Re: [PD] auto 1 loops pix_film (and pix_movie?)

2009-04-09 Thread Marco Donnarumma
Exactly. Your example is even better than my description... it could be
suitable for the FLOSS manual in my opinion.
best


On Wed, Apr 8, 2009 at 6:37 PM, Jack j...@rybn.org wrote:

 Here a small exemple.++

 Jack


 Le 8 avr. 09 à 16:52, Marco Donnarumma a écrit :

 Yes, Connect the second outlet of [pix_film] to [unpack].
 Then the first outlet of [unpack] will give you the total amount of frames
 of the video you load.
 So you can connect the first outlet of [unpack] to the last inlet of
 [counter]. This will set the maximum value to reach for [counter].
 I use [counter] to play each frame of the video and i send the scratch
 values in its third inlet.

 this is how i do it... but as Derek were suggesting there is the [mod]
 object too.. Derek how do you use it?
 just for curiosity...
 thanks..

 best




 On Wed, Apr 8, 2009 at 3:11 PM, Jack j...@rybn.org wrote:


 Le 8 avr. 09 à 10:34, Marco Donnarumma a écrit :

 Hey..
 thanks Derek, yes i've already done what you're saying for my project
 C::NTR::L and i have a simple process which give me dynamically the total
 frames for each video you load.

 With the 2nd output of [pix_film] for exemple ? ;)
 ++

 Jack


 I was asking just to know the truth about it  :)
 Since i'm using this process a lot i could create a specific example about
 this for FLOSS manual. I have this exact process ready in my patches.
 ATM i'm terribly busy, but i'll keep it in mind and contribute asap.
 best..


 Marco



 Hi Marco,

 This has been normal behavior as long as I have been aware of it. That
 doesn't mean that it's not a bug, however ;-)

 If you want looping + scrubbing, a better way would be to build a
 counter with a [mod] object set to the total number of frames in your
 clip, that way you could change the payback speed of the clip and (with
 some adjustments to the counter) skip around in the frames as well as go
 backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?)

 best!
 Derek

 Marco Donnarumma wrote:
  If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the
  movie sending values to its cold inlet.
  Is this bug connected with the bug you talk about or a normal function
  of the obj.?
 
  besides i noticed pix_movie doens't have this behaviour but is crashing
  on most of the MAC OS i tried with. is this another known issue?


 --
 ::: derek holzer ::: http://blog.myspace.com/macumbista :::
 http://www.vimeo.com/macumbista :::
 ---Oblique Strategy # 37:
 Convert a melodic element into a rhythmic element



 --

 Message: 7
 Date: Tue, 07 Apr 2009 18:22:36 +0200
 From: marius schebella marius.schebe...@gmail.com
 Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?)
 To: Derek Holzer de...@umatic.nl
 Cc: pd-list@iem.at
 Message-ID: 49db7dcc.90...@gmail.com
 Content-Type: text/plain; charset=ISO-8859-1; format=flowed

 Derek Holzer wrote:
  Hi Marco,
 
  This has been normal behavior as long as I have been aware of it. That
  doesn't mean that it's not a bug, however ;-)
 
  If you want looping + scrubbing, a better way would be to build a
  counter with a [mod] object set to the total number of frames in your
  clip, that way you could change the payback speed of the clip and (with
  some adjustments to the counter) skip around in the frames as well as
 go
  backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh
 Marius?)
 

 something like that is already there, but not as a separate example
 (yet...)
 marius.



 --
 Marco Donnarumma aka The !S.A.D!



 Multimedia Artist, Live Performer
 Roma, IT

 LAB: http://www.thesaddj.com | http://www.flxer.net

 EVENT: http://www.liveperformersmeeting.net
 ___
 Pd-list@iem.at mailing list
 UNSUBSCRIBE and account-management -
 http://lists.puredata.info/listinfo/pd-list





 --
 Marco Donnarumma aka The !S.A.D!



 Multimedia Artist, Live Performer
 Roma, IT

 LAB: http://www.thesaddj.com | http://www.flxer.net

 EVENT: http://www.liveperformersmeeting.net






-- 
Marco Donnarumma aka The !S.A.D!



