Hello,
I'm using the Falch.Net Developer Studio IDE and have problem to debug my
program. In fact, I put stop point on lines code but this don't do
anything. The program run as it was in normal (non debug) mode. I'm sure
that the lines where my stop is are executed.
Do I need to use a
Try writing to the DB. Won't that tell you?
BTW: Why bother supporting below 3.1? I'd say 95% of ppl are either running
3.1 or higher or capable of flashing their unit to 3.3 for free anyway.
Anyone else agree here??
3.1 is a definate - think of all the visors out there.. if you have
Just a thought - check if your code segment is too large.
I had similar problems. My application's code segment size was very near to
the 64k.
It was running fine on the POSE and real devices, but I was not able to
debug it with the POSE (I didn't try debugging on the real device).
Now it's a
"Alan Ingleby" [EMAIL PROTECTED] wrote in
36743@palm-dev-forum:
Try writing to the DB. Won't that tell you?
Actually, we are scanning all of the DBs. Maybe we could try turning off
the "Read Only" attribute? What do you think?
Alan Ingleby
"Rick Kier" [EMAIL PROTECTED] wrote in
Brian Mathis [EMAIL PROTECTED] wrote in 36748@palm-dev-forum:
Rick Kier wrote:
[...]
Any ideas on either: how to determine "DB in rom" on PalmOS 2.0 or
whether we should support PalmOS 2.0?
TeamSTARS
Dick Gordon and Rick Kier
Answers only bring more questions.
The answer is: what
Aaron Ardiri [EMAIL PROTECTED] wrote in 36752@palm-dev-forum:
3.1 is a definate - think of all the visors out there.. if you have
3.0 you can upgrade to 3.3 freely.. the default, is to support 3.0 -
however, if you can support 2.0 :) why not?
That was our thought too. If we can, why not?
I started this application in CodeWarrior as a PalmOS
3.1 stationery. My CW is of version 4.0.1.
Now I am trying to implement these bmp functions say,
BmpCreate, WinCreateBitmapWindow, etc.
When I a trying to compile my code, its giving
errors," cant convert int to struct* " .
Can anybody
When I a trying to compile my code, its giving
errors," cant convert int to struct* " .
Can anybody tell me why is this coming up.
One very basic thing how can I make sure that
Pilot.h which I am including, handles New feature
sets...
C programming 101 :) find a course :) study
The problem is:
Each software have your ouw format.
like the software that converts txt in pdb, it converts only for a especific
software that runs in palm and can open that PDB. but others softwares will
cannot open that pdb.
In PALM devzone you have all description of a generic PDB,
//
BitmapType *bmpP;
WinHandle win;
Err error;
RectangleType onScreenRect;
bmpP = BmpCreate(100, 100, 8, NULL, error);
if (bmpP)
{
win = (bmpP, error);
if (win)
{
hello,
i'm a palm developer for a year now and i built some palm applications on
the palm device.
i'm now working on developing conduit and pc applications that come with a
palm device app in one pack.
i'm intersting to know what kind of application/s U, the palm user, need to
have on your
I just noticed that Constructor shows the item IDs which block the view of
the form and make Constructor unusable if you have many items in a form. Is
this new? Can this feature be turned off? Best regards, Paul
--
For information on using the Palm Developer Forums, or to unsubscribe, please
Hi there,
My name is Robert Gasparotto and I live in South Africa. I have been programming for
the Palm (Palm Vx and Palm III)for a few months. I have released some software to
www.PalmGear.com and have had good feedback except for some people who seem to be
running Palm OS 3.1. I cannot
From constructor: select 'Layout-Hide Object IDs'
- Original Message -
From: "Paul Nevai" [EMAIL PROTECTED]
To: "Palm Developer Forum" [EMAIL PROTECTED]
Sent: Tuesday, January 23, 2001 7:40 AM
Subject: Constructor shows ID numbers
I just noticed that Constructor shows the item IDs
From: [EMAIL PROTECTED] (Rick Kier)
snip
So, the question came up (thanks Danny) did we have to support
PalmOS 2.0? The answer is "We don't know."
Any ideas on either: how to determine "DB in rom" on PalmOS 2.0
or whether we should support PalmOS 2.0?
When I wrote my first app, I was
Hello Palm,
Do anybody know where I can get "c" or "c++" library of regular
expressions? The faster the better.
Any links or may be private e_mail with file attachement are
appreciated.
And if there is a site with a number of links to c++ or c sources?
Thanks a lot.
