On Tue, Mar 08, 2011 at 10:43:55PM -0500, Noah Misch wrote:
The patch optimizing that case foundered. We may have it in 9.2.
The current code only kicks in when the destination has no typmod. When the
source/destination type pair are marked (binary coercible) in the output of
\dC, the
On Mar 9, 2011, at 9:56 AM, abcdef wrote:
I use postgresql in red hat linux .
I want to know how I can find out all the procedure stored in the database .
Any SQL command to do it ???
pg_catalog.pg_proc can be use to find all the functions.
Thanks Regards,
Vibhor Kumar
EnterpriseDB
--
Sent via pgsql-general mailing list (pgsql-general@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-general
Hi all,
I have a database with a number of tables that are partitioned monthly,
after that the tables are mostly read only (on rare occasions we may
delete from a table but normally we just drop the partitions). Recently
I've noticed that we have a lot of these tables are vacuumed around the
MD5 is not collision resistant (using the immortal words of wikipedia
http://en.wikipedia.org/wiki/MD5).
This means that it is possible that multiple images will return the same
md5 hash.
The question is, if it screws up and says that an image already exists
and then returns a different
On 03/09/2011 01:27 PM, Sim Zacks wrote:
This means that it is possible that multiple images will return the
same md5 hash.
OTOH, if you had an indexed md5 hash and compared the image only to the
matches, that would be a fast and accurate querying method
--
Sent via pgsql-general mailing list
On Wed, 09 Mar 2011 13:27:16 +0200, Sim Zacks wrote:
MD5 is not collision resistant (using the immortal words of wikipedia
http://en.wikipedia.org/wiki/MD5).
This means that it is possible that multiple images will return the
same md5 hash.
The question is, if it screws up and says that an
On Mon, Mar 7, 2011 at 2:49 AM, Nick Raj nickrajj...@gmail.com wrote:
Hi all,
I want to construct an Composite Index Structure i.e. a combination of
gist and btree.
What i am thinking is that first creating a Rtree structure that is
pointing to another Btree structure.
For example, Suppose
Hey all,
dmitigr= select to_char(1, '9');
to_char
-
1
dmitigr= select length(to_char(1, '9'));
length
2
Why to_char() includes preceding blank space in the result ?
--
// Dmitriy.
2011/3/9 Dmitriy Igrishin dmit...@gmail.com:
Hey all,
dmitigr= select to_char(1, '9');
to_char
-
1
dmitigr= select length(to_char(1, '9'));
length
2
Why to_char() includes preceding blank space in the result ?
it is compatibility with Oracle?
Regards
On 09/03/2011 13:15, Pavel Stehule wrote:
2011/3/9 Dmitriy Igrishindmit...@gmail.com:
Hey all,
dmitigr= select to_char(1, '9');
to_char
-
1
dmitigr= select length(to_char(1, '9'));
length
2
Why to_char() includes preceding blank space in the result ?
it is
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 03/09/2011 03:12 PM, Dmitriy Igrishin wrote:
Hey all,
dmitigr= select to_char(1, '9');
to_char
-
1
dmitigr= select length(to_char(1, '9'));
length
2
Why to_char() includes preceding blank space in the result ?
--
2011/3/9 Pavel Stehule pavel.steh...@gmail.com
2011/3/9 Dmitriy Igrishin dmit...@gmail.com:
Hey all,
dmitigr= select to_char(1, '9');
to_char
-
1
dmitigr= select length(to_char(1, '9'));
length
2
Why to_char() includes preceding blank space in
2011/3/9 Dmitriy Igrishin dmit...@gmail.com:
2011/3/9 Pavel Stehule pavel.steh...@gmail.com
2011/3/9 Dmitriy Igrishin dmit...@gmail.com:
Hey all,
dmitigr= select to_char(1, '9');
to_char
-
1
dmitigr= select length(to_char(1, '9'));
length
2
2011/3/9 Pavel Stehule pavel.steh...@gmail.com
2011/3/9 Dmitriy Igrishin dmit...@gmail.com:
2011/3/9 Pavel Stehule pavel.steh...@gmail.com
2011/3/9 Dmitriy Igrishin dmit...@gmail.com:
Hey all,
dmitigr= select to_char(1, '9');
to_char
-
1
dmitigr=
2011/3/9 Sim Zacks s...@compulab.co.il
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 03/09/2011 03:12 PM, Dmitriy Igrishin wrote:
Hey all,
dmitigr= select to_char(1, '9');
to_char
-
1
dmitigr= select length(to_char(1, '9'));
length
2
Why
Le lundi 07 mars 2011 à 13:09 -0500, Matt a écrit :
Thanks, but I tried that originally and the companies that come up
have either poor ratings, won't support postgres, won't allow me the
freedom to run my own software
This is what I use for hosting the site that's in my sig :
Hello,
I'm using CentOS 5.5 with PostgreSQL 8.4.7 and
am migrating my site from phpBB 3 to Drupal 7.
