RE: Accessible FM transmitters
Well, if the beer's good, I'm off the New Zealand, smile. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jonathan Mosen Sent: Thursday, September 13, 2007 1:57 AM To: 'PC Audio Discussion List' Subject: RE: Accessible FM transmitters Hi Albert, it varies quite a lot depending on terrain, adjacent channels etc. With the right combination you can cover 10 KM pretty well. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of albert griffith Sent: Friday, 14 September 2007 1:20 a.m. To: 'PC Audio Discussion List' Subject: RE: Accessible FM transmitters approximately, how far does one watt take your signal? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jonathan Mosen Sent: Thursday, September 13, 2007 12:02 AM To: 'PC Audio Discussion List' Subject: RE: Accessible FM transmitters Hmmm, I'm glad to be living in new Zealand, land of the free. smile. Here anyone is entitled to set up a low power FM station with a maximum power of 1 watt, within two defined areas of spectrum. You don't have to apply for any license, just set up and go. The Radio Spectrum management group reserve the right to come and inspect your installation at any time and there are fines if you're over power. You also are required to do a station identification that provides contact details a minimum of every three hours. But that's it. Simple. And you'll find some of the best radio out there on those frequencies. Lots of niche and community broadcasters. Jonathan Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: Accessible FM transmitters
Jonathan, When you talk about power output. In the New Zealand regulations do they refer to rf output power or affective radiated power. Output being power out of the transmitter itself and affective radiated power being output taking into account antenna, height, feed line loss, and height above average terrain. Are there any regulations regarding antenna height or antenna gain? Dave Marthouse [EMAIL PROTECTED] - Original Message - From: Jonathan Mosen [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 1:57 AM Subject: RE: Accessible FM transmitters Hi Albert, it varies quite a lot depending on terrain, adjacent channels etc. With the right combination you can cover 10 KM pretty well. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of albert griffith Sent: Friday, 14 September 2007 1:20 a.m. To: 'PC Audio Discussion List' Subject: RE: Accessible FM transmitters approximately, how far does one watt take your signal? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jonathan Mosen Sent: Thursday, September 13, 2007 12:02 AM To: 'PC Audio Discussion List' Subject: RE: Accessible FM transmitters Hmmm, I'm glad to be living in new Zealand, land of the free. smile. Here anyone is entitled to set up a low power FM station with a maximum power of 1 watt, within two defined areas of spectrum. You don't have to apply for any license, just set up and go. The Radio Spectrum management group reserve the right to come and inspect your installation at any time and there are fines if you're over power. You also are required to do a station identification that provides contact details a minimum of every three hours. But that's it. Simple. And you'll find some of the best radio out there on those frequencies. Lots of niche and community broadcasters. Jonathan Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.485 / Virus Database: 269.13.15/1002 - Release Date: 9/11/2007 5:46 PM Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
RE: Accessible FM transmitters
Hi Dave, it's been a while since I was involved in this but I believe it is ERP. The only restriction I can recall is that they have limits on the number of transmitters you can have for the one station, to prevent people from using these frequencies to do networking on the cheap. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Marthouse Sent: Thursday, 13 September 2007 7:23 p.m. To: PC Audio Discussion List Subject: Re: Accessible FM transmitters Jonathan, When you talk about power output. In the New Zealand regulations do they refer to rf output power or affective radiated power. Output being power out of the transmitter itself and affective radiated power being output taking into account antenna, height, feed line loss, and height above average terrain. Are there any regulations regarding antenna height or antenna gain? Dave Marthouse [EMAIL PROTECTED] - Original Message - From: Jonathan Mosen [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 1:57 AM Subject: RE: Accessible FM transmitters Hi Albert, it varies quite a lot depending on terrain, adjacent channels etc. With the right combination you can cover 10 KM pretty well. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of albert griffith Sent: Friday, 14 September 2007 1:20 a.m. To: 'PC Audio Discussion List' Subject: RE: Accessible FM transmitters approximately, how far does one watt take your signal? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jonathan Mosen Sent: Thursday, September 13, 2007 12:02 AM To: 'PC Audio Discussion List' Subject: RE: Accessible FM transmitters Hmmm, I'm glad to be living in new Zealand, land of the free. smile. Here anyone is entitled to set up a low power FM station with a maximum power of 1 watt, within two defined areas of spectrum. You don't have to apply for any license, just set up and go. The Radio Spectrum management group reserve the right to come and inspect your installation at any time and there are fines if you're over power. You also are required to do a station identification that provides contact details a minimum of every three hours. But that's it. Simple. And you'll find some of the best radio out there on those frequencies. Lots of niche and community broadcasters. Jonathan Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.485 / Virus Database: 269.13.15/1002 - Release Date: 9/11/2007 5:46 PM Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
RE: Accessible FM transmitters
The beer is utterly brilliant. And if you Google, maybe you will find wave files of someone opening a few choice cans and bottles. Just put that in there to stay on topic. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of albert griffith Sent: Friday, 14 September 2007 2:38 a.m. To: 'PC Audio Discussion List' Subject: RE: Accessible FM transmitters Well, if the beer's good, I'm off the New Zealand, smile. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jonathan Mosen Sent: Thursday, September 13, 2007 1:57 AM To: 'PC Audio Discussion List' Subject: RE: Accessible FM transmitters Hi Albert, it varies quite a lot depending on terrain, adjacent channels etc. With the right combination you can cover 10 KM pretty well. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of albert griffith Sent: Friday, 14 September 2007 1:20 a.m. To: 'PC Audio Discussion List' Subject: RE: Accessible FM transmitters approximately, how far does one watt take your signal? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jonathan Mosen Sent: Thursday, September 13, 2007 12:02 AM To: 'PC Audio Discussion List' Subject: RE: Accessible FM transmitters Hmmm, I'm glad to be living in new Zealand, land of the free. smile. Here anyone is entitled to set up a low power FM station with a maximum power of 1 watt, within two defined areas of spectrum. You don't have to apply for any license, just set up and go. The Radio Spectrum management group reserve the right to come and inspect your installation at any time and there are fines if you're over power. You also are required to do a station identification that provides contact details a minimum of every three hours. But that's it. Simple. And you'll find some of the best radio out there on those frequencies. Lots of niche and community broadcasters. Jonathan Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: software for copying dvds with nero 7
hi casey, yes you can use dvd shrink and nero. just place the dvd in your drive and open dvd shrink. befor you can start the process you need to tell dvd shrink to use nero. open dvd shrink and go to the edit menu in the edit menu will find the preference click on that and shift tab once and then ctrl tab to the file/iso item and tab to use nero. then close and go to the process of a disk. dvd shrink will tell you automatically when to place a blank dsik in to the drive to copy it. hth anthony copying - Original Message - From: Casey [EMAIL PROTECTED] To: PC Audio Pc-audio@pc-audio.org Sent: Saturday, September 08, 2007 5:03 PM Subject: software for copying dvds with nero 7 Hi I am wanting to know what all software I will need along with nero seven for copying copyright protected DVD like movies and TV shows and things like that. How much will the software cots me and where can I order it from and can I order what I will need form one place and get it as a package or do I have to go threw a couple of different places to get what I am needing for this? I have heard about DVD shrink so can I use this for this purpose and if so what else would I need to go along with that. Thanks for any help that I may get on this and I will look forward to what might come on the list about this. Casey Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] __ NOD32 2527 (20070913) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: Accessible FM transmitters
