Re: [PacketFence-users] MAC Authentication Bypass on Aruba CX 6300

> > Michael > > *Von:* Mark Okuno via PacketFence-users < > packetfence-users@lists.sourceforge.net> > *Gesendet:* Donnerstag, 11. Mai 2023 00:19 > *An:* packetfence-users@lists.sourceforge.net > *Cc:* Mark Okuno > *Betreff:* [PacketFence-users] MAC Authentication

Re: [PacketFence-users] MAC Authentication Bypass on Aruba CX 6300

: Mark Okuno via PacketFence-users Gesendet: Donnerstag, 11. Mai 2023 00:19 An: packetfence-users@lists.sourceforge.net Cc: Mark Okuno Betreff: [PacketFence-users] MAC Authentication Bypass on Aruba CX 6300 Hello PacketFence users, I currently have PacketFence configured to do dynamic VLAN

[PacketFence-users] MAC Authentication Bypass on Aruba CX 6300

Hello PacketFence users, I currently have PacketFence configured to do dynamic VLAN assignment on a fleet of HP/Aruba Procurve 5400s using MAC authentication bypass. I was wondering if anyone could confirm that they have been able to do the same on the Aruba CX 6xxx switches. Apparently the AOS

Re: [PacketFence-users] MAC Authentication

s Von: Schneider Lukas via PacketFence-users Gesendet: Freitag, 1. Juli 2022 12:36 An: packetfence-users@lists.sourceforge.net Cc: Schneider Lukas Betreff: [PacketFence-users] MAC Authentication Hi! I set up PacketFence 11.2 from the ZEN according to the installation guide and got

Re: [PacketFence-users] MAC Authentication

Hello Lukas, I’m no expert but it says: "Module-Failure-Message = "Rejected: Realm does not have at least one dot separator”” For Mac authentication the username = Mac address of the device only. Thanks, Ludovic Zammit Product Support Engineer Principal Cell: +1.613.670.8432 Akamai

Re: [PacketFence-users] MAC Authentication

-users Cc: Schneider Lukas Betreff: Re: [PacketFence-users] MAC Authentication Hello Lukas, I’m no expert but it says: "Module-Failure-Message = "Rejected: Realm does not have at least one dot separator”” For Mac authentication the username = Mac address of the device only. Thanks

Re: [PacketFence-users] MAC Authentication

problem by sticking to the documentation. I missed > adding „user-name-format without-domain“ to the „radius scheme packetfence“. > > Now the username comes in as Mac address only. > > Best, > Lukas > > Von: Zammit, Ludovic > Gesendet: Montag, 4. Juli 2022 18:04 >

[PacketFence-users] MAC Authentication

Hi! I set up PacketFence 11.2 from the ZEN according to the installation guide and got 802.1X authentication working on my H3C S5120 switch. But now I am struggling to get MAC authentication working for my non-802.1X capable devices like printers an phones. I create a node with the device's

Re: [PacketFence-users] MAC Authentication help pls

Hello Jose, I think you are correct. Thanks, Ludovic Zammit Product Support Engineer Principal Cell: +1.613.670.8432 Akamai Technologies - Inverse 145 Broadway Cambridge, MA 02142 Connect with Us:

Re: [PacketFence-users] MAC Authentication help pls

I tried with an other switch (Cisco SMB) and this worked so I think that this is a switch problem. Maybe this is because it is a virtualized switch. On Sun, Apr 24, 2022 at 7:15 PM José Ramos wrote: > Here is the switch configuration (testing so almost empty :)) > *aaa new-model* > *!* > *!* >

Re: [PacketFence-users] MAC Authentication help pls

Here is the switch configuration (testing so almost empty :)) *aaa new-model* *!* *!* *aaa group server radius packetfence* * server 192.168.1.100 auth-port 1812 acct-port 1813* *!* *aaa authentication login default local* *aaa authentication dot1x default group packetfence* *aaa authorization

Re: [PacketFence-users] MAC Authentication help pls

please paste your config on the switchport and the general settings on the switch. you can also use the log (sh log) to see what happens when you plug in something in the switch. April 21, 2022 8:30 AM, "José Ramos via PacketFence-users"

Re: [PacketFence-users] MAC Authentication help pls

Hello Jose, Please post here the switch port configuration. Thanks, Ludovic Zammit Product Support Engineer Principal Cell: +1.613.670.8432 Akamai Technologies - Inverse 145 Broadway Cambridge, MA 02142 Connect with Us:

[PacketFence-users] MAC Authentication help pls

Hello dear PacketFence users and developers ! I have successfully configured PacketFence with 802.1x (PF directly connected on the switch to manage). But I can't figure out how to to MAC authentication. I have enabled MAB on my Cisco switch and registered the MAC address in the node tab. But

Re: [PacketFence-users] MAC Authentication Rejected

Hmm. Pretty sure I had it disabled but I will test it again to make sure. Thanks! -Ryan This e-mail message together with any attachments or reply should not be considered private or confidential because it may be archived and subject to public disclosure under certain circumstances, such as

Re: [PacketFence-users] MAC Authentication Rejected

Hello Ryan, it looks that you enabled autoregister on the connection profile. Disable it and retry. Regards Fabrice Le 19-12-25 à 10 h 08, Ryan Radschlag via PacketFence-users a écrit : We're trying to get down to having one open ssid, having people be dumped into the registration vlan by

Re: [PacketFence-users] MAC Authentication fails on hp 1920

Hi Fabrice, yes, if I configure directly the vlan 3 on the port, I receive ip address. Yesterday finally I found the problem, it was the: "mac-vlan enable" attribute on the interface. This configuration makes exactly the opposite, if it is enabled, the switch does not assign the vlan to the

Re: [PacketFence-users] MAC Authentication fails on hp 1920

Hello Oscar, what happen if you configure a switch port in the vlan 3 and you plug a device in, does it receive an ip address ? Regards Fabrice Le 18-10-24 à 05 h 58, Oscar Nogales via PacketFence-users a écrit : Hi ! anyone with this switch model that has a working 802.1x+MAB with

Re: [PacketFence-users] MAC Authentication fails on hp 1920

Hi ! anyone with this switch model that has a working 802.1x+MAB with packetfence ? I have a 5 floor building with this model and I need to make it work. Thanks. -- Oscar Nogales Especialista en Comunicaciones y Seguridad El mié., 17 oct. 2018 a las 17:25, Oscar Nogales () escribió: > Hi

[PacketFence-users] MAC Authentication fails on hp 1920

Hi everyone, I'm working on a NAC deployment with Packetfence in offline mode. I have working the 802.1x authentication, but I want to do the MAC address authentication failover in case no 802.1x agent is connected to the switch. All my switches are HPE V1910-48G Switch with Software Version

Re: [PacketFence-users] MAC authentication

Hello Luca, when you do mac authentication, PacketFence will return access-accept but depending of the status of the device it will return the registration vlan or a prod vlan. When it return the registration vlan then the device will hit the portal to register. Regards Fabrice Le

[PacketFence-users] MAC authentication

Hi, I would like to configure mac authentication via Radius for not 802.11x aware devices. I don't understand how to do it. I have Extreme Networks switches that sends mac address to the Radius server to try to authenticate it. I would like that PacketFence reply an access-accept or