Any thought on my issue?
Cheers,
2015-10-17 12:54 GMT+03:00 Kristaps Dambergs :
> Thank you for your reply! I am new to switch configuration, bet seems like
> i have tagged VLAN 2 on switch ports 2-3.
> Here is info about vlan2:
>
> ProCurveSwitch# show vlan 2
>
>
Thank you for your reply! I am new to switch configuration, bet seems like
i have tagged VLAN 2 on switch ports 2-3.
Here is info about vlan2:
ProCurveSwitch# show vlan 2
Status and Counters - VLAN Information - Ports - VLAN 2
VLAN ID : 2
Name : Registration
Status : Port-based
Voice :
Hello,
you issue is on the eth0 interface, it looks that the vlan 2 is not
tagged on the switch port.
If you check all the vlan interfaces there is no RX packets.
Regards
Fabrice
Le 2015-10-15 16:31, Kristaps Dambergs a écrit :
Hello,
I am using PF 5.3 802.1x + MAC auth. When I plug a
Hello,
I am using PF 5.3 802.1x + MAC auth. When I plug a device in the switch
port ehich is set on VLAN 2 (reg) nothin happens after. Unable to get IP
address from DHCP. No access to authorization portal. I posted my config
below.
Any help would be much appreciated.
Thanks