--
Best regards,
a) fill out the paper work, mail it in and wait to get access to the ROMs (I
hear this can take several weeks for international developers)
b) get your hands on an OS 3.1 device and download the ROM
- Original Message -
From: "Robert Gasparotto" [EMAIL PROTECTED]
To: "Palm Developer
When i try to implement the AbstractRecord class provided by cdk 4.0 for java
to create my own record type and try to compile my class it gives me the error
Superclass palm.conduit.AbstractRecord of class palm.conduit.simpleRecord not
found (simpleRecord is name of my class)
what should i do
Hi all.
I have some (maybe) advanced questions and hope that some one can answer
these questions.
Menu crashes / hangs my app after dynamically add / hide items from the
menubar 2nd time. it works first time but always hangs / crashes the system
on 2nd time (especially hiding...). I know I
Hello Palm,
Do anybody know where I can get "c" or "c++" library of regular
expressions? The faster the better.
Any links or may be private e_mail with file attachement are
appreciated.
And if there is a site with a number of links to c++ or c sources?
Try http://www.boost.org
--
--
From: Herman Badenhorst
Hi, i am doing development for the m100, but can get my emulator
to read the m100 rom file...
any reasons why?
Do you mean to say that you "can not get" the emulator to read the m100 ROM?
How old is your copy of POSE? I think you need version 3.0a7 or newer to
load
To my surprise, there is no API to copy a database or is there and I can
figure it out. Basically, I want to make a back up of my database on the
palm.
Thanks
Ralph Krausse
www.consiliumsoft.com
** Free Palm Source Code **
--
For information on using the Palm Developer Forums, or to
To my surprise, there is no API to copy a database or is there and I can
figure it out. Basically, I want to make a back up of my database on the
palm.
Set the backup attribute (dmHdrAttrBackup) and HotSync.
Easier: run it under POSE and export it.
Regards,
Steve Mann
--
Hello All,
I am trying to run my app on the POSE but I get the following error:
Could not install the PalmOS file "xxx.prc" because a duplicate 'tAIB'(1000)
resource was found.
Ok, from what I can tell, it seems that I may have a dupllicate resource. I
have check and triple checked my app but
How can I add a Calendar to a forms Date Field, so it is a popup calendar
that the user can use to select a date to fill in the field?
I am using Code Warrior Lite
Thanks in advance
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
You need to set dmHdrAttrBackup on your database.
This will ensure that it's backed up.
DmOpenDatabaseInfo(gUrlDB, theLocalID, NULL, NULL, theCardNum, NULL);
DmDatabaseInfo(theCardNum, theLocalID, NULL, theAttributes, NULL,
NULL, NULL, NULL, NULL, NULL,
To my surprise, there is no API to copy a database or is there and I can
figure it out. Basically, I want to make a back up of my database on the
palm.
sure.. you can write your own.. DmCreateDatabaseFromImage() or
manually create the database?
// az
[EMAIL PROTECTED]
Hi,
When I run gremlins this error happens on event 905,000. Prior to that event
Find.c was launched at least thousand of times
Without problem. I don't have any code related to Find application. What
could be wrong?
Thank you,
Vitaly
--
For information on using the Palm Developer Forums, or
for this given code the error is at
WinCreateBitmapWindow, Bitmap functions.
WinCreateBitmapWindow is a new function for PalmOS 3.5, and it prototype
only exists in the 3.5 and later SDKs.
The reason you're getting your strange error is because you don't have the
"Require Function
You cam find a program called jfile that convert pdb to cvs and others
format, and viceversa at this adress:
http://www.land-j.com/jfileu.html or maybe at http://www.palmr.com/ but its
in Spanish I think.
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
On Fri, 19 Jan 2001, Brian Mathis wrote:
OK, I've been searching the archives for about an hour looking for an
answer to this, and all I found were lots of questions, and no answers.
Could someone at least respond with a reference of where to look, if for
nothing else to provide an answer in
try this:
Boolean SelectDay (const SelectDayType selectDayBy, Int16 *month,
Int16 *day, Int16 *year, const Char *title)
On Tue, 23 Jan 2001 10:55:35 -0500, "Dean Rochester" [EMAIL PROTECTED]
wrote:
How can I add a Calendar to a forms Date Field, so it is a popup calendar
that the user can
Hi,
I was stopped by this question for 2 week now. Does anyone know how I can
patch TxtGetNextChar in Palm OS 3.5? Some code example will be highly
appreciated. Thanks in advance!