Multimedia Artist, Live Performer
Roma, IT

LAB: http://www.thesaddj.com | http://www.flxer.net

EVENT: http://www.liveperformersmeeting.net
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management - 
http://lists.puredata.info/listinfo/pd-list


Re: [PD] auto 1 loops pix_film (and pix_movie?)

2009-04-08 Thread Marco Donnarumma
Hey..
thanks Derek, yes i've already done what you're saying for my project
C::NTR::L and i have a simple process which give me dynamically the total
frames for each video you load.
I was asking just to know the truth about it  :)
Since i'm using this process a lot i could create a specific example about
this for FLOSS manual. I have this exact process ready in my patches.
ATM i'm terribly busy, but i'll keep it in mind and contribute asap.
best..


Marco



 Hi Marco,

 This has been normal behavior as long as I have been aware of it. That
 doesn't mean that it's not a bug, however ;-)

 If you want looping + scrubbing, a better way would be to build a
 counter with a [mod] object set to the total number of frames in your
 clip, that way you could change the payback speed of the clip and (with
 some adjustments to the counter) skip around in the frames as well as go
 backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?)

 best!
 Derek

 Marco Donnarumma wrote:
  If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the
  movie sending values to its cold inlet.
  Is this bug connected with the bug you talk about or a normal function
  of the obj.?
 
  besides i noticed pix_movie doens't have this behaviour but is crashing
  on most of the MAC OS i tried with. is this another known issue?


 --
 ::: derek holzer ::: http://blog.myspace.com/macumbista :::
 http://www.vimeo.com/macumbista :::
 ---Oblique Strategy # 37:
 Convert a melodic element into a rhythmic element



 --

 Message: 7
 Date: Tue, 07 Apr 2009 18:22:36 +0200
 From: marius schebella marius.schebe...@gmail.com
 Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?)
 To: Derek Holzer de...@umatic.nl
 Cc: pd-list@iem.at
 Message-ID: 49db7dcc.90...@gmail.com
 Content-Type: text/plain; charset=ISO-8859-1; format=flowed

 Derek Holzer wrote:
  Hi Marco,
 
  This has been normal behavior as long as I have been aware of it. That
  doesn't mean that it's not a bug, however ;-)
 
  If you want looping + scrubbing, a better way would be to build a
  counter with a [mod] object set to the total number of frames in your
  clip, that way you could change the payback speed of the clip and (with
  some adjustments to the counter) skip around in the frames as well as go
  backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?)
 

 something like that is already there, but not as a separate example
 (yet...)
 marius.



-- 
Marco Donnarumma aka The !S.A.D!



Multimedia Artist, Live Performer
Roma, IT

LAB: http://www.thesaddj.com | http://www.flxer.net

EVENT: http://www.liveperformersmeeting.net
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management - 
http://lists.puredata.info/listinfo/pd-list


Re: [PD] auto 1 loops pix_film (and pix_movie?)

2009-04-08 Thread Jack


Le 8 avr. 09 à 10:34, Marco Donnarumma a écrit :


Hey..
thanks Derek, yes i've already done what you're saying for my  
project C::NTR::L and i have a simple process which give me  
dynamically the total frames for each video you load.

With the 2nd output of [pix_film] for exemple ? ;)
++

Jack



I was asking just to know the truth about it  :)
Since i'm using this process a lot i could create a specific  
example about this for FLOSS manual. I have this exact process  
ready in my patches.

ATM i'm terribly busy, but i'll keep it in mind and contribute asap.
best..


Marco


Hi Marco,

This has been normal behavior as long as I have been aware of it. That
doesn't mean that it's not a bug, however ;-)

If you want looping + scrubbing, a better way would be to build a
counter with a [mod] object set to the total number of frames in your
clip, that way you could change the payback speed of the clip and  
(with
some adjustments to the counter) skip around in the frames as well  
as go
backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh  
Marius?)


best!
Derek

Marco Donnarumma wrote:
 If i send a [auto 1( to [pix_film] i'm not able anymore to  
scratch the

 movie sending values to its cold inlet.
 Is this bug connected with the bug you talk about or a normal  
function

 of the obj.?

 besides i noticed pix_movie doens't have this behaviour but is  
crashing

 on most of the MAC OS i tried with. is this another known issue?


