before midnight, 14th April 2007.
Proposals are accepted by email (preferred):
[EMAIL PROTECTED]
Or by post:
LOSS Livecode
c/o Alex McLean
Access Space
1 Sidney Street
Sheffield S1 4RG
Royaume Uni
If sending via email please do not include large attachments - either
' not recognized
any suggestions?
btw, I'm on an AMD64 running ubuntu edgy.
Thanks,
Alex Norman
___
PD-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
/gemframebuffer.cpp
after the includes.
and now gem works via chromium. Maybe the Gem developers could add [or suggest
one that already exists] a compile time option to disable these commands, so
that others might be able to use chromium with gem as well.
-Alex
btw, I've sent this info to the GEM list as well
by the graphics card.
I've attached a diff to the most recent CVS, hopefully this will be useful for
other folks.
-Alex Norman
Index: src/Base/GemMan.cpp
===
RCS file: /cvsroot/pd-gem/Gem/src/Base/GemMan.cpp,v
retrieving revision 1.59
I'll be there..
-Alex Norman
On 6/17/07, Ed Kelly [EMAIL PROTECTED] wrote:
Good to see the list bubbling away nicely,
So, who's going to Denmark this year?
Best,
Ed
Lone Shark Aviation out now on
http://www.pyramidtransmissions.com
http://www.myspace.com/sharktracks
it with just the
built in objects.
I realize that the bang will probably only happen at control rate..
I have another app creating this ramp, and I want to be able to sync
to it in pd [probably just to trigger drum samples]
-Alex
___
PD-list@iem.at mailing list
ahh, nice, that looks great!
-Alex
On 6/24/07, Andy Farnell [EMAIL PROTECTED] wrote:
This sounds like a case where [threshold~] would be exactly what you want.
It is block based, but for triggering drums it might be accurate enough
(play with blocksize).
On Sat, 23 Jun 2007 14:24:36
the object, or a non-rectangular
mapping of the texture onto the sphere.
Any ideas or advice? Does anyone else have experience working with
panoramic video in Gem?
-Alex
___
PD-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http
this, would you please share?
If not, any advice?
Thanks,
-Alex
On 10/10/07, Alex [EMAIL PROTECTED] wrote:
I have some panoramic video that I want to use to texture a hemisphere
[or rather, the bottom half of a sphere].
I cannot simply texture the sphere with the video because the warping
so to make this easy think of a square texture that has a picture the
globe centered inside it.
i want to take that picture and map the flat image of the globe onto a
hemisphere so that you see [in this virtual world] 1/2 of a globe,
warped so that, in the virtual world, it looks correct.
-Alex
.
-Alex
On 10/17/07, marius schebella [EMAIL PROTECTED] wrote:
hmm... no, I don't know how to do it. with gem you can only do
rectangular projection/texturing. so you would have to find a way to
distort the texture so that it will be displayed correctly on one half
of the sphere. you probably need
is there a way to get at these updates without using the autobuild
[notice that the ubuntu autobuild fails on Gem avifile..].
I assume that these changes aren't going into the pd cvs on sourceforge..
-Alex
On Nov 9, 2007 12:13 PM, Hans-Christoph Steiner [EMAIL PROTECTED] wrote:
On Nov 8, 2007
| |
| `-x--' |
*---* ||
| **
.-x--.
| *~ 0.2 |
`-x--'
|
*
|\
| *
| |
.-x-x--.
| dac~ |
`--'
http://doc.gold.ac.uk/~ma503am/alex/textual-patching/
You can
On Mon, 2008-01-07 at 19:35 +0100, Frank Barknecht wrote:
[bang(
x
|[r stop]
|x
||
xx
[until]
x
|
x
[; stop bang(
Yep that would be quick to adapt to. To save me doing more reverse
engineering are there some docs for the (tcl?) .pd file?
cheers
alex
there might be some info you have to send to
the device to turn on the accelerometers and infrared..