Well, you guys probably don't have an NPR who wants all the freqs for all their translators and therefore is very much against LP FM. - Original Message - From: Jonathan Mosen [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 12:01 AM Subject: RE: Accessible FM transmitters Hmmm, I'm glad to be living in new Zealand, land of the free. smile. Here anyone is entitled to set up a low power FM station with a maximum power of 1 watt, within two defined areas of spectrum. You don't have to apply for any license, just set up and go. The Radio Spectrum management group reserve the right to come and inspect your installation at any time and there are fines if you're over power. You also are required to do a station identification that provides contact details a minimum of every three hours. But that's it. Simple. And you'll find some of the best radio out there on those frequencies. Lots of niche and community broadcasters. Jonathan Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] __ NOD32 2527 (20070913) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
RE: Accessible FM transmitters
Hi all, I'm hoping for a good one that's around the $75 to $100 range. Thanks, Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matthew2007 Sent: Thursday, September 13, 2007 12:07 AM To: PC Audio Discussion List Subject: Re: Accessible FM transmitters Yeah, but you work in the land of opportunities here in the USA. (Big fat Smile) Matthew Original Message - From: Jonathan Mosen [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Wednesday, September 12, 2007 9:01 PM Subject: RE: Accessible FM transmitters Hmmm, I'm glad to be living in new Zealand, land of the free. smile. Here anyone is entitled to set up a low power FM station with a maximum power of 1 watt, within two defined areas of spectrum. You don't have to apply for any license, just set up and go. The Radio Spectrum management group reserve the right to come and inspect your installation at any time and there are fines if you're over power. You also are required to do a station identification that provides contact details a minimum of every three hours. But that's it. Simple. And you'll find some of the best radio out there on those frequencies. Lots of niche and community broadcasters. Jonathan Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] __ NOD32 2526 (20070912) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.485 / Virus Database: 269.13.15/1003 - Release Date: 9/12/2007 10:56 AM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.485 / Virus Database: 269.13.15/1003 - Release Date: 9/12/2007 10:56 AM Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: Accessible FM transmitters
ReRemember something else about New Zealand: because of its geographic location and relative isolation from other land areas: the radio spectrum is going to be far less cluttered than in North America or Western Europe. Hence, the government can be far more lenient and liberal in allowing use of the spectrum. Just imagine, for instance, what would occur in the Midwest or Northeast USA if suddenly FCC regs changed and allowed more or less unregulated low-power fm use. It might work well in Wyoming or Montana or Manitoba; but it would hardly play well in Chicago, Boston or Toronto. The fm band would become like the old cb band with constant interference, hash, and noise; and that would serve no one's interest. For those who wish playing with their own radio stations, the net would seem a far better venue. Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: Accessible FM transmitters
Sign me up as well to go to New Zealand the land of free play radio!!! Well that little transmitter that I recommended will indeed do the job, as you can push the envelope a little with a good well tuned external antenna and still stay within limits, and the radio police won't come after you. As I said in a previous post this is the closest thing to a commercial broadcast transmitter. As this guy builds most of his stuff from scratch he can do just about anything to make it accessible, and from what I have been able to gather from previous posts to this list he has done just that. . Original Message - From: Chuck Adkins [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 5:15 AM Subject: Re: Accessible FM transmitters Well, you guys probably don't have an NPR who wants all the freqs for all their translators and therefore is very much against LP FM. - Original Message - From: Jonathan Mosen [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 12:01 AM Subject: RE: Accessible FM transmitters Hmmm, I'm glad to be living in new Zealand, land of the free. smile. Here anyone is entitled to set up a low power FM station with a maximum power of 1 watt, within two defined areas of spectrum. You don't have to apply for any license, just set up and go. The Radio Spectrum management group reserve the right to come and inspect your installation at any time and there are fines if you're over power. You also are required to do a station identification that provides contact details a minimum of every three hours. But that's it. Simple. And you'll find some of the best radio out there on those frequencies. Lots of niche and community broadcasters. Jonathan Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] __ NOD32 2527 (20070913) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.487 / Virus Database: 269.13.16/1005 - Release Date: 13/09/2007 11:45 AM Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
RE: Accessible FM transmitters
We do have a kind of NPR equivalent, but it is fully Government funded and I think is a bit more like the BBC, CBC, or Australia's ABC. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chuck Adkins Sent: Thursday, 13 September 2007 9:15 p.m. To: PC Audio Discussion List Subject: Re: Accessible FM transmitters Well, you guys probably don't have an NPR who wants all the freqs for all their translators and therefore is very much against LP FM. - Original Message - From: Jonathan Mosen [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 12:01 AM Subject: RE: Accessible FM transmitters Hmmm, I'm glad to be living in new Zealand, land of the free. smile. Here anyone is entitled to set up a low power FM station with a maximum power of 1 watt, within two defined areas of spectrum. You don't have to apply for any license, just set up and go. The Radio Spectrum management group reserve the right to come and inspect your installation at any time and there are fines if you're over power. You also are required to do a station identification that provides contact details a minimum of every three hours. But that's it. Simple. And you'll find some of the best radio out there on those frequencies. Lots of niche and community broadcasters. Jonathan Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] __ NOD32 2527 (20070913) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re[2]: Accessible FM transmitters
Jonathan that's wonderful but here the FCC is money hungry. I've always wished that there were low powered stations here but where are you going to put them in the major cities like Sacramento, ca where I live. Years ago when I lived in The Boston Area of New England we heard several low powered stations on AM at like 610 or 620 which now the foolish FCC has sold to commercial stations. These stations would broadcast just for a couple of hours around midnight and they were basically in New York and I could hear them fairly well. Sure I heard Language that is not necessarily clean but it still was fun to listen. Back in the 80s I was living in San Francisco and there was a feller named Steve Dunifer and he was running a low powered station out of Berkeley which is the East Bay in that area. I know he fought with the FCC on more than one ocassion. He may still be on the air. I don't know if he's broadcasting on the net but he called his station Radio Free Berkeley. *** REPLY SEPARATOR *** On 9/13/2007 at 4:01 PM Jonathan Mosen wrote: Hmmm, I'm glad to be living in new Zealand, land of the free. smile. Here anyone is entitled to set up a low power FM station with a maximum power of 1 watt, within two defined areas of spectrum. You don't have to apply for any license, just set up and go. The Radio Spectrum management group reserve the right to come and inspect your installation at any time and there are fines if you're over power. You also are required to do a station identification that provides contact details a minimum of every three hours. But that's it. Simple. And you'll find some of the best radio out there on those frequencies. Lots of niche and community broadcasters. Jonathan Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] djc's Jukebox: http://paulmerrell.net:9212 or http://paulmerrell.net:9660 Saturday Evenings 9 to midnight Eastern. My Journal http://livejournal.com/users/djc1 email Or Msn: [EMAIL PROTECTED] I C Q Number Is: 4781694 Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: sf9 and the arrows.