--
::: derek holzer ::: http://blog.myspace.com/macumbista :::
http://www.vimeo.com/macumbista :::
---Oblique Strategy # 37:
Convert a melodic element into a rhythmic element



--

Message: 7
Date: Tue, 07 Apr 2009 18:22:36 +0200
From: marius schebella marius.schebe...@gmail.com
Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?)
To: Derek Holzer de...@umatic.nl
Cc: pd-list@iem.at
Message-ID: 49db7dcc.90...@gmail.com
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Derek Holzer wrote:
 Hi Marco,

 This has been normal behavior as long as I have been aware of it.  
That

 doesn't mean that it's not a bug, however ;-)

 If you want looping + scrubbing, a better way would be to build a
 counter with a [mod] object set to the total number of frames in  
your
 clip, that way you could change the payback speed of the clip and  
(with
 some adjustments to the counter) skip around in the frames as  
well as go
 backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh  
Marius?)



something like that is already there, but not as a separate example  
(yet...)

marius.


--
Marco Donnarumma aka The !S.A.D!



Multimedia Artist, Live Performer
Roma, IT

LAB: http://www.thesaddj.com | http://www.flxer.net

EVENT: http://www.liveperformersmeeting.net
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management - http://lists.puredata.info/ 
listinfo/pd-list


___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management - 
http://lists.puredata.info/listinfo/pd-list


Re: [PD] auto 1 loops pix_film (and pix_movie?)

2009-04-08 Thread Marco Donnarumma
Yes, Connect the second outlet of [pix_film] to [unpack].
Then the first outlet of [unpack] will give you the total amount of frames
of the video you load.
So you can connect the first outlet of [unpack] to the last inlet of
[counter]. This will set the maximum value to reach for [counter].
I use [counter] to play each frame of the video and i send the scratch
values in its third inlet.

this is how i do it... but as Derek were suggesting there is the [mod]
object too.. Derek how do you use it?
just for curiosity...
thanks..

best




On Wed, Apr 8, 2009 at 3:11 PM, Jack j...@rybn.org wrote:


 Le 8 avr. 09 à 10:34, Marco Donnarumma a écrit :

 Hey..
 thanks Derek, yes i've already done what you're saying for my project
 C::NTR::L and i have a simple process which give me dynamically the total
 frames for each video you load.

 With the 2nd output of [pix_film] for exemple ? ;)
 ++

 Jack


 I was asking just to know the truth about it  :)
 Since i'm using this process a lot i could create a specific example about
 this for FLOSS manual. I have this exact process ready in my patches.
 ATM i'm terribly busy, but i'll keep it in mind and contribute asap.
 best..


 Marco



 Hi Marco,

 This has been normal behavior as long as I have been aware of it. That
 doesn't mean that it's not a bug, however ;-)

 If you want looping + scrubbing, a better way would be to build a
 counter with a [mod] object set to the total number of frames in your
 clip, that way you could change the payback speed of the clip and (with
 some adjustments to the counter) skip around in the frames as well as go
 backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?)

 best!
 Derek

 Marco Donnarumma wrote:
  If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the
  movie sending values to its cold inlet.
  Is this bug connected with the bug you talk about or a normal function
  of the obj.?
 
  besides i noticed pix_movie doens't have this behaviour but is crashing
  on most of the MAC OS i tried with. is this another known issue?


 --
 ::: derek holzer ::: http://blog.myspace.com/macumbista :::
 http://www.vimeo.com/macumbista :::
 ---Oblique Strategy # 37:
 Convert a melodic element into a rhythmic element



 --

 Message: 7
 Date: Tue, 07 Apr 2009 18:22:36 +0200
 From: marius schebella marius.schebe...@gmail.com
 Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?)
 To: Derek Holzer de...@umatic.nl
 Cc: pd-list@iem.at
 Message-ID: 49db7dcc.90...@gmail.com
 Content-Type: text/plain; charset=ISO-8859-1; format=flowed

 Derek Holzer wrote:
  Hi Marco,
 
  This has been normal behavior as long as I have been aware of it. That
  doesn't mean that it's not a bug, however ;-)
 
  If you want looping + scrubbing, a better way would be to build a
  counter with a [mod] object set to the total number of frames in your
  clip, that way you could change the payback speed of the clip and (with
  some adjustments to the counter) skip around in the frames as well as go
  backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh
 Marius?)
 

 something like that is already there, but not as a separate example
 (yet...)
 marius.