-Alex
On Mon, May 5, 2008 at 7:38 AM, Flo Krebs [EMAIL PROTECTED] wrote:
Hello,
Does anybody know if the acceleration data is also transmitted using the HID
standard with the SIXAXIS Controller
global defaults for
these paths [if a sane, standard makefile is given to all developers
to work from]. Maybe I'm missing some vital information though?
-Alex
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http
of m_pd.h, .. what else..? so that it could
be called from a higher up makefile with that info setup already.
-Alex
On Mon, Oct 13, 2008 at 4:20 AM, IOhannes m zmoelnig [EMAIL PROTECTED] wrote:
carmen r wrote:
'externals' cannot be self-sufficient since it will always depend on the
headers in 'pd
[encompassed by another project (which you could point me to)], etc.
Thanks,
Alex
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
I'm running the latest stable (0.41-4) and [midiout] is working, at
least for sending mid clock/start/stop/continue messages. I'm running
linux and use alsa for midi with pd.
-Alex
On Wed, Oct 29, 2008 at 5:20 AM, mrtoftrash [EMAIL PROTECTED] wrote:
For Linux, midiout only works
drum
machine, synthesizer, whatever.. that accepts sync in.
Enjoy!
-Alex
On Wed, Oct 29, 2008 at 4:39 PM, Alex [EMAIL PROTECTED] wrote:
I'm running the latest stable (0.41-4) and [midiout] is working, at
least for sending mid clock/start/stop/continue messages. I'm running
linux and use alsa
a Linux
only user, and preferring to work directly in PD]:
http://crca.ucsd.edu/~jsarlo/pdvst/
Besides the inline editing [inside Live], I haven't thought of a real
example that cannot be done with PD along-side of Live.. though, it is
not as slick..
-Alex
On 1/16/09, harris_pil...@gmx.de harris_pil
in case anyone else might find it useful.
Enjoy,
Alex
x37v_sysex2list.pd
Description: application/puredata
x37v_sysex2list-help.pd
Description: application/puredata
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http
coded limit for the length of sysex
messages in pd? I'd like to increase this limit if possible..
Thanks,
Alex
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
receive 128 data bytes [130 total].
I've attached my test patch [it requires a counter that I've also attached].
Any idea where these limits are set?
-Alex
On 1/16/09, Alex x37v.a...@gmail.com wrote:
I am trying to get a sysex dump into pd, this dump is 226 bytes long.
I use alsa for midi. I'm
Oh, so I've also made one that takes a list and converts it into a
stream of bytes with a sysex start byte as the first output and a
sysex end as the last output.
I've attached it as well... it doesn't do any error checking yet.. but
it has been useful for me :)
-Alex
On Fri, Jan 16, 2009 at 7
F7
but pd doesn't display any output at all from [midiin] or [sysexin]
-Alex
On Fri, Jan 16, 2009 at 3:08 PM, Alex x37v.a...@gmail.com wrote:
I made a little test which I've attached.
With alsa I can receive a maximum sysex message of 98 data bytes [100
total including the start and end
attached the diff [exactly what they do in
Desire Data except I changed the name to be a little more descriptive,
I think].
-Alex
On Sat, Jan 17, 2009 at 7:41 AM, Simon Wise simonzw...@gmail.com wrote:
Alex wrote:
I've been investigating further, I haven't figured out where, in the
source
and sources I want, rather than have to disconnect a
large number of connections every time I start pd. Does anyone know
if there is a way to get pd to not make these connections? [It didn't
used to do this].
-Alex
___
Pd-list@iem.at mailing list
Ahh, good call, here it is [attached].
-Alex
On Sun, Jan 18, 2009 at 10:48 AM, Mathieu Bouchard ma...@artengine.ca wrote:
On Sat, 17 Jan 2009, Alex wrote:
Ahh, thanks! I just viewed the diff of desire data's s_midi_alsa.c and
made the changes I needed for my version.. though, I would
that, at least with my version, dssi~ doesn't like dssi plugins..
Any ideas what I should try next?
Thanks,
Alex
On Fri, Dec 12, 2008 at 6:37 AM, Ivica Ico Bukvic ico.buk...@gmail.com wrote:
Many thanks all for the feedback!