where can i get the sound forge tutorial? - Original Message - From: Curtis Delzer [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Tuesday, September 11, 2007 11:13 PM Subject: sf9 and the arrows. Hi Jonathan. I heard in your forging ahead tutorial, you lauded the fact that the arrows in sound forge 4.5, and at the time 5.0 also move you forward and backward while the file is playing. In later versions, the q (loop playback function had to be turned on for it to work, but it did until sf9 on my computer. I mean, simple, right? Why did Sony disable such a feature? I've been using the right/left arrows as changed by the zoom ratio for 5 years since I bought sf5 (when there was a $99 sale for it) and for some reason, my sf9 will not move the spot where the file is playing audibly any more. Like winamp, right left arrow moves the place where the file is playing, like Studio Recorder, why not, any more, Sound Forge? Page up, page down also moved the cursor larger amounts with the larger zoom ratios just as right left arrow did, but you know all this, my question is does it work on your computer, or not? If it does, then there is something definitely wrong with either (1) my configuration or (2) my download was corrupted when I got version 9.0C of the software. Thanks! :) Curtis Delzer - Original Message - From: GianniP46 [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Tuesday, September 11, 2007 7:07 PM Subject: Re: Recording in Vista like navigating the record dialog? - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Tuesday, September 11, 2007 3:07 PM Subject: RE: Recording in Vista Well, that's quite a broad question. For me, it works quite well for basic editing, applying of affects etc, using the keyboard functions. But if you have any specific tasks in mind I can try to be more specific. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of GianniP46 Sent: Tuesday, 11 September 2007 2:12 p.m. To: PC Audio Discussion List Subject: Re: Recording in Vista Jonathan, As the Jaws Guru, can you please give us some tips on using SF with Jaws without script support - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Monday, September 10, 2007 1:23 AM Subject: RE: Recording in Vista Hi, I'm using version 9 without any scripts. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of GianniP46 Sent: Monday, 10 September 2007 2:02 p.m. To: PC Audio Discussion List Subject: Re: Recording in Vista Hi Jonathan, What Version of Sound Forge with what scripts are you using? - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Sunday, September 09, 2007 9:31 PM Subject: RE: Recording in Vista Hi Samuel, this is absolutely not the case. I use Sound Forge and Studio Recorder to record all kinds of things in Windows Vista, and they work very well. Some sound card drivers are apparently better than others, but you get that with new operating systems until things sort themselves out. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Samuel Wilkins Sent: Saturday, 8 September 2007 8:12 a.m. To: pc-audio@pc-audio.org Subject: Recording in Vista Hello, I believe you can't record in Vista without the Freecorder toolbar. Could you please send the article that was posted on the list to me? I was also wondering if the creative soundcards will record with What you Hear in Goldwave in Vista. Thanks. Samuel Wilkins Email [EMAIL PROTECTED] Skype Cleverclogs6953 MSN Instant Messenger [EMAIL PROTECTED] A O L Instant Messenger Samuel4851 Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.485 / Virus Database: 269.13.12/997 - Release Date: 9/9/2007 10:17 AM Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] -- No virus
edirol question
Hi, When you change batteries on the r-09, does it keep your settings? Does it send you automatically into a menu to set the clock and date? Any answer would be appreciated. Judy Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Appending on the Olympus recorders
Hi List: Can you append to the end of a recording on the Olympus DS50 and the WS320M? Thank you all very much in advance Wayne Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: Appending on the Olympus recorders
No you can not append. Rick -- Visit my webpage and podcast feed at: http://www.blind-geek-zone.net and my web Blog at: http://blind-geek-zone.blogspot.com/ Join the BGZ mailing list by sending a blank email message to: [EMAIL PROTECTED] and put subscribe in the subject line. - Original Message - From: Whitefang [EMAIL PROTECTED] To: PC audio list. Pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 3:25 PM Subject: Appending on the Olympus recorders Hi List: Can you append to the end of a recording on the Olympus DS50 and the WS320M? Thank you all very much in advance Wayne Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: edirol question
hi judy on moine it appears to keep your settings. chris - Original Message - From: Judy W [EMAIL PROTECTED] To: PC audio discussion list. Pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 3:17 PM Subject: edirol question Hi, When you change batteries on the r-09, does it keep your settings? Does it send you automatically into a menu to set the clock and date? Any answer would be appreciated. Judy Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
RE: Re[2]: Accessible FM transmitters
There's a pirate radio movement and they're advocating for these low power stations. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of djc Sent: Thursday, September 13, 2007 11:10 AM To: pc-audio@pc-audio.org Subject: Re[2]: Accessible FM transmitters Jonathan that's wonderful but here the FCC is money hungry. I've always wished that there were low powered stations here but where are you going to put them in the major cities like Sacramento, ca where I live. Years ago when I lived in The Boston Area of New England we heard several low powered stations on AM at like 610 or 620 which now the foolish FCC has sold to commercial stations. These stations would broadcast just for a couple of hours around midnight and they were basically in New York and I could hear them fairly well. Sure I heard Language that is not necessarily clean but it still was fun to listen. Back in the 80s I was living in San Francisco and there was a feller named Steve Dunifer and he was running a low powered station out of Berkeley which is the East Bay in that area. I know he fought with the FCC on more than one ocassion. He may still be on the air. I don't know if he's broadcasting on the net but he called his station Radio Free Berkeley. *** REPLY SEPARATOR *** On 9/13/2007 at 4:01 PM Jonathan Mosen wrote: Hmmm, I'm glad to be living in new Zealand, land of the free. smile. Here anyone is entitled to set up a low power FM station with a maximum power of 1 watt, within two defined areas of spectrum. You don't have to apply for any license, just set up and go. The Radio Spectrum management group reserve the right to come and inspect your installation at any time and there are fines if you're over power. You also are required to do a station identification that provides contact details a minimum of every three hours. But that's it. Simple. And you'll find some of the best radio out there on those frequencies. Lots of niche and community broadcasters. Jonathan Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] djc's Jukebox: http://paulmerrell.net:9212 or http://paulmerrell.net:9660 Saturday Evenings 9 to midnight Eastern. My Journal http://livejournal.com/users/djc1 email Or Msn: [EMAIL PROTECTED] I C Q Number Is: 4781694 Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Delta soundcard problem.