 --
 Marco Donnarumma aka The !S.A.D!



 Multimedia Artist, Live Performer
 Roma, IT

 LAB: http://www.thesaddj.com | http://www.flxer.net

 EVENT: http://www.liveperformersmeeting.net
 ___
 Pd-list@iem.at mailing list
 UNSUBSCRIBE and account-management -
 http://lists.puredata.info/listinfo/pd-list





-- 
Marco Donnarumma aka The !S.A.D!



Multimedia Artist, Live Performer
Roma, IT

LAB: http://www.thesaddj.com | http://www.flxer.net

EVENT: http://www.liveperformersmeeting.net
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management - 
http://lists.puredata.info/listinfo/pd-list


Re: [PD] auto 1 loops pix_film (and pix_movie?)

2009-04-08 Thread Derek Holzer
Sorry, no time to patch it for you now, but basically send the total 
number of frames output by [pix_film] to the cold inlet of mod, send the 
output of the counter to the hot inlet of [mod]. By changing the speed 
of the [metro] in the counter, you change frame playback rate. You can 
also put another [mod] below that to loop a smaller section, with a [+] 
following it to make the frame offset.


In bad ASCII:

[metro (playback speed in ms)]
|
[f]x[+1]
|
[mod (total number of frames)]
|
[mod (length of loop in frames)]
|
[+ (starting frame of loop)]
|
(cold inlet of [pix_film])

Hope that makes sense! I'll leave it to you to figure out how to make it 
run backwards ;-)


Best,
D.

Marco Donnarumma wrote:

Yes, Connect the second outlet of [pix_film] to [unpack].
Then the first outlet of [unpack] will give you the total amount of 
frames of the video you load.
So you can connect the first outlet of [unpack] to the last inlet of 
[counter]. This will set the maximum value to reach for [counter].
I use [counter] to play each frame of the video and i send the scratch 
values in its third inlet.


this is how i do it... but as Derek were suggesting there is the [mod] 
object too.. Derek how do you use it?

just for curiosity...
thanks..

best




On Wed, Apr 8, 2009 at 3:11 PM, Jack j...@rybn.org 
mailto:j...@rybn.org wrote:



Le 8 avr. 09 à 10:34, Marco Donnarumma a écrit :


Hey..
thanks Derek, yes i've already done what you're saying for my
project C::NTR::L and i have a simple process which give me
dynamically the total frames for each video you load.

With the 2nd output of [pix_film] for exemple ? ;)
++

Jack



I was asking just to know the truth about it  :)
Since i'm using this process a lot i could create a specific
example about this for FLOSS manual. I have this exact process
ready in my patches.
ATM i'm terribly busy, but i'll keep it in mind and contribute asap.
best..


Marco

 


Hi Marco,

This has been normal behavior as long as I have been aware of
it. That
doesn't mean that it's not a bug, however ;-)

If you want looping + scrubbing, a better way would be to build a
counter with a [mod] object set to the total number of frames
in your
clip, that way you could change the payback speed of the clip
and (with
some adjustments to the counter) skip around in the frames as
well as go
backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial,
eh Marius?)

best!
Derek

Marco Donnarumma wrote:
 If i send a [auto 1( to [pix_film] i'm not able anymore to
scratch the
 movie sending values to its cold inlet.
 Is this bug connected with the bug you talk about or a
normal function
 of the obj.?

 besides i noticed pix_movie doens't have this behaviour but
is crashing
 on most of the MAC OS i tried with. is this another known issue?


--
::: derek holzer ::: http://blog.myspace.com/macumbista :::
http://www.vimeo.com/macumbista :::
---Oblique Strategy # 37:
Convert a melodic element into a rhythmic element



--

Message: 7
Date: Tue, 07 Apr 2009 18:22:36 +0200
From: marius schebella marius.schebe...@gmail.com
mailto:marius.schebe...@gmail.com
Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?)
To: Derek Holzer de...@umatic.nl mailto:de...@umatic.nl
Cc: pd-list@iem.at mailto:pd-list@iem.at
Message-ID: 49db7dcc.90...@gmail.com
mailto:49db7dcc.90...@gmail.com
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

Derek Holzer wrote:
 Hi Marco,

 This has been normal behavior as long as I have been aware
of it. That
 doesn't mean that it's not a bug, however ;-)

 If you want looping + scrubbing, a better way would be to
build a
 counter with a [mod] object set to the total number of
frames in your
 clip, that way you could change the payback speed of the
clip and (with
 some adjustments to the counter) skip around in the frames
as well as go
 backwards, etc etc. (Nice topic for a FLOSS Manuals
tutorial, eh Marius?)


something like that is already there, but not as a separate
example (yet...)
marius.