Yan
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
What do I add for the header file to build the Calendar object? In CW
constructor, when I add items to a form, they appear in the constructors
header file. What do I add for the calendar item?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Jeremy
Hi all
Some bugs that I found on MenuHideItem() function...
1.) Hiding 1st item on the menu will hang / crash the system
2.) Hiding dynamically created menu item, which create by MenuAddItem(),
will hang / crash the system.
I'm very very disppointed and desperated trying to fix above
Does anyone have sample code that talks with a modem
to do AT commands.
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
When I run gremlins this error happens on event 905,000. Prior to that event
Find.c was launched at least thousand of times
Without problem. I don't have any code related to Find application. What
could be wrong?
SysAppLaunch returned an error when Find tried to launch an application.
Are you
I don't.I am also interested
But FYI: you can get a dumb terminal for palm from
http://www.markspace.com/online.html if that helps.
-Original Message-
From: Anthony Randazzo [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 23, 2001 12:58 PM
To: Palm Developer Forum
Subject: Serial
[EMAIL PROTECTED] wrote in message news:36734@palm-dev-forum...
Apparently, I was using the same output filename and thus, the second PRC
to be installed overwrites the first.
It's actually the database name that matters, but if you don't specify a
database name, CodeWarrior (or rather the
Whoever changed the key bindings in the Visual Source Safe plugin so that
'C' that used to mean "Cancel" now means "Check Out"...just grr :)
Other than that, nice upgrade!
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
About the only solution I can think of that's truly portable is to write a
little app that adds an item to the datebook and deletes itself. This app
then serves as an "appointment object".
There are two parts to this app. First you have to add an item to the
datebook. This could be done using
Awwyou guys are tough to please :-)
-- jkl
- Original Message -
From: "Chris DiPierro" [EMAIL PROTECTED]
Newsgroups: palm-dev-forum
To: "Palm Developer Forum" [EMAIL PROTECTED]
Sent: Tuesday, January 23, 2001 12:50 PM
Subject: CW R7 good, but one nit pick
Whoever changed the key
Hi,
Does anyone have a java based (under Windows NT) implementation for
the IRObex protocol used by PALM to beam?
Thank you,
Andrei
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
"Dean Rochester" [EMAIL PROTECTED] wrote in message
news:36805@palm-dev-forum...
What do I add for the header file to build the Calendar object? In CW
constructor, when I add items to a form, they appear in the constructors
header file. What do I add for the calendar item?
Use a Selector
On Wed, Jan 24, 2001 at 05:57:59PM -0500, [EMAIL PROTECTED] wrote:
Hi Friends
Anyone knows how to turn off a novatel minstrel modem, programatically from
Codewarrior
i'm working with a workpad 3.0 and the Minstrel modem.
ATH4 should work, but you might also need to send an escape
Hello,
What causes chunk under lock error to occur?
Thanks
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
How can I say "This application can't be move to Memory Card."
or how user know " Is this application movable or not?"
There's not a very good way to do this, unfortunately. A couple of ideas:
If you set the 'copy protection' bit on your app, the user won't be able to copy
it to the card
Your app can easily detect when it is being run from a card (by checking
for the new launchcode), and can warn the user that some features might
not work correctly, and they should copy your app to main memory.
correct me if i am wrong.. but *way* back when i was briefed about
palmos 4.0
On Mon, Jan 22, 2001 at 09:52:49AM -0800, Jeremy Evans wrote:
I have a file stream db that I would like to beam in it's raw format
to a non palm device.
Any pointers on the best way to use this?
It would be run on Palm OS 3.1 or higher.
If the far end supports IrOBEX, you can use the
When you try to unlock a handle that is not locked.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
Nesselhauf, John
Sent: Wednesday, January 24, 2001 8:20 AM
To: Palm Developer Forum
Subject: Chunk under lock
Hello,
What causes chunk under lock error
I've been using Constructor to assemble my UI, but have run into problems
(empty resources) when backing up the file onto a remote server. I've been
able to run the following command in MPW:
DeRez myGUI.rsrc PalmTypes.r
To produce *.r (Rez) file which is great for cross platform development and
Don't hide the menu item, just beep when they try to use it?
-Original Message-
From: E.L. [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, January 23, 2001 9:48 AM
To: Palm Developer Forum
Subject: MenuHideItem issues. Really really bad
Hi all
Some bugs that I found on
There is a subtle point not mentioned in the official palm documentation
on the format of the PRB/PRC header that I wanted to mention so no one
else made my mistake.