Hi Folks: I have installed a Delta 1010 LT on my computer which already has a Delta 66 soundcard. Both cards are functional as far as Windows is concerned; however, the DeltaPannel software only recognizes the 1010 card. Is there something that I need to configure in order to be able to use the DeltaPanel software to manage both cards? Thanks gang. Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Good digital recorder for recording confreences and lectures
Hello. I have listened to many of the podcasts about digital recorders. I would like a small one for recording conferences and lectures. I would love the ease of use of the Olympus Ds-50, and don't need more space than it is limited to, but want to get the best quality I can. My frames of reference are cassette-recorder built-in mics and the build-in mic on the PtR2, which is terrible. If I were to spend under US $300, 1. Does the Ds-50 do a good job in conference situations, better than the two benchmarks I've mentioned? 2. How does your recorder, whichever you use, do in lecture or conference situations? I appreciate nay input. Thanks. Dean Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: sf9 and the arrows.
You will have to explore the Freedom Scientific site. I don't know if it is still there, but they sold it a few years ago, when SF4.5 and just before 5 was released. I think that was 2001? Not much later than that. Curtis Delzer - Original Message - From: Kenneth Suratt [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 1:42 PM Subject: Re: sf9 and the arrows. where can i get the sound forge tutorial? - Original Message - From: Curtis Delzer [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Tuesday, September 11, 2007 11:13 PM Subject: sf9 and the arrows. Hi Jonathan. I heard in your forging ahead tutorial, you lauded the fact that the arrows in sound forge 4.5, and at the time 5.0 also move you forward and backward while the file is playing. In later versions, the q (loop playback function had to be turned on for it to work, but it did until sf9 on my computer. I mean, simple, right? Why did Sony disable such a feature? I've been using the right/left arrows as changed by the zoom ratio for 5 years since I bought sf5 (when there was a $99 sale for it) and for some reason, my sf9 will not move the spot where the file is playing audibly any more. Like winamp, right left arrow moves the place where the file is playing, like Studio Recorder, why not, any more, Sound Forge? Page up, page down also moved the cursor larger amounts with the larger zoom ratios just as right left arrow did, but you know all this, my question is does it work on your computer, or not? If it does, then there is something definitely wrong with either (1) my configuration or (2) my download was corrupted when I got version 9.0C of the software. Thanks! :) Curtis Delzer - Original Message - From: GianniP46 [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Tuesday, September 11, 2007 7:07 PM Subject: Re: Recording in Vista like navigating the record dialog? - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Tuesday, September 11, 2007 3:07 PM Subject: RE: Recording in Vista Well, that's quite a broad question. For me, it works quite well for basic editing, applying of affects etc, using the keyboard functions. But if you have any specific tasks in mind I can try to be more specific. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of GianniP46 Sent: Tuesday, 11 September 2007 2:12 p.m. To: PC Audio Discussion List Subject: Re: Recording in Vista Jonathan, As the Jaws Guru, can you please give us some tips on using SF with Jaws without script support - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Monday, September 10, 2007 1:23 AM Subject: RE: Recording in Vista Hi, I'm using version 9 without any scripts. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of GianniP46 Sent: Monday, 10 September 2007 2:02 p.m. To: PC Audio Discussion List Subject: Re: Recording in Vista Hi Jonathan, What Version of Sound Forge with what scripts are you using? - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Sunday, September 09, 2007 9:31 PM Subject: RE: Recording in Vista Hi Samuel, this is absolutely not the case. I use Sound Forge and Studio Recorder to record all kinds of things in Windows Vista, and they work very well. Some sound card drivers are apparently better than others, but you get that with new operating systems until things sort themselves out. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Samuel Wilkins Sent: Saturday, 8 September 2007 8:12 a.m. To: pc-audio@pc-audio.org Subject: Recording in Vista Hello, I believe you can't record in Vista without the Freecorder toolbar. Could you please send the article that was posted on the list to me? I was also wondering if the creative soundcards will record with What you Hear in Goldwave in Vista. Thanks. Samuel Wilkins Email [EMAIL PROTECTED] Skype Cleverclogs6953 MSN Instant Messenger [EMAIL PROTECTED] A O L Instant Messenger Samuel4851 Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] -- No virus found in this incoming message. Checked by AVG Free Edition.