I would like to copy these fields from one table:
select user_id, username, user_email, user_regdate, user_lastvisit
from phpbb_users where user_id 50;
into the other (already existing)
On Mar 9, 2011, at 7:28 PM, Sandy Test wrote:
We have postgreSQL 8.3.8 installed on a windows 8 server (64 bit).
We want to be able to run a nightly backup using the pg_dump command.
Unfortunately, even with the pg_hba.conf fix of adding host postgres … trust,
It still asks for a
On Wed, Mar 09, 2011 at 02:47:46PM +0100, Alexander Farber wrote:
I would like to copy these fields from one table:
select user_id, username, user_email, user_regdate, user_lastvisit
from phpbb_users where user_id 50;
into the other (already existing) table:
select uid, name, mail,
On Mar 9, 2011, at 08:47 , Alexander Farber wrote:
Hello,
I'm using CentOS 5.5 with PostgreSQL 8.4.7 and
am migrating my site from phpBB 3 to Drupal 7.
I would like to copy these fields from one table:
select user_id, username, user_email, user_regdate, user_lastvisit
from
Oh it is called INSERT INTO, thank you!
I still have a problem though:
# select uid, name, mail, created, access from drupal_users;
uid | name |mail| created | access
-+--+++
0 | |
We have postgreSQL 8.3.8 installed on a windows 8 server (64 bit).
We want to be able to run a nightly backup using the pg_dump command.
Unfortunately, even with the pg_hba.conf fix of adding host postgres ...
trust,
It still asks for a password.
1. Is this a 64bit issue? If the
Hi all,
Anyone have a suggestion for a graphical ER tool that can work with
Postgresql's domains and custom types?
I was using Mogwai designer but it can't reverse engineer a DB with the
above.
tia,
arturo
--
Sent via pgsql-general mailing list (pgsql-general@postgresql.org)
To make
On 09/03/2011 14:21, Alexander Farber wrote:
Oh it is called INSERT INTO, thank you!
I still have a problem though:
# select uid, name, mail, created, access from drupal_users;
uid | name |mail| created | access
On Wed, Mar 09, 2011 at 10:52:25AM +, Michael Graham wrote:
Perhaps I should just force a vacuum on some of the tables the break it?
It seems to me that you might want to VACUUM FREEZE the table when it
becomes read-only. (I note that FREEZE is deprecated according to the
9.0 manual. Too
Hello Raymond and others,
thank you for looking at my problem!
It is a core Drupal 7 table, with a prefix drupal_
(you can set it while installing Drupal 7 in adv. options).
I have only 2 records in that target table:
# select uid, name, mail, created, access from drupal_users;
uid | name |
On Wed, Mar 09, 2011 at 03:58:20PM +0200, Sandy Test wrote:
We want to be able to run a nightly backup using the pg_dump command.
Unfortunately, even with the pg_hba.conf fix of adding host postgres ...
trust,
It still asks for a password.
pg_hba sometimes surprises people because of
On 03/08/2011 09:06 PM, Andy Colson wrote:
On 3/8/2011 12:28 PM, Andre Lopes wrote:
Hi,
I'm using a bytea field to store small images in base64. I need to
know if I can compare bytea rows for equality. To know for example if
the file already exists in the database, this is possible with
I've also tried renaming 'Alex' to a temp. value:
# update drupal_users set name='Alex_1972' where name='Alex';
UPDATE 1
# INSERT INTO drupal_users (uid, name, mail, created, access)
SELECT user_id, username, user_email, user_regdate, user_lastvisit
FROM phpbb_users
WHERE user_id 50 and
Oh ok, found it:
# select one.username, one.user_id, two.user_id from phpbb_users one,
phpbb_users two where two.username=one.username and two.user_id
one.user_id;
username | user_id | user_id
--+-+-
Вячеслав |7564 | 421
Вячеслав | 421 |7564
(2 rows)
2 Possibilities (assuming there is a single record with name == 'Alex' in
the drupal_users table; not counting uid 0)
1. There is a record with username = 'Alex' in the phpbb_users table
2. Username is not UNIQUE within phpbb_users
Write a select statement to extract username from phpbb_user for
On Tue, Mar 8, 2011 at 11:41 PM, John R Pierce pie...@hogranch.com wrote:
On 03/08/11 5:06 PM, Reece Hart wrote:
I'm considering porting a MySQL database to PostgreSQL. That database uses
MySQL's SET type. Does anyone have advice about representing this type in
PostgreSQL?