The documentation at great length explains that in a PRB/PRC, if you
have NO RECORDS, then you must add 16-bits of padding after
I've actually found that as a general rule, the "Pascal array" form actually works out
muc, much easier for many programming
situations, even if you do have to pass around a length. For one thing, any function
which normally operates on a string would also
work on an arbitrary string segment.
There are a LOT of really cheap IIIe's and IIIx's out there - even recently, they sold
by the ton. :)
Although they have 3.1, they can't all be upgraded upgraded to 3.3 ?
Has anyone confirmed that one of these guys upgraded to 3.3 recognizes 16-shade mode?
Alan Ingleby wrote:
Try writing to
Our solution does pretty much the same thing, and, therefore, is equally as
horrible.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Brian
Mathis
Sent: Tuesday, January 23, 2001 9:01 AM
To: Palm Developer Forum
Subject: Re: Adding a service to network
Slight problem - I have a popup trigger on top of a bitmap (essentially on a
"clear" part where there is no actual graphic) - the problem I am having is
when I change the text display of the popup trigger using CtlSetLabel() part
of the bitmap gets erased. The part that gets overwritten is
Good point - I heard the base visors weren't OS upgradable.
I think OS 3.5 is somewhat an orphan when it comes to the masses:
By the time you can safely discard OS 3.1 as being not-in-service, everyone will want
OS 4.x and ARM compliance. :)
Aaron Ardiri wrote:
Try writing to the DB.
Any tips on getting "export" to work?
When I try it, the emulator starts to export and then just hangs.
Steve Mann wrote:
To my surprise, there is no API to copy a database or is there and I can
figure it out. Basically, I want to make a back up of my database on the
palm.
Set the
Hello Evevrybody,
I have a question, Could you help me please.
What do I need to synchronize data using Serial Port and Hotsynch. (to
level hardware).
There will be a lot users that will synchronize simultaneously.
Thanks,
Marco
--
For information on using the Palm Developer Forums,
Actually, one other thing. Both the "View" and "VCS" menus in the IDE use
alt-v as their shortcut. Can you change VCS's hotkey?
Jun-Kiat Lam [EMAIL PROTECTED] wrote in message
news:36821@palm-dev-forum...
Awwyou guys are tough to please :-)
-- jkl
--
For information on using the
Yes, I think so. Go to Edit-Commands and Key Bindings, and you can set the
keyboard shortcuts to the menus there.
-- jkl
- Original Message -
From: "Chris DiPierro" [EMAIL PROTECTED]
Newsgroups: palm-dev-forum
To: "Palm Developer Forum" [EMAIL PROTECTED]
Sent: Tuesday, January 23, 2001
There are a LOT of really cheap IIIe's and IIIx's out there - even
recently, they sold by the ton. :)
Although they have 3.1, they can't all be upgraded upgraded to 3.3 ?
IIIe's don't have Flash so they can't be upgraded.
--
For information on using the Palm Developer Forums, or to
There will be a lot users that will synchronize simultaneously.
Have you looked at Palm Hotsync Server?
- Original Message -
From: [EMAIL PROTECTED]
To: "Palm Developer Forum" [EMAIL PROTECTED]
Sent: Tuesday, January 23, 2001 3:12 PM
Subject: Infrastructure
Hello Evevrybody,
I have
Hi,
Can some body help me please.The situation is
My application is a multisegment app with two segments. I want to add a
static library file(.lib) to my project. The .lib file when i add to my
project in the first segment it works fine. but When i move the .lib file to
the 2nd segment it just
"DIAMOND JEFF" [EMAIL PROTECTED] wrote in message
news:36838@palm-dev-forum...
There are a LOT of really cheap IIIe's and IIIx's out there - even
recently, they sold by the ton. :)
Although they have 3.1, they can't all be upgraded upgraded to 3.3 ?
Has anyone confirmed that one of these
Unfortunately "VCS" doesn't appear there, so I guess I have to change View
instead. Oh well, no big deal.
Jun-Kiat Lam [EMAIL PROTECTED] wrote in message
news:36852@palm-dev-forum...
Yes, I think so. Go to Edit-Commands and Key Bindings, and you can set
the
keyboard shortcuts to the menus
Ugh, actually I take it back, you can't change the menus themselves, just
what's in them.
The name of the view menu is listed as: View which if I remember my Win
programming correctly means the V is the hotkey cause it follows the ...
but it's a grayed out field, so it can't be changed...
"Chris DiPierro" [EMAIL PROTECTED] wrote in message
news:36860@palm-dev-forum...