Re: Good digital recorder for recording confreences and lectures
Hello Dean, I have used my DS-50 in a number of situations, including the Mormon Tabernacle Building back in August, and in all cases I feel it did a good job. Check out the August 2007 section of the Blind Access Journal for a podcast. Please visit http://BlindWebAccess.com and sign the petition asking Yahoo! to make their CAPTCHA accessible! Darrell Shandrow - Accessibility Evangelist Information should be accessible to us without need of translation by another person. Blind Access Journal blog and podcast: http://www.blindaccessjournal.com Check out high quality telecommunications services at http://ld.net/?nu7i - Original Message - From: Dean Martineau [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 4:54 PM Subject: Good digital recorder for recording confreences and lectures Hello. I have listened to many of the podcasts about digital recorders. I would like a small one for recording conferences and lectures. I would love the ease of use of the Olympus Ds-50, and don't need more space than it is limited to, but want to get the best quality I can. My frames of reference are cassette-recorder built-in mics and the build-in mic on the PtR2, which is terrible. If I were to spend under US $300, 1. Does the Ds-50 do a good job in conference situations, better than the two benchmarks I've mentioned? 2. How does your recorder, whichever you use, do in lecture or conference situations? I appreciate nay input. Thanks. Dean Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: Good digital recorder for recording confreences and lectures
Hi, I can't compare my unit against your test units as I have never tried them out. I use the milestone 311 which has good recording quality but no editing properties. hth...KG - Original Message - From: Dean Martineau [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 5:54 PM Subject: Good digital recorder for recording confreences and lectures Hello. I have listened to many of the podcasts about digital recorders. I would like a small one for recording conferences and lectures. I would love the ease of use of the Olympus Ds-50, and don't need more space than it is limited to, but want to get the best quality I can. My frames of reference are cassette-recorder built-in mics and the build-in mic on the PtR2, which is terrible. If I were to spend under US $300, 1. Does the Ds-50 do a good job in conference situations, better than the two benchmarks I've mentioned? 2. How does your recorder, whichever you use, do in lecture or conference situations? I appreciate nay input. Thanks. Dean Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: sf8 and the arrows.
You will note that I changed one thing in the subject line. The reason for this is that I encountered something really strange last evening while doing some editing in SF8. Ordinarily, using right and left arrows always seem to move by a predictable amount of time. But, for some reason last evening moving backward and forward was jumping a much longer amount of time that didn't even to always seem to be a consistant amount of time. If anyone has any ideas what would have caused this I would really like to know what was going on. I finally ended up doing the editing I needed to do in Studio Recorder. - Original Message - From: Jonathan Mosen [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Wednesday, September 12, 2007 2:18 AM Subject: RE: sf9 and the arrows. Hi Curtis, I am repeating myself but as I say, I have never edited this way. I've always used the arrow keys when Sound Forge is not playing. So I haven't tried this. If it doesn't work for you, I doubt it would work for me. In your original message to which I replied, I didn't realise that you were talking about the arrow keys not working in playback, you only said the arrow keys didn't work, hence the confusion. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Curtis Delzer Sent: Wednesday, 12 September 2007 3:14 p.m. To: PC Audio Discussion List Subject: sf9 and the arrows. Hi Jonathan. I heard in your forging ahead tutorial, you lauded the fact that the arrows in sound forge 4.5, and at the time 5.0 also move you forward and backward while the file is playing. In later versions, the q (loop playback function had to be turned on for it to work, but it did until sf9 on my computer. I mean, simple, right? Why did Sony disable such a feature? I've been using the right/left arrows as changed by the zoom ratio for 5 years since I bought sf5 (when there was a $99 sale for it) and for some reason, my sf9 will not move the spot where the file is playing audibly any more. Like winamp, right left arrow moves the place where the file is playing, like Studio Recorder, why not, any more, Sound Forge? Page up, page down also moved the cursor larger amounts with the larger zoom ratios just as right left arrow did, but you know all this, my question is does it work on your computer, or not? If it does, then there is something definitely wrong with either (1) my configuration or (2) my download was corrupted when I got version 9.0C of the software. Thanks! :) Curtis Delzer - Original Message - From: GianniP46 [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Tuesday, September 11, 2007 7:07 PM Subject: Re: Recording in Vista like navigating the record dialog? - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Tuesday, September 11, 2007 3:07 PM Subject: RE: Recording in Vista Well, that's quite a broad question. For me, it works quite well for basic editing, applying of affects etc, using the keyboard functions. But if you have any specific tasks in mind I can try to be more specific. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of GianniP46 Sent: Tuesday, 11 September 2007 2:12 p.m. To: PC Audio Discussion List Subject: Re: Recording in Vista Jonathan, As the Jaws Guru, can you please give us some tips on using SF with Jaws without script support - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Monday, September 10, 2007 1:23 AM Subject: RE: Recording in Vista Hi, I'm using version 9 without any scripts. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of GianniP46 Sent: Monday, 10 September 2007 2:02 p.m. To: PC Audio Discussion List Subject: Re: Recording in Vista Hi Jonathan, What Version of Sound Forge with what scripts are you using? - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Sunday, September 09, 2007 9:31 PM Subject: RE: Recording in Vista Hi Samuel, this is absolutely not the case. I use Sound Forge and Studio Recorder to record all kinds of things in Windows Vista, and they work very well. Some sound card drivers are apparently better than others, but you get that with new operating systems until things sort themselves out. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Samuel Wilkins Sent: Saturday, 8 September 2007 8:12 a.m. To: pc-audio@pc-audio.org Subject: Recording in Vista Hello, I believe you can't record in Vista without the Freecorder toolbar. Could you please send
Re: Good digital recorder for recording confreences and lectures
It shows up as an external drive. Please visit http://BlindWebAccess.com and sign the petition asking Yahoo! to make their CAPTCHA accessible! Darrell Shandrow - Accessibility Evangelist Information should be accessible to us without need of translation by another person. Blind Access Journal blog and podcast: http://www.blindaccessjournal.com Check out high quality telecommunications services at http://ld.net/?nu7i - Original Message - From: Keith Gillard [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 5:17 PM Subject: Re: Good digital recorder for recording confreences and lectures Hi Darryl, Good point. One can drag the file on to the pc and edit it that way of course. Does the DS50 connect to the PC and show up as an external drive or, is there unique software that needs to be used? Cheers...Keith - Original Message - From: Darrell Shandrow [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 6:13 PM Subject: Re: Good digital recorder for recording confreences and lectures Keith, The Olympus DS-50 also does not enable editing on the unit. Please visit http://BlindWebAccess.com and sign the petition asking Yahoo! to make their CAPTCHA accessible! Darrell Shandrow - Accessibility Evangelist Information should be accessible to us without need of translation by another person. Blind Access Journal blog and podcast: http://www.blindaccessjournal.com Check out high quality telecommunications services at http://ld.net/?nu7i - Original Message - From: Keith Gillard [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 5:06 PM Subject: Re: Good digital recorder for recording confreences and lectures Hi, I can't compare my unit against your test units as I have never tried them out. I use the milestone 311 which has good recording quality but no editing properties. hth...KG - Original Message - From: Dean Martineau [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 5:54 PM Subject: Good digital recorder for recording confreences and lectures Hello. I have listened to many of the podcasts about digital recorders. I would like a small one for recording conferences and lectures. I would love the ease of use of the Olympus Ds-50, and don't need more space than it is limited to, but want to get the best quality I can. My frames of reference are cassette-recorder built-in mics and the build-in mic on the PtR2, which is terrible. If I were to spend under US $300, 1. Does the Ds-50 do a good job in conference situations, better than the two benchmarks I've mentioned? 