-- 
Marco Donnarumma aka The !S.A.D!




Multimedia Artist, Live Performer
Roma, IT

LAB: http://www.thesaddj.com | http://www.flxer.net

EVENT: http://www.liveperformersmeeting.net
___
Pd-list@iem.at mailto:Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list

Re: [PD] auto 1 loops pix_film (and pix_movie?)

2009-04-08 Thread Jack

Here a small exemple.++Jack

scratchvideo.pd
Description: Binary data
Le 8 avr. 09 à 16:52, Marco Donnarumma a écrit :Yes, Connect the second outlet of [pix_film] to [unpack].Then the first outlet of [unpack] will give you the total amount of frames of the video you load.So you can connect the first outlet of [unpack] to the last inlet of [counter]. This will set the maximum value to reach for [counter]. I use [counter] to play each frame of the video and i send the scratch values in its third inlet. this is how i do it... but as Derek were suggesting there is the [mod] object too.. Derek how do you use it?just for curiosity... thanks..bestOn Wed, Apr 8, 2009 at 3:11 PM, Jack j...@rybn.org wrote:  Le 8 avr. 09 à 10:34, Marco Donnarumma a écrit :Hey..thanks Derek, yes i've already done what you're saying for my project C::NTR::L and i have a simple process which give me dynamically the total frames for each video you load. With the 2nd output of [pix_film] for exemple ? ;)++JackI was asking just to know the truth about it :) Since i'm using this process a lot i could create a specific example about this for FLOSS manual. I have this exact process ready in my patches.ATM i'm terribly busy, but i'll keep it in mind and contribute asap. best..MarcoHi Marco, This has been normal behavior as long as I have been aware of it. That doesn't mean that it's not a bug, however ;-) If you want looping + scrubbing, a better way would be to build a counter with a [mod] object set to the total number of frames in your clip, that way you could change the payback speed of the clip and (with some adjustments to the counter) skip around in the frames as well as go backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?) best! Derek Marco Donnarumma wrote:  If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the  movie sending values to its cold inlet.  Is this bug connected with the bug you talk about or a normal function  of the obj.?   besides i noticed pix_movie doens't have this behaviour but is crashing  on most of the MAC OS i tried with. is this another known issue? -- ::: derek holzer ::: http://blog.myspace.com/macumbista :::http://www.vimeo.com/macumbista ::: ---Oblique Strategy # 37: "Convert a melodic element into a rhythmic element" -- Message: 7 Date: Tue, 07 Apr 2009 18:22:36 +0200 From: marius schebella marius.schebe...@gmail.com Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?) To: Derek Holzer de...@umatic.nl Cc: pd-list@iem.at Message-ID: 49db7dcc.90...@gmail.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Derek Holzer wrote:  Hi Marco,   This has been normal behavior as long as I have been aware of it. That  doesn't mean that it's not a bug, however ;-)   If you want looping + scrubbing, a better way would be to build a  counter with a [mod] object set to the total number of frames in your  clip, that way you could change the payback speed of the clip and (with  some adjustments to the counter) skip around in the frames as well as go  backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?)  something like that is already there, but not as a separate example (yet...) marius.  -- Marco Donnarumma aka The !S.A.D!Multimedia Artist, Live PerformerRoma, ITLAB: http://www.thesaddj.com | http://www.flxer.net EVENT: http://www.liveperformersmeeting.net___ Pd-list@iem.at mailing listUNSUBSCRIBE and account-management - http://lists.puredata.info/listinfo/pd-list -- Marco Donnarumma aka The !S.A.D!Multimedia Artist, Live PerformerRoma, ITLAB: http://www.thesaddj.com | http://www.flxer.net EVENT: http://www.liveperformersmeeting.net___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management - 
http://lists.puredata.info/listinfo/pd-list


Re: [PD] auto 1 loops pix_film (and pix_movie?)