Unfortunately "VCS" doesn't appear there, so I guess I have to change View
instead. Oh well, no big deal.
You can switch back to the Macintosh menu scheme -- that doesn't separate
out View and Windows so there's
That should do it.
Regards,
Alan Ingleby
"Rick Kier" [EMAIL PROTECTED] wrote in message
news:36754@palm-dev-forum...
"Alan Ingleby" [EMAIL PROTECTED] wrote in
36743@palm-dev-forum:
Try writing to the DB. Won't that tell you?
Actually, we are scanning all of the DBs. Maybe we could
Ah cool, thanks.
Ben Combee [EMAIL PROTECTED] wrote in message
news:36862@palm-dev-forum...
"Chris DiPierro" [EMAIL PROTECTED] wrote in message
news:36860@palm-dev-forum...
Unfortunately "VCS" doesn't appear there, so I guess I have to change
View
instead. Oh well, no big deal.
You
-BEGIN PGP SIGNED MESSAGE-
Ender Wiggin wrote:
How can I create a database that I can include in my app for "initial
settings"? I've heard the terms "Image Database" and "Resource Database"
are these involved?
--
Thanks in advance
--
Nikue Harlley
Veni Vidi Vici
I have an app where a user will be entering text into a field, and i want
them to be able to do a certain keystroke and have the focus go to the next
field. I am sure this has been done, but I can find nothing on it..
Anyone have some sample code, ideas, or somewhere to look?
Thanks!
Jason
At 3:23 PM -0800 1/23/01, Jason Feinberg wrote:
I have an app where a user will be entering text into a field, and i want
them to be able to do a certain keystroke and have the focus go to the next
field. I am sure this has been done, but I can find nothing on it..
There's a standard keystroke
I have to populate a popup trigger. Can any body help me how I can do it?
Any help will be highly appreciated.
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
Awesome, that's exactly what I needed to get started. Appreciate it!
Jason
"Dave Johnson" [EMAIL PROTECTED] wrote in message
news:36866@palm-dev-forum...
case keyDownEvent:
if( eventP-data.keyDown.chr == vchrNextField ||
eventP-data.keyDown.chr == vchrPrevField ||
eventP-data.keyDown.chr
-BEGIN PGP SIGNED MESSAGE-
McCollister, Mike wrote:
Brian,
If X-Master did not have sets then I would agree with you and have
Andreas make it a Palm Preference application. However, since the sets
are available at the upper right of the screen then it complicates the
UI a
I've noticed an odd phenomenon,and I'm wondering if anyone on this forum can
shed any light on it:
Often, our associated databases will be deleted by the PalmOS on the
recipient Palm when a copy of our app is beamed. Why is this happening?
Even more perplexing is that it doesn't happen every
I've only seen this happen on old versions of the OS - perhaps pre-OS3.3?
In any case, on those systems, it's a feature, not a bug (and it happened
every time).
Mark Peters
in article 36870@palm-dev-forum, Wayne Johnson at
[EMAIL PROTECTED] wrote on 1/23/01 5:00 PM:
I've noticed an odd
Does anybody have an opinion on whether it's worth it for Mac users? Is
there even a Mac version of the upgrade?
Mark Peters
in article 36699@palm-dev-forum, Steve Achelis at [EMAIL PROTECTED] wrote on
1/22/01 1:40 PM:
I agree with Jeff. My review wouldn't be as glowing, but it was a
"Alan Ingleby" [EMAIL PROTECTED] wrote in
36863@palm-dev-forum:
That should do it.
Regards,
Alan Ingleby
Alan and everyone,
Thanks for the info.
This is what we did:
Scan of all of the DB's.
If all of them are in RAM, there must be a problem with the heap flags.
We used the
At 05:00 PM 1/23/2001, Wayne Johnson wrote:
Often, our associated databases will be deleted by the PalmOS on the
recipient Palm when a copy of our app is beamed. Why is this happening?
Even more perplexing is that it doesn't happen every time!
It's been a long time, but if I recall, it depends
Try http://www.uol.com.br/palmsys/Programacao/Programacao.htm
There we can find a lot o ROMs to download
Ricardo
- Original Message -
From: "Dave Lippincott" [EMAIL PROTECTED]
To: "Palm Developer Forum" [EMAIL PROTECTED]
Sent: Tuesday, January 23, 2001 12:18 PM
Subject: Re: Palm OS 3.1
Hi,
Is it efficient to allocate a lot of small records from a database? We
need to allocate a bunch of stuff at the beginning of a program
dynamically and the dynamic heap is already used up. We don't do a lot
of memory modification.