2. How does your recorder, whichever you use, do in lecture or conference situations? I appreciate nay input. Thanks. Dean Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: Good digital recorder for recording confreences and lectures
Hi Darryl, Good point. One can drag the file on to the pc and edit it that way of course. Does the DS50 connect to the PC and show up as an external drive or, is there unique software that needs to be used? Cheers...Keith - Original Message - From: Darrell Shandrow [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 6:13 PM Subject: Re: Good digital recorder for recording confreences and lectures Keith, The Olympus DS-50 also does not enable editing on the unit. Please visit http://BlindWebAccess.com and sign the petition asking Yahoo! to make their CAPTCHA accessible! Darrell Shandrow - Accessibility Evangelist Information should be accessible to us without need of translation by another person. Blind Access Journal blog and podcast: http://www.blindaccessjournal.com Check out high quality telecommunications services at http://ld.net/?nu7i - Original Message - From: Keith Gillard [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 5:06 PM Subject: Re: Good digital recorder for recording confreences and lectures Hi, I can't compare my unit against your test units as I have never tried them out. I use the milestone 311 which has good recording quality but no editing properties. hth...KG - Original Message - From: Dean Martineau [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 5:54 PM Subject: Good digital recorder for recording confreences and lectures Hello. I have listened to many of the podcasts about digital recorders. I would like a small one for recording conferences and lectures. I would love the ease of use of the Olympus Ds-50, and don't need more space than it is limited to, but want to get the best quality I can. My frames of reference are cassette-recorder built-in mics and the build-in mic on the PtR2, which is terrible. If I were to spend under US $300, 1. Does the Ds-50 do a good job in conference situations, better than the two benchmarks I've mentioned? 2. How does your recorder, whichever you use, do in lecture or conference situations? I appreciate nay input. Thanks. Dean Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: Good digital recorder for recording confreences and lectures
Keith, The Olympus DS-50 also does not enable editing on the unit. Please visit http://BlindWebAccess.com and sign the petition asking Yahoo! to make their CAPTCHA accessible! Darrell Shandrow - Accessibility Evangelist Information should be accessible to us without need of translation by another person. Blind Access Journal blog and podcast: http://www.blindaccessjournal.com Check out high quality telecommunications services at http://ld.net/?nu7i - Original Message - From: Keith Gillard [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 5:06 PM Subject: Re: Good digital recorder for recording confreences and lectures Hi, I can't compare my unit against your test units as I have never tried them out. I use the milestone 311 which has good recording quality but no editing properties. hth...KG - Original Message - From: Dean Martineau [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 5:54 PM Subject: Good digital recorder for recording confreences and lectures Hello. I have listened to many of the podcasts about digital recorders. I would like a small one for recording conferences and lectures. I would love the ease of use of the Olympus Ds-50, and don't need more space than it is limited to, but want to get the best quality I can. My frames of reference are cassette-recorder built-in mics and the build-in mic on the PtR2, which is terrible. If I were to spend under US $300, 1. Does the Ds-50 do a good job in conference situations, better than the two benchmarks I've mentioned? 2. How does your recorder, whichever you use, do in lecture or conference situations? I appreciate nay input. Thanks. Dean Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
RE: Good digital recorder for recording confreences and lectures
I'd read this unit had good recording capabilities but I'd never heard it from a consumer. thanks -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Darrell Shandrow Sent: Thursday, September 13, 2007 7:21 PM To: PC Audio Discussion List Subject: Re: Good digital recorder for recording confreences and lectures It shows up as an external drive. Please visit http://BlindWebAccess.com and sign the petition asking Yahoo! to make their CAPTCHA accessible! Darrell Shandrow - Accessibility Evangelist Information should be accessible to us without need of translation by another person. Blind Access Journal blog and podcast: http://www.blindaccessjournal.com Check out high quality telecommunications services at http://ld.net/?nu7i - Original Message - From: Keith Gillard [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 5:17 PM Subject: Re: Good digital recorder for recording confreences and lectures Hi Darryl, Good point. One can drag the file on to the pc and edit it that way of course. Does the DS50 connect to the PC and show up as an external drive or, is there unique software that needs to be used? Cheers...Keith - Original Message - From: Darrell Shandrow [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 6:13 PM Subject: Re: Good digital recorder for recording confreences and lectures Keith, The Olympus DS-50 also does not enable editing on the unit. Please visit http://BlindWebAccess.com and sign the petition asking Yahoo! to make their CAPTCHA accessible! Darrell Shandrow - Accessibility Evangelist Information should be accessible to us without need of translation by another person. Blind Access Journal blog and podcast: http://www.blindaccessjournal.com Check out high quality telecommunications services at http://ld.net/?nu7i - Original Message - From: Keith Gillard [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 5:06 PM Subject: Re: Good digital recorder for recording confreences and lectures Hi, I can't compare my unit against your test units as I have never tried them out. I use the milestone 311 which has good recording quality but no editing properties. hth...KG - Original Message - From: Dean Martineau [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 5:54 PM Subject: Good digital recorder for recording confreences and lectures Hello. I have listened to many of the podcasts about digital recorders. I would like a small one for recording conferences and lectures. I would love the ease of use of the Olympus Ds-50, and don't need more space than it is limited to, but want to get the best quality I can. My frames of reference are cassette-recorder built-in mics and the build-in mic on the PtR2, which is terrible. If I were to spend under US $300, 1. Does the Ds-50 do a good job in conference situations, better than the two benchmarks I've mentioned? 2. How does your recorder, whichever you use, do in lecture or conference situations? I appreciate nay input. Thanks. Dean Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: Good digital recorder for recording confreences and lectures