MySQL DDL
On Wednesday, March 09, 2011 5:58:20 am Sandy Test wrote:
2. Is there a way of running a dos script that would run the pg_dump
providing a password when prompted?
Using .pgpass
http://www.postgresql.org/docs/9.0/static/libpq-pgpass.html
Thanks
Sandy Test
--
Adrian
Andrew Sullivan a...@crankycanuck.ca writes:
On Wed, Mar 09, 2011 at 03:58:20PM +0200, Sandy Test wrote:
We want to be able to run a nightly backup using the pg_dump command.
Unfortunately, even with the pg_hba.conf fix of adding host postgres ...
trust,
It still asks for a password.
On Wed, Mar 09, 2011 at 10:31:56AM -0500, Tom Lane wrote:
Andrew Sullivan a...@crankycanuck.ca writes:
On Wed, Mar 09, 2011 at 03:58:20PM +0200, Sandy Test wrote:
Unfortunately, even with the pg_hba.conf fix of adding host postgres ...
trust,
If it is asking for a password, and password
On Wednesday, March 09, 2011 5:34:41 am Dmitriy Igrishin wrote:
But I am missing something or there is a documentation inaccuracy:
http://www.postgresql.org/docs/9.0/static/functions-formatting.html#FUNCTIO
NS-FORMATTING-NUMERICMOD-TABLEsays: fill mode (suppress padding blanks and
zeroes)
Hey guys, I'm trying to get a VB program to make a client connection to my
PostgreSQL server running on an
Ubuntu 10.10 server.
Here's what I've done:
Client side - installed and registered the OLE DB .dll's from the PostgreSQL
OLE DB Provider project.
server side -
the
Hey guys, I'm trying to get a VB program to make a client connection to my
PostgreSQL server running on an
Ubuntu 10.10 server.
Here's what I've done:
Client side - installed and registered the OLE DB .dll's from the PostgreSQL
OLE DB Provider project.
server side -
the
On 03/09/2011 07:31 AM, John Edens wrote:
Hey guys, I'm trying to get a VB program to make a client connection
to my PostgreSQL server running on an
Ubuntu 10.10 server
listen_addresses = '*, 144.96.80.35, localhost'
Using * should be fine unless you have multiple IP addresses and
On 03/09/2011 08:30 AM, John Edens wrote:
Hey guys, I'm trying to get a VB program to make a client connection to
my PostgreSQL server running on an
Ubuntu 10.10 server.
Here's what I've done:
Client side - installed and registered the OLE DB .dll's from the
PostgreSQL OLE DB Provider
Hi everyone!
I have a doubt about the memory consumed by each connection open.
suddenly my server, running postgres 8.3.11, began to run too slowly.
Checking the process with: ps -adelfo pcpu,vsz,args | more
The processes,related to the connection to the db, each one have a consume of
On Tue, Mar 8, 2011 at 9:41 PM, John R Pierce pie...@hogranch.com wrote:
why not just have a set of booleans in the table for these individual
on/off attributes? wouldn't that be simplest?
I like that approach, but I think it's unlikely to fly in this specific case
for a couple reasons.
On Wed, Mar 9, 2011 at 10:59 AM, Reece Hart re...@harts.net wrote:
On Tue, Mar 8, 2011 at 9:41 PM, John R Pierce pie...@hogranch.com wrote:
why not just have a set of booleans in the table for these individual
on/off attributes? wouldn't that be simplest?
