Hello,
this is normal, the dhcp can run only on 2 off them.
Regards
Fabrice
Le 2017-11-17 à 14:35, Tobias Friede via PacketFence-users a écrit :
> Hi,
>
> I have the same problem, maybe that behavior is normal?
>
> My Cluster is a PF 7.2 Cluster.
>
> Greetings
> Tobias
>
> 2017-11-17 16:34
Hi,
I have the same problem, maybe that behavior is normal?
My Cluster is a PF 7.2 Cluster.
Greetings
Tobias
2017-11-17 16:34 GMT+01:00 Stephen Appleby via PacketFence-users <
packetfence-users@lists.sourceforge.net>:
> I've created a 3 node PF cluster. On one of the nodes DHCP is not listed
I've created a 3 node PF cluster. On one of the nodes DHCP is not listed as a
service on the Status-Services page, and on the cluster status page that node's
DHCP service status
show unknown. If I run 'pfcmd service pf restart' on that node it doesn't list
the DHCP service either.
Any idea
Hello Pedro,
it looks that it's a reevaluation issue, can you provide the
packetfence.log ?
What controler/AP are you using in your POC ?
Regards
Fabrice
Le 2017-11-17 à 13:03, Pedro Trindade via PacketFence-users a écrit :
> Hello all, I've been trying to make a Packetfence 7.3.0 POC on a
Hi,
I've tested with Cisco 2960, same error.
I've found some difference in log:
correct auth credentials
1 Nov 17 10:03:37 NO authentication: SSH authentication failure [username:
newuser, IP address = 153.47.30.125]
2 Nov 17 10:03:37 WA authentication: Invalid Service Type: USER [
Hello all, I've been trying to make a Packetfence 7.3.0 POC on a Centos7.0
server.
However after the registration process the user is not redirected both in
ios and android devices.
Any help would be appreciated :)
Thanks,
Pedro C. Trindade
Hello Alessandro,
retry by removing this line:
$radius_reply_ref->{'Reply-Message'} = "Switch enable access granted by
PacketFence";
and also try with this line:
$radius_reply_ref->{'Zyxel-Privilege-AVPair'} = 'shell:priv-lvl=14';
cf:
Hum ok, really weird.
It looks that first when the device connect on the port 2/43 802.1x
failed so it start mac auth but just after that the port goes down and a
new request is coming from the port 5/3.
When this happen, can you check in the mac-address-table where is the
mac address (before
