> On 05 December 2016 at 14:25 Igor PDML-StR wrote:
>
> Maybe you should not have let your flash doing the software upgrade and do
> it yourself instead! ;-)
> (Those Dang[!]Ling participles ... )
Maybe you should not have let your flash do the software upgrade and done it
Larry,
Despite doing the software upgrade a few weeks ago, my metz 58 is still
not working with the K-1.
Maybe you should not have let your flash doing the software upgrade and do
it yourself instead! ;-)
(Those Dang[!]Ling participles ... )
I haven't had K-1 in my hands, but AF-C
I checked on the K-5 IIs I have here and AF-C works with the AF IR
beam on the flash and the flash fires. I would imagine the K-3 is the
same because I usually leave it in AF-C. Mine is at a friend's house
right now though so I cannot check. Have you tried a pentax flash with
it? It might be that
If you have the rear screen turned off on the K-3 it doesn't flash the
mode as well. Best I can say is to memorize the number of clicks to
your next preferred mode. You can usually tell what mode it is in by
what settings are changeable in the viewfinder too. Like on the K-5
IIs AV and M are only
Smallest keyring flashlight, msy be?
On 4 Dec 2016 05:16, "Larry Colen" wrote:
> Another one that I forgot to ask about. With all of my other cameras,
> when I'd change the mode (M, Av, TAv, Tv ...) it would briefly display on
> the back LCD what the new mode was. Now, that
You can, with the new firmware, set the rear screen to deep red night
vision colour.
At least that won't blind you when you check your shooting mode.
On Sat, Dec 3, 2016 at 9:16 PM Larry Colen wrote:
> Another one that I forgot to ask about. With all of my other cameras,
>
Another one that I forgot to ask about. With all of my other cameras,
when I'd change the mode (M, Av, TAv, Tv ...) it would briefly display
on the back LCD what the new mode was. Now, that doesn't happen. There
doesn't seem to be a way to see the shooting mode in the dark without
going to
I'm sharing this because it just bit me. I was using AF-C mode and it
disabled the autofocus assist light. It also seems to disable the flash.
Despite doing the software upgrade a few weeks ago, my metz 58 is still
not working with the K-1. On the K-5 it shows PTTL, but on the K-1,
just
8 matches
Mail list logo