAC auth. When I plug a device in the switch port ehich is set on VLAN 2 (reg) nothin happens after. Unable to get IP address from DHCP. No access to authorization portal. I posted my config below. Any help would be much appreciated. Thanks

Re: [PacketFence-users] Use vlan_filter to set voip attribute of a node

Hello, something like that should work [siemensphones] filter = node_info operator = match attribute = mac value = ^(00:1a:e8).* [1:siemensphones] scope = IsPhone role = default Regards Fabrice Le 2015-10-15 10:53, Dennis Bühring a écrit : Hi, i want to set the voip attribute for our

Re: [PacketFence-users] Using Multiple SNAT Interfaces Problem

Hello Joshua, maybe you can share what you did with iproute2 ;-) Regards Fabrice Le 2015-10-15 07:35, Nathan, Josh a écrit : Thanks Fabrice! I was able to get it working with that! Thanks, Joshua Nathan IT Administrator Black Forest Academy +49 (0) 7626-9161-630 On Wed, Oct 14, 2015 at

[PacketFence-users] Use vlan_filter to set voip attribute of a node

Hi, i want to set the voip attribute for our siemens phones via a vlan filter. I can match them [siemens_phones] filter = node_info operator = match attribute = mac value = ^(00:1a:e8).* But how do i set the voip attribute ? regards Dennis

Re: [PacketFence-users] Slow database and RADIUS Accounting not working

I'm still having this issue. Should I start a bug report? On Fri, Oct 9, 2015 at 1:18 PM, Chris Abel wrote: > I thought this was interesting: > > l# /usr/local/pf/bin/pfcmd service pfdhcplistener start > service|command > memcached|already started >

[PacketFence-users] Integration with iBoss SSO

Hi, Does anyone have any experience with integrating PF with iBoss. Have basic PF set up and working well with our network and authenticating though AD now and would like all devices to authenticate through the iBoss filter. Not really sure where to start on the iBoss side? Regards Darren