BTW, it appears that sine_faaa crashes dssi consistently
Looks like the release is working for me for dssi, but the ladspa
sine_faaa stuff isn't in this one. i cannot do [dssi~ gverb]
Thanks!
Alex
On Fri, Feb 6, 2009 at 5:40 AM, Jamie Bullock ja...@postlude.co.uk wrote:
On 4 Feb 2009, at 18:18, Alex wrote:
I am able to do [dssi~ gverb].. so
there is [bonk~] in pd
there is also a pd external that uses aubio [in the aubio distro i
think, it is also in apt [ubuntu].
-Alex
On Wed, Apr 8, 2009 at 1:30 PM, Scott Wade wade...@gmail.com wrote:
Hi guys,
Sorry if this is the wrong forum or if the question is too simple - I want
to detect
Well.. i guess list-value already exists.. by Luke Iannini.
And it looks like his approach is almost exactly the same as mine :)
Never mind then!
-Alex
On Wed, May 20, 2009 at 10:01 AM, Alex x37v.a...@gmail.com wrote:
I'm sure someone has already done this but I didn't find it in
list
, so I created [list-value] which works just like
[value] but stores and outputs lists instead of floats.
I've attached the abstraction and a help file in case anyone else
would like to use it.
-Alex
list-value-help.pd
Description: application/puredata
list-value.pd
Description: application
This is pretty nice... thanks! I changed 1 thing and added another
method to the external which might be useful for others [updated the
help with that].
First, I figured the external shouldn't try to start the jack server
if it isn't already started.. so i changed the options used for
creating
grabbing photos in PD!
-Alex
On Thu, Jun 25, 2009 at 7:11 PM, B. Bogartb...@ekran.org wrote:
Hey all,
I have a draft in SVN under bbogart.
I've so far just used it to control cameras and save files on the host
computer, not upload files.
What is your friend hoping to do with it?
In my last
the sysex data but i have to make my sysex packets short
because of PD's limitations.
-Alex
2009/7/7 András Murányi muran...@gmail.com:
Dear Sirs,
I just have never been successful with sysex in Pd and I'm asking for your
kind advice.
Attached is an example for a long sysex message which goes
not great, aconnectgui] and see if
that is the case for you.. disconnect pd from the alsa through port.
-Alex
2009/7/7 András Murányi muran...@gmail.com:
2009/7/8 Alex x37v.a...@gmail.com
- sysex gets fragmented (also when nothing is sent out meanwhile by
other
objects). It is always
and then outputs bytes one by one] and it works quite well
for me.
I've attached it just as an example.
Btw, the sysex loopback code [using the software through] that you
sent initially does work for me.. I get the whole message.
-Alex
2009/7/8 Martin Peach martin.pe...@sympatico.ca:
András Murányi wrote
I'm not 100% but if I were to guess I'd say xxx would be midi channel.
-Alex
On Wed, Jul 8, 2009 at 10:54 AM, Andres Ferrarian...@yahoo.com wrote:
hello,
the martin peach's object midifile has 3 outlets,
the first outlet output a list with 3 numbers:
xxx,note,velocity
what is xxx
I think you're thinking about a different thread, here he is talking
about the midifile object where he specifically mentions notes. I
haven't used the midifile object though so i'm simply guessing based
on the message: xxx, note value, velocity which he mentioned
-Alex
On Wed, Jul 8, 2009
I made my own little help file which pulls the messages apart a little
bit more..
I've attached it.
-Alex
On Wed, Jul 8, 2009 at 1:04 PM, Martin Peachmartin.pe...@sympatico.ca wrote:
Frank Barknecht wrote:
Hallo,
Frank Barknecht hat gesagt: // Frank Barknecht wrote:
Here's what c_seqplay
You could try making it so that you don't send sysex messages on every
change.. just poll for changes at a certain rate.. and only sent the
most recent change at that rate?
