Hello Fabrice, hello Antoine,
unfortunately, I can't configure Nac state. My WLC (ver. 5.0.148.0)
don't support the "Nac state" option.
Searching in documentation pages, I found:
- from
http://www.packetfence.org/documentation/pod/pf/Switch/Cisco/WLC_http.html :
...
Status
Developed and
Hello Umberto,
You can't use url redirect with your current version.
What you can only do is vlan enforcement.
Regards
Fabrice
Le 2015-12-11 04:32, Umberto Ciocca a écrit :
> Hello Fabrice, hello Antoine,
> unfortunately, I can't configure Nac state. My WLC (ver. 5.0.148.0)
> don't support the
OK, I will try it.
Thank you,
Umberto
Umberto Ciocca
Servizio Reti, Sistemi e Sicurezza
Università di Siena
Il 11/12/2015 14:33, Fabrice DURAND ha scritto:
Hello Umberto,
You can't use url redirect with your current version.
What you can only do is vlan enforcement.
Regards
Fabrice
Le
Hi Antoine,
I created two ACL :
- Pre-Auth-For-WebRedirect, as from the guide
- Pre-Auth_For_WebRedirect, a 'deny all' ACL (just for testing)
To avoid misconfiguration, now I have only the first ACL. Radius
authentication server is defined with support for RFC 3576 and WLAN has
the option
Hello Umberto,
did you configure Nac State: Radius NAC ?
Regards
Fabrice
Le 2015-12-10 07:32, Umberto Ciocca a écrit :
> Hi Antoine,
> I created two ACL :
> - Pre-Auth-For-WebRedirect, as from the guide
> - Pre-Auth_For_WebRedirect, a 'deny all' ACL (just for testing)
> To avoid
Hi Umberto,
The RADIUS request seems fine.
Can you reach the portal page? By manually input the URL redirect address in
your browser on the client.
Also can you make sure the option 'Nac State' in the 'Advanced' tab is in
'Radius NAC' .(SSID configuration)
Thanks,
On Thursday, December 10,
Hi all,
I’m trying to set up web authentication using a Cisco WLC 4402 ver.
5.0.148.0.
I have installed PacketFence 5.5.2 and followed the instructions for
"Wireless LAN Controller (WLC) Web Auth" from the Network configuration
guide.
When I open a browser I am not redirect to the captive
Hello Umberto,
You need to track down the device you are testing on the WLC, we can see
that PacketFence send the ACL for the URL redirect
"Pre-Auth_For_WebRedirect".
Does this device you are testing with have the ACL applied on the
WLC(client list)?
Does the ACL "Pre-Auth_For_WebRedirect"