O wow it picked up even in there? I'm surprised you could understand what was being spoken and or said even with the ds's mic. For those who are interested, the tabernacle has such great acoustics that you cold drop a pin on the podium and it will be heard from the back of the room. SAG - Original Message - From: Darrell Shandrow [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 5:03 PM Subject: Re: Good digital recorder for recording confreences and lectures Hello Dean, I have used my DS-50 in a number of situations, including the Mormon Tabernacle Building back in August, and in all cases I feel it did a good job. Check out the August 2007 section of the Blind Access Journal for a podcast. Please visit http://BlindWebAccess.com and sign the petition asking Yahoo! to make their CAPTCHA accessible! Darrell Shandrow - Accessibility Evangelist Information should be accessible to us without need of translation by another person. Blind Access Journal blog and podcast: http://www.blindaccessjournal.com Check out high quality telecommunications services at http://ld.net/?nu7i - Original Message - From: Dean Martineau [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 4:54 PM Subject: Good digital recorder for recording confreences and lectures Hello. I have listened to many of the podcasts about digital recorders. I would like a small one for recording conferences and lectures. I would love the ease of use of the Olympus Ds-50, and don't need more space than it is limited to, but want to get the best quality I can. My frames of reference are cassette-recorder built-in mics and the build-in mic on the PtR2, which is terrible. If I were to spend under US $300, 1. Does the Ds-50 do a good job in conference situations, better than the two benchmarks I've mentioned? 2. How does your recorder, whichever you use, do in lecture or conference situations? I appreciate nay input. Thanks. Dean Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: software for copying dvds with nero 7
Hi, i have tried to use this same software with nero 6, and have the check box checked to use nero as you say. After the backup process, it says output files are ready to be burned with appropriate software, but does not continue and automatically prompt me to put in the empty disc or burn. what can be wrong, any idea? - Original Message - From: anthony campbell [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 1:58 AM Subject: Re: software for copying dvds with nero 7 hi casey, yes you can use dvd shrink and nero. just place the dvd in your drive and open dvd shrink. befor you can start the process you need to tell dvd shrink to use nero. open dvd shrink and go to the edit menu in the edit menu will find the preference click on that and shift tab once and then ctrl tab to the file/iso item and tab to use nero. then close and go to the process of a disk. dvd shrink will tell you automatically when to place a blank dsik in to the drive to copy it. hth anthony copying - Original Message - From: Casey [EMAIL PROTECTED] To: PC Audio Pc-audio@pc-audio.org Sent: Saturday, September 08, 2007 5:03 PM Subject: software for copying dvds with nero 7 Hi I am wanting to know what all software I will need along with nero seven for copying copyright protected DVD like movies and TV shows and things like that. How much will the software cots me and where can I order it from and can I order what I will need form one place and get it as a package or do I have to go threw a couple of different places to get what I am needing for this? I have heard about DVD shrink so can I use this for this purpose and if so what else would I need to go along with that. Thanks for any help that I may get on this and I will look forward to what might come on the list about this. Casey Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] __ NOD32 2527 (20070913) Information __ This message was checked by NOD32 antivirus system. http://www.eset.com Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: sf8 and the arrows.
Thanks a lot. - Original Message - From: Curtis Delzer [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 8:08 PM Subject: Re: sf8 and the arrows. you change the zoom ratio by hitting up or down arrow. Up arrow in your case is what was needed to make the jump by the arrows less than it was moving for you. Curtis Delzer p.s. the only way the arrows move by jumping the sound in playback in sf8 is with the loop playback option which must be on, the letter Q toggles that. - Original Message - From: David Tanner [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 7:09 PM Subject: Re: sf8 and the arrows. You will note that I changed one thing in the subject line. The reason for this is that I encountered something really strange last evening while doing some editing in SF8. Ordinarily, using right and left arrows always seem to move by a predictable amount of time. But, for some reason last evening moving backward and forward was jumping a much longer amount of time that didn't even to always seem to be a consistant amount of time. If anyone has any ideas what would have caused this I would really like to know what was going on. I finally ended up doing the editing I needed to do in Studio Recorder. - Original Message - From: Jonathan Mosen [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Wednesday, September 12, 2007 2:18 AM Subject: RE: sf9 and the arrows. Hi Curtis, I am repeating myself but as I say, I have never edited this way. I've always used the arrow keys when Sound Forge is not playing. So I haven't tried this. If it doesn't work for you, I doubt it would work for me. In your original message to which I replied, I didn't realise that you were talking about the arrow keys not working in playback, you only said the arrow keys didn't work, hence the confusion. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Curtis Delzer Sent: Wednesday, 12 September 2007 3:14 p.m. To: PC Audio Discussion List Subject: sf9 and the arrows. Hi Jonathan. I heard in your forging ahead tutorial, you lauded the fact that the arrows in sound forge 4.5, and at the time 5.0 also move you forward and backward while the file is playing. In later versions, the q (loop playback function had to be turned on for it to work, but it did until sf9 on my computer. I mean, simple, right? Why did Sony disable such a feature? I've been using the right/left arrows as changed by the zoom ratio for 5 years since I bought sf5 (when there was a $99 sale for it) and for some reason, my sf9 will not move the spot where the file is playing audibly any more. Like winamp, right left arrow moves the place where the file is playing, like Studio Recorder, why not, any more, Sound Forge? Page up, page down also moved the cursor larger amounts with the larger zoom ratios just as right left arrow did, but you know all this, my question is does it work on your computer, or not? If it does, then there is something definitely wrong with either (1) my configuration or (2) my download was corrupted when I got version 9.0C of the software. Thanks! :) Curtis Delzer - Original Message - From: GianniP46 [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Tuesday, September 11, 2007 7:07 PM Subject: Re: Recording in Vista like navigating the record dialog? - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Tuesday, September 11, 2007 3:07 PM Subject: RE: Recording in Vista Well, that's quite a broad question. For me, it works quite well for basic editing, applying of affects etc, using the keyboard functions. But if you have any specific tasks in mind I can try to be more specific. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of GianniP46 Sent: Tuesday, 11 September 2007 2:12 p.m. To: PC Audio Discussion List Subject: Re: Recording in Vista Jonathan, As the Jaws Guru, can you please give us some tips on using SF with Jaws without script support - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Monday, September 10, 2007 1:23 AM Subject: RE: Recording in Vista Hi, I'm using version 9 without any scripts. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of GianniP46 Sent: Monday, 10 September 2007 2:02 p.m. To: PC Audio Discussion List Subject: Re: Recording in Vista Hi Jonathan, What Version of Sound Forge with what scripts are you using? - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List'
Re: sf8 and the arrows.