-Alex
2009/7/17 András Murányi muran...@gmail.com:
2009/7/8 Alex x37v.a...@gmail.com
I think that pd's midi out doesn't
the two cannot co-exist, just figured I'd let you
know in case you want to seek to other locations within your
score/song.
-Alex
On Thu, Nov 12, 2009 at 10:03 AM, Lorenzo lsut...@libero.it wrote:
I have added a rewind functionality to the jack_transport~ object by Jacob
Lee to ease use
interest would be helping make it happen!
For those unfamiliar with live coding, there's a bit of info here:
http://toplap.org/uk/about/
Thanks very much,
alex
--
http://yaxu.org/
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management
on
windows and [midiout] being dangerous.. I'm not sure if midiin worked
with sysex or not because i couldn't get the sysex out..
Anyone know if this has changed or if there are plans to make sysex
i/o work for windows?
Thanks,
Alex
On Wed, Nov 11, 2009 at 7:23 AM, kristof lauwers
p
BTW, he is using pd 0.41.4-extended
-Alex
On Tue, Feb 2, 2010 at 7:46 PM, Alex x37v.a...@gmail.com wrote:
I just tried this myself on a friend's windows machine running a
relatively recent version of pd extended, though I'm not exactly sure
which one..
it gave me an error
MidiOut Error 1
dumps from synths
[which is what I was trying to do, make a patch editor for the dave
smith instrument's evolver].
-Alex
On Wed, Feb 3, 2010 at 10:04 AM, martin.pe...@sympatico.ca wrote:
I don't think sysex works on linux either; at least I'm trying to send using
[midiout] using alsa midi
I wrote a little abstraction that does list - sysex and another one
that does sysex input - list
They're in the list archives...
-Alex
On Wed, Feb 3, 2010 at 1:52 PM, cyrille henry c...@chnry.net wrote:
martin.pe...@sympatico.ca a écrit :
On linux with alsa midi, sysex output works this way
They're called list2sysex and sysex2list btw.
-Alex
On Wed, Feb 3, 2010 at 4:21 PM, Alex x37v.a...@gmail.com wrote:
I wrote a little abstraction that does list - sysex and another one
that does sysex input - list
They're in the list archives...
-Alex
On Wed, Feb 3, 2010 at 1:52 PM
DorkbotPDX's Pure Data Workshop 2: Interfacing with the world
* what: DorkbotPDX PD (Pure Data workshop);
* who: you and your friends;
* where: PNCA room 205, 1241 NW Johnson St., Portland, OR 97209;
* when: February 21st 1-5pm
* cost: $35 hardware fee - this gets you a Midi Monster - a
Ha, I got a different reply earlier:
We decied to avoid the use of Pd and SuperCollider
for internal and technical resons and unfortunately we cannot change our policy.
So please, if you are interested in the call, please send a more
pertinent question.
So apparently there are reasons but they
will be good.
What does less professional mean here?
alex
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
Where: Collective Agency (322 NW 6th Ave, Suite 200) in Portland, OR,
Occupied Cascadia
Time: 1-5pm
Instructors: Collin, Alex, Jesse, Jason
Cost: FREE
RSVP: Space is limited so send me an email if you'd like to participate.
Make sure to check the webpage above for information about what to bring
We are excited to announce a call for papers for a special issue of
Computer Music Journal, with a deadline of 21st January 2013, for
publication in Spring of the following year. The issue will be guest
edited by Alex McLean, Julian Rohrhuber and Nick Collins, and will
address themes surrounding
/liveinterfaces/
Identica: http://identi.ca/liveinterfaces/
Planning committee:
Alex McLean, University of Sheffield, University of Leeds (from August)
Kate Sicchio, University of Lincoln
Maria Chatzichristodoulou, University of Hull
Scott Hewitt, University of Huddersfield
Ben Dornan, University
Or you can prefix your values with an index and use a common send with
a route after it
[r partial_data]
|
[route 0]
[r partial_data]
|
[route 1]
etc.