I like that approach, but I think
PostgreSQL 9.0.3 on Solaris 10 Sparc
I have moved the WAL to a separate file system and set the forcedirectio option
per popular recommendation. My question is this: As standard operating
procedure in our shop, whenever we mount a UFS file system, we use the
logging option. Is there
Dear List ,
if we simply do select count(*) and not specify any table then it gives 1
eg:
bric=# SELECT count(*) from job ;
count
---
2380
(1 row)
bric=# SELECT count(*) job ;
job
-
1
(1 row)
bric=# SELECT count(*) ;
count
---
1
(1 row)
bric=# SELECT count(*)
open system architect (open source), E-R data modeling, DBWrench.
If you are planning to go for paid one than E-R data modeling is the best one.
--
Thanks Regards
Dhaval Jaiswal
-Original Message-
From: pgsql-general-ow...@postgresql.org on behalf of Arturo Perez
Sent: Wed 3/9/2011
In response to Rajesh Kumar Mallah mallah.raj...@gmail.com:
Dear List ,
if we simply do select count(*) and not specify any table then it gives 1
eg:
bric=# SELECT count(*) from job ;
count
---
2380
(1 row)
bric=# SELECT count(*) job ;
job
-
1
(1 row)
Using * should be fine unless you have multiple IP addresses and want the
*server* to *listen* on only some of those addresses - say localhost if you
were running web and db on the same machine and didn't want to listen to
connections from the outside. This setting only determines
2011/3/9 Adrian Klaver adrian.kla...@gmail.com
On Wednesday, March 09, 2011 5:34:41 am Dmitriy Igrishin wrote:
But I am missing something or there is a documentation inaccuracy:
http://www.postgresql.org/docs/9.0/static/functions-formatting.html#FUNCTIO
Are you using any connection pooling system, if not look at the pgpool
pgbouncer.
open connections always reserves memory, which slowdown the performance of
system.
you can also handle application connections at application level by defining
garbage
value if any connection disconnect. It
SELECT username, count(username) FROM phpbb_users
GROUP BY username
HAVING count(username) 1;
If anything shows up then (phpbb_users .username) is not a unique field but
you are trying to insert it into one that is (drupal_users.uid)
-Original Message-
From:
If I am following, 144.96.80.35 is your server address not the clients.
In pg_hba.conf the IPs are those from the clients you want to let in, so
you will need to use an IP or mask that matches that of your client. To
reduce confusion you might want to do that in the section for remote
On 03/09/2011 09:59 AM, Dmitriy Igrishin wrote:
2011/3/9 Adrian Klaver adrian.kla...@gmail.com
mailto:adrian.kla...@gmail.com
On Wednesday, March 09, 2011 5:34:41 am Dmitriy Igrishin wrote:
But I am missing something or there is a documentation inaccuracy:
2011/3/9 Adrian Klaver adrian.kla...@gmail.com
On 03/09/2011 09:59 AM, Dmitriy Igrishin wrote:
2011/3/9 Adrian Klaver adrian.kla...@gmail.com
mailto:adrian.kla...@gmail.com
On Wednesday, March 09, 2011 5:34:41 am Dmitriy Igrishin wrote:
But I am missing something or there
On Wed, Mar 9, 2011 at 9:42 AM, Edmundo Robles L.
erob...@sensacd.com.mx wrote:
Hi everyone!
I have a doubt about the memory consumed by each connection open.
suddenly my server, running postgres 8.3.11, began to run too slowly.
Checking the process with: ps -adelfo pcpu,vsz,args |
On 03/09/2011 09:59 AM, John Edens wrote:
If I am following, 144.96.80.35 is your server address not the clients.
In pg_hba.conf the IPs are those from the clients you want to let in, so
you will need to use an IP or mask that matches that of your client. To
reduce confusion you might want to do
On 03/09/2011 09:54 AM, John Edens wrote:
Using * should be fine unless you have multiple IP addresses and want
the *server* to *listen* on only some of those addresses - say
localhost if you were running web and db on the same machine and
didn't want to listen to connections
i discovered it as a result of typo :)
we usually select expressions without tables
eg select 1+2 ; etc and the results are as expected,
somehow i failed to stretch the analogy to count(*)
which is mostly used over tables or table expression.
thanks anyways.
regds
mallah.
On Wed, Mar 9, 2011
I am getting the following error when I try to restore it from a dump. Any
suggestions?
Regards
hi,
i have a server with pg 8.3.11.
Every now and then, for no apparent reason (io normal, cpu usage normal,
web traffic normal) i see hundreds of connections in PARSE state.
to give some perspective - we're doing in the lowest traffic of the day
around 3000 transactions per second, with ~
Thanks for that explanation, Steve. This is my first time doing much of
anything with a server, so that's all good to know!