Each record overhead is 20~24 bytes, right?
Please let me
At 5:11 PM -0800 1/23/01, Mark A. Peters wrote:
Does anybody have an opinion on whether it's worth it for Mac users? Is
there even a Mac version of the upgrade?
Yes, there's a Mac version, and yes, IMHO it's well worth it (but you
should know that in general I ALWAYS want to upgrade my tools to
Sorry this is off topic a bit. Does anyone know how to search any of the
egroups archives, including palm-dev-forum?
Thanx.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Tom
Zerucha
Sent: Tuesday, January 23, 2001 11:06 AM
To: Palm Developer Forum
It's been a long time, but if I recall, it depends on whether you're
running the launcher on the receiving device when the beam is received.
This bug can cause data loss, and is therefore quite serious.
--
Peter Epstein
Palm Inc. Developer
Jesse PROMISED me at last year's PalmSource (1999)
David Fedor wrote:
Thanks very much for the clarification questions - they're great ones, and
I'll have to admit I'm not sure of the absolutely precise answers when we
get into fine detail like this. I could make educated guesses but I'll
forward your note to our lawyers and get an official
From: george williams
Sorry this is off topic a bit. Does anyone know how to search any of the
egroups archives, including palm-dev-forum?
1. Go to http://www.egroups.com/list/palm-dev-forum/info.html for the
palm-dev archive.
2. Click on one of the underlined numbers beneath the text
"Steve" [EMAIL PROTECTED] wrote in message news:36879@palm-dev-forum...
Jesse PROMISED me at last year's PalmSource (1999) that this would be
fixed in 3.5? Isn't it? How about 4.0??
I reported this one on Palm OS 3.0. :)
My digging through the sources indicate:
Palm OS 1.0 - no beaming
There is a field in the header of the pdf files that alow you to backup a
file. Then the pdf file will appear in the "backup" directory when you
sincronized your palm.
Saludos!
ICQ: 74843766
-Mensaje original-
De: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]En nombre de Ralph
Krausse
I would second your opinion about the upgrade for Mac users.
Personally, I find the new Find dialogs annoying and totally
un-intuitive, but hey, it's a small thing.
The only annoying thing I've found so far is that when starting a
debug session with POSE,
there's this little dialog that comes
I have a code with the operator +\. Does anybody know what it is for? Here,
Its the code, maybe can help us.
// CH.5 Constants that define the database record
#define DB_ID_START 0
#define DB_ID_SIZE (sizeof( ULong ))
#define
The backslash character is a way of extending the definition of a macro across
multiple lines of source code.
--
Peter Epstein
Palm Inc. Developer
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
From: Marcelo
I have a code with the operator +\. Does anybody know what it is
for? Here,
It's the code, maybe can help us.
#define DB_DATE_TIME_START(DB_ID_START +\
DB_ID_SIZE)
This a really a basic C question, not
-BEGIN PGP SIGNED MESSAGE-
Rick Kier wrote:
[...]
Any ideas on either: how to determine "DB in rom" on PalmOS 2.0 or
whether we should support PalmOS 2.0?
TeamSTARS
Dick Gordon and Rick Kier
Answers only bring more questions.
The answer is: what is your target audience? If
I have a popup trigger on top of a bitmap (essentially on a
"clear" part where there is no actual graphic) - the problem I am having
is
when I change the text display of the popup trigger using CtlSetLabel()
part
of the bitmap gets erased.
if popup trigger is on top of *clear* part of bitmap
Redraw the bitmap when you change the text. Simple...?
Regards,
Alan Ingleby
Systems Developer
ProfitLink Consulting Pty Ltd
309 Burwood Road
Hawthorn
Victoria 3122
"Anuradha J" [EMAIL PROTECTED] wrote in message
news:36892@palm-dev-forum...
I have a popup trigger on top of a bitmap
Hello:
I have been using this CodeWarrior 4.0.1 and
"Constructor for PalmOS 1.2 ". When I create a new
project using 'PalmOs 3.1/ VII stationary' my
'starter.c' includes this Pilot.h.
If I want to include PalmOS.h and all these new
headers, how do I set the path. I am getting wrong in
my
Hi friends,
Is it any way to find the palmos version working.
Any commands there?
Sreek
__
Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at great prices.
http://auctions.yahoo.com/
--
For information on using the Palm Developer
1 - 100 of 109 matches
Mail list logo