2009-04-07 Thread Marco Donnarumma
If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the movie
sending values to its cold inlet.
Is this bug connected with the bug you talk about or a normal function of
the obj.?

besides i noticed pix_movie doens't have this behaviour but is crashing on
most of the MAC OS i tried with. is this another known issue?

Marco



Message: 3
Date: Mon, 06 Apr 2009 23:11:23 +0200
From: IOhannes m zmoelnig zmoel...@iem.at
Subject: Re: [PD] auto 1 loops pix_film (and pix_movie?)
To: marius schebella marius.schebe...@gmail.com
Cc: pd-list@iem.at pd-list@iem.at
Message-ID: 49da6ffb.20...@iem.at
Content-Type: text/plain; charset=iso-8859-15; Format=flowed

marius schebella wrote:
 Hi,
 the help patch sais that auto 1 will not loop the movie, but actually
 it does.
 someone want to comment on this?

it's a bug.

mgadsr
IOhannes

-- 
Marco Donnarumma aka The !S.A.D!



Multimedia Artist, Live Performer
Roma, IT

LAB: http://www.thesaddj.com | http://www.flxer.net

EVENT: http://www.liveperformersmeeting.net
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management - 
http://lists.puredata.info/listinfo/pd-list


Re: [PD] auto 1 loops pix_film (and pix_movie?)

2009-04-07 Thread Derek Holzer

Hi Marco,

This has been normal behavior as long as I have been aware of it. That 
doesn't mean that it's not a bug, however ;-)


If you want looping + scrubbing, a better way would be to build a 
counter with a [mod] object set to the total number of frames in your 
clip, that way you could change the payback speed of the clip and (with 
some adjustments to the counter) skip around in the frames as well as go 
backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?)


best!
Derek

Marco Donnarumma wrote:
If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the 
movie sending values to its cold inlet.
Is this bug connected with the bug you talk about or a normal function 
of the obj.?


besides i noticed pix_movie doens't have this behaviour but is crashing 
on most of the MAC OS i tried with. is this another known issue?



--
::: derek holzer ::: http://blog.myspace.com/macumbista ::: 
http://www.vimeo.com/macumbista :::

---Oblique Strategy # 37:
Convert a melodic element into a rhythmic element

___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management - 
http://lists.puredata.info/listinfo/pd-list


Re: [PD] auto 1 loops pix_film (and pix_movie?)

2009-04-07 Thread marius schebella

Derek Holzer wrote:

Hi Marco,

This has been normal behavior as long as I have been aware of it. That 
doesn't mean that it's not a bug, however ;-)


If you want looping + scrubbing, a better way would be to build a 
counter with a [mod] object set to the total number of frames in your 
clip, that way you could change the payback speed of the clip and (with 
some adjustments to the counter) skip around in the frames as well as go 
backwards, etc etc. (Nice topic for a FLOSS Manuals tutorial, eh Marius?)




something like that is already there, but not as a separate example (yet...)
marius.



best!
Derek

Marco Donnarumma wrote:
If i send a [auto 1( to [pix_film] i'm not able anymore to scratch the 
movie sending values to its cold inlet.
Is this bug connected with the bug you talk about or a normal function 
of the obj.?


besides i noticed pix_movie doens't have this behaviour but is 
crashing on most of the MAC OS i tried with. is this another known issue?






___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management - 
http://lists.puredata.info/listinfo/pd-list


[PD] auto 1 loops pix_film (and pix_movie?)

2009-04-06 Thread marius schebella

Hi,
the help patch sais that auto 1 will not loop the movie, but actually 
it does.

someone want to comment on this?
thanks,
marius.
ps. not sure if this applies to pix_movie, too, because I don't use it 
on osx.


___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management - 
http://lists.puredata.info/listinfo/pd-list


Re: [PD] auto 1 loops pix_film (and pix_movie?)

2009-04-06 Thread IOhannes m zmoelnig

marius schebella wrote:

Hi,
the help patch sais that auto 1 will not loop the movie, but actually 
it does.

someone want to comment on this?


it's a bug.

mgadsr
IOhannes


smime.p7s
Description: S/MIME Cryptographic Signature
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management - 
http://lists.puredata.info/listinfo/pd-list