John
Your server can have multiple IP addresses. In fact, it almost certainly has
an IP assigned to your NIC and a localhost address. But you could have
That's a great site - I am now making a connection.
Thanks for all the help!
John
-Original Message-
From: Adrian Klaver [mailto:adrian.kla...@gmail.com]
Sent: Wednesday, March 09, 2011 12:28 PM
To: John Edens
Cc: pgsql-general@postgresql.org
Subject: Re: [GENERAL] How to configure for
Hello,
I need to perform conversions (transcoding) between BYTEA and TEXT
columns in a UTF-8 database. I searched for existing solutions and
was unable to find one for 8.x or 9.x, so I cam up with something I'd
like to validate with the more enlightened members of this list...
Case 1:
On Wed, Mar 9, 2011 at 4:09 PM, Vlad Romascanu vromasc...@accurev.com wrote:
Hello,
I need to perform conversions (transcoding) between BYTEA and TEXT
columns in a UTF-8 database. I searched for existing solutions and
was unable to find one for 8.x or 9.x, so I cam up with something I'd
On Wednesday, March 09, 2011 12:19:13 pm akp geek wrote:
I am getting the following error when I try to restore it from a dump. Any
suggestions?
At a guess you are trying to go backwards, using a newer dump file with an
older
pg_restore. In other words doing 9.0 pg_dump and then 8.3
Hi All,
I'm doing a little housekeeping on my tablespaces and I'm curious if there is a
quick and easy way to list all of the objects in a tablespace. Is there a
command to list all objects in a tablespace?
Thanks,
Mike
--
Sent via pgsql-general mailing list (pgsql-general@postgresql.org)
In article
f260108ab230d44cbaa660b47cc4110a06eb9...@blrisbe01.mlcorp.net,
Jaiswal Dhaval Sudhirkumar jaiswa...@microland.com wrote:
E-R data modeling
Couldn't find the E-R data modeling and Open System Architect doesn't
support Mac OS. Forgot to mention that latter in my original post.
Hi Mike,
I tried this, which will get the list of tables belong to 'XYZ' tablespace.
select relname from pg_class where reltablespace=(select oid from
pg_tablespace where spcname='xyz');
Hope this helps
Best Regards,
Raghavendra
EnterpriseDB Corporation
The Enterprise Postgres Company
On Thu,
The following from 9.1 documentation on triggers
SQL allows you to define aliases for the old
and new rows or tables for use in the definition
of the triggered action (e.g., CREATE TRIGGER ... ON
tablename REFERENCING OLD ROW AS somename NEW ROW AS othername
...).
-Original Message-
From: pgsql-general-ow...@postgresql.org [mailto:pgsql-general-
ow...@postgresql.org] On Behalf Of Ray Stell
Sent: Monday, March 07, 2011 10:45 AM
To: runner
Cc: pgsql-general@postgresql.org
Subject: Re: [GENERAL] First production install - general advice
On
Hi,
I've setup 2 nodes for streaming replication and it was working
perfectly. I the tested multiple failovers, switching master/slave,
and now the streaming replication doesn't work anymore.
I had a look at the log and it seems fine LOG: replication
connection authorized: user=postgres
On 10 March 2011 14:21, Sean Hsien sean.hs...@gmail.com wrote:
Hi,
I've setup 2 nodes for streaming replication and it was working
perfectly. I the tested multiple failovers, switching master/slave,
and now the streaming replication doesn't work anymore.
I had a look at the log and it seems
Dear Madam,
I had the same issue tonight.
I sorted it out, perhaps it may help you :)
Convert BOX to a polygon insert some values as per the syntax.
Than run a query
SELECT polygon '((-3,10),(8,18),(-3,30),(-10,20))' @ point '(-8,25)';
let me know if this doesn't work for you ;)
Cheers!
Hi, I use postgres in red hat linux .
When I use psql and select the content of the table .
I find the format is not tidy .
I change align and unalign , the output is not filful my requirement.
Any special setting that can change the line size like oralce to fit my
requirement ???
So, the whole
Hello
2011/3/10 abcdef chuiking...@gmail.com:
Hi, I use postgres in red hat linux .
When I use psql and select the content of the table .
I find the format is not tidy .
I change align and unalign , the output is not filful my requirement.
Any special setting that can change the line size
76 matches
Mail list logo