On Fri, Jul 27, 2012 at 1:11 PM, tim vets timv...@gmail.com wrote:
2012/7/27 richard duckworth richduckwo...@yahoo.com
Hi all,
thanks for
the resolution.
-Alex
On Thu, Oct 3, 2013 at 1:58 AM, Alvin Google alvin.os...@gmail.com wrote:
I am writing a proposal to use Pure-Data to control LED panels that would
light part of a rock quarry. The panels should both illuminate and show
pixelated imagery (the resolution dependent
We are also looking these for a future project:
http://www.aliexpress.com/item/DC12V-input-12mm-WS2811-pixel-node-100pcs-a-string-IP68-rated/735790044.html
On Thu, Oct 3, 2013 at 8:07 AM, Alex x37v.a...@gmail.com wrote:
I helped build this wall: http://blog.x37v.info/2012/10/10/led-wall
Hi all,
I've been looking for an object or abstraction which gives the highest and
lowest value from a stream of numbers. If anyone has any suggestions it
would be great to hear from you.
Many thanks
Alex
___
PD-list@iem.at mailing list
UNSUBSCRIBE
when pulse all
outputs is selected within arduino-test.pd, although the mounted LED on pin
13 doesn't respond. It seems that the analogue inputs aren't working either.
It's probably something I've overlooked but If anyone has any suggestions it
would be great to hear from you.
Thanks
Alex
with which it communicates waits a
second after opening the connection and before sending this data would this
apply to Pd?
Thanks
Alex
___
PD-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
Hello everyone,
Is there a gui rotary dial for pd or an object similar to pictctrl for
Max/MSP. If not where would a newbie need to start in order to create an
external which does this.
Many thanks
Alex
___
PD-list@iem.at mailing list
UNSUBSCRIBE
there is no
problem. I've also installed Pd Vanilla 0.40-2 which seems to be fine
regardless of the screen resolution. Please click on the link below for a
screen shot.
http://farm3.static.flickr.com/2097/2464690219_11bd0677f5_o.jpg
Any help would be greatly appreciated
Many thanks
Alex
Hello everyone,
Hans thank you for your reply. I did what you suggested but unfortunately
the problem is still there. I also reinstalled Pd-extended. The output from
the terminal is provided below. It seems the Bitstream fonts were already
installed.
Regards
Alex
sudo aptitude install ttf
Hello everyone,
Over the last couple of days I haven't been able to access the Pdlist
Archives by following the link on this page
http://lists.puredata.info/listinfo/pd-list. Has anyone else had the same
problem or dose anyone know of an alternative link?
Thanks
Alex
Hi Derek,
Thanks for your help, I really like markmail!
Thanks,
Alex
2009/3/16 Derek Holzer de...@umatic.nl
Hi Alex,
I had the same problem yesterday. There are three alternates listed at:
http://puredata.info/community/lists
Gmane, Mail Archive and Markmail. One of those should work
Hi everyone,
Is there any way of making MouseState output X-Y coordinates which are
relative to the patch window rather than the screen as a whole?
Thanks,
Alex
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http
in
comparison. I've attached a patch which compares the two waveforms. The
Floss article can be found here
http://en.flossmanuals.net/PureData/GeneratingWaveforms Any help with this
would be very much appreciated, it may just be my soundcard
acting strangely.
Thanks,
Alex
floss oscillator.pd
Description
on the phasor~ to 2048
has solved the problem.
Thanks again,
Alex
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management -
http://lists.puredata.info/listinfo/pd-list
for a professional application is probably too risky in terms of
latency and complexity, but there's always boot camp for macs, and Linux is
free.
-Alex
On Sep 6, 2013, at 9:52 AM, Dan Wilcox danomat...@gmail.com wrote:
Eh no. Both Quicktime and now AVFoundation can do H264 decoding in video
Em Qui, 2006-12-21 às 18:26 +0100, Malte Steiner escreveu:
Hello List,
I recently changed my distribution to 64 Studio. Despite all criticism
against 64bit the performance on this particular laptop increased
dramatically, also with non realtime stuff. Especially video
applications like
72 matches
Mail list logo