you change the zoom ratio by hitting up or down arrow. Up arrow in your case is what was needed to make the jump by the arrows less than it was moving for you. Curtis Delzer p.s. the only way the arrows move by jumping the sound in playback in sf8 is with the loop playback option which must be on, the letter Q toggles that. - Original Message - From: David Tanner [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 7:09 PM Subject: Re: sf8 and the arrows. You will note that I changed one thing in the subject line. The reason for this is that I encountered something really strange last evening while doing some editing in SF8. Ordinarily, using right and left arrows always seem to move by a predictable amount of time. But, for some reason last evening moving backward and forward was jumping a much longer amount of time that didn't even to always seem to be a consistant amount of time. If anyone has any ideas what would have caused this I would really like to know what was going on. I finally ended up doing the editing I needed to do in Studio Recorder. - Original Message - From: Jonathan Mosen [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Wednesday, September 12, 2007 2:18 AM Subject: RE: sf9 and the arrows. Hi Curtis, I am repeating myself but as I say, I have never edited this way. I've always used the arrow keys when Sound Forge is not playing. So I haven't tried this. If it doesn't work for you, I doubt it would work for me. In your original message to which I replied, I didn't realise that you were talking about the arrow keys not working in playback, you only said the arrow keys didn't work, hence the confusion. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Curtis Delzer Sent: Wednesday, 12 September 2007 3:14 p.m. To: PC Audio Discussion List Subject: sf9 and the arrows. Hi Jonathan. I heard in your forging ahead tutorial, you lauded the fact that the arrows in sound forge 4.5, and at the time 5.0 also move you forward and backward while the file is playing. In later versions, the q (loop playback function had to be turned on for it to work, but it did until sf9 on my computer. I mean, simple, right? Why did Sony disable such a feature? I've been using the right/left arrows as changed by the zoom ratio for 5 years since I bought sf5 (when there was a $99 sale for it) and for some reason, my sf9 will not move the spot where the file is playing audibly any more. Like winamp, right left arrow moves the place where the file is playing, like Studio Recorder, why not, any more, Sound Forge? Page up, page down also moved the cursor larger amounts with the larger zoom ratios just as right left arrow did, but you know all this, my question is does it work on your computer, or not? If it does, then there is something definitely wrong with either (1) my configuration or (2) my download was corrupted when I got version 9.0C of the software. Thanks! :) Curtis Delzer - Original Message - From: GianniP46 [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Tuesday, September 11, 2007 7:07 PM Subject: Re: Recording in Vista like navigating the record dialog? - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Tuesday, September 11, 2007 3:07 PM Subject: RE: Recording in Vista Well, that's quite a broad question. For me, it works quite well for basic editing, applying of affects etc, using the keyboard functions. But if you have any specific tasks in mind I can try to be more specific. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of GianniP46 Sent: Tuesday, 11 September 2007 2:12 p.m. To: PC Audio Discussion List Subject: Re: Recording in Vista Jonathan, As the Jaws Guru, can you please give us some tips on using SF with Jaws without script support - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Monday, September 10, 2007 1:23 AM Subject: RE: Recording in Vista Hi, I'm using version 9 without any scripts. Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of GianniP46 Sent: Monday, 10 September 2007 2:02 p.m. To: PC Audio Discussion List Subject: Re: Recording in Vista Hi Jonathan, What Version of Sound Forge with what scripts are you using? - Original Message - From: Jonathan Mosen To: 'PC Audio Discussion List' Sent: Sunday, September 09, 2007 9:31 PM Subject: RE: Recording in Vista Hi Samuel, this is absolutely not the case. I use Sound Forge and Studio Recorder to record all kinds of things in Windows Vista, and they work very well.
ripping software:
I've almost decided on the format to use when I rip 650 disks to a drive. How does windows compare with other rippers in terms of speed? Given the number of disks I'm dealing with, this could be important. thanks Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: Good digital recorder for recording confreences and lectures
The best quality from any recorder will happen with an external microphone placed six to nine inches from the speaker's mouth. I know that this requires toting around at least 25 feet of thick microphone cord and a tripod microphone stand, which is inconvenient and a hassle. yet the great result will speak for themselves many years into the future. Kelly - Original Message - From: Dean Martineau [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 6:54 PM Subject: Good digital recorder for recording confreences and lectures Hello. I have listened to many of the podcasts about digital recorders. I would like a small one for recording conferences and lectures. I would love the ease of use of the Olympus Ds-50, and don't need more space than it is limited to, but want to get the best quality I can. My frames of reference are cassette-recorder built-in mics and the build-in mic on the PtR2, which is terrible. If I were to spend under US $300, 1. Does the Ds-50 do a good job in conference situations, better than the two benchmarks I've mentioned? 2. How does your recorder, whichever you use, do in lecture or conference situations? I appreciate nay input. Thanks. Dean Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
Re: Good digital recorder for recording confreences and lectures
Hi Kelly, Agreed, but there are many times where a recorder needs to be less conspicuous than all that. :) Please visit http://BlindWebAccess.com and sign the petition asking Yahoo! to make their CAPTCHA accessible! Darrell Shandrow - Accessibility Evangelist Information should be accessible to us without need of translation by another person. Blind Access Journal blog and podcast: http://www.blindaccessjournal.com Check out high quality telecommunications services at http://ld.net/?nu7i - Original Message - From: Kelly Pierce [EMAIL PROTECTED] To: PC Audio Discussion List pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 7:50 PM Subject: Re: Good digital recorder for recording confreences and lectures The best quality from any recorder will happen with an external microphone placed six to nine inches from the speaker's mouth. I know that this requires toting around at least 25 feet of thick microphone cord and a tripod microphone stand, which is inconvenient and a hassle. yet the great result will speak for themselves many years into the future. Kelly - Original Message - From: Dean Martineau [EMAIL PROTECTED] To: 'PC Audio Discussion List' pc-audio@pc-audio.org Sent: Thursday, September 13, 2007 6:54 PM Subject: Good digital recorder for recording confreences and lectures Hello. I have listened to many of the podcasts about digital recorders. I would like a small one for recording conferences and lectures. I would love the ease of use of the Olympus Ds-50, and don't need more space than it is limited to, but want to get the best quality I can. My frames of reference are cassette-recorder built-in mics and the build-in mic on the PtR2, which is terrible. If I were to spend under US $300, 1. Does the Ds-50 do a good job in conference situations, better than the two benchmarks I've mentioned? 2. How does your recorder, whichever you use, do in lecture or conference situations? I appreciate nay input. Thanks. Dean Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED] Audio List Help, Guidelines, Archives and more... http://www.pc-audio.org To unsubscribe from this list, send a blank email to: [EMAIL PROTECTED]
