Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On 2011-03-21 23:58, Yeb Havinga wrote: On Mon, Mar 21, 2011 at 7:51 PM, Yeb Havinga yebhavi...@gmail.com mailto:yebhavi...@gmail.com wrote: On 2011-03-21 18:04, Robert Haas wrote: On Mon, Mar 21, 2011 at 12:29 PM, Yeb Havingayebhavi...@gmail.com mailto:yebhavi...@gmail.com wrote: pgbench -i -s 50 test Two runs of pgbench -c 10 -M prepared -T 600 test with 1 sync standby - server configs etc were mailed upthread. - performance as of commit e148443ddd95cd29edf4cc1de6188eb9cee029c5 1158 and 1306 (avg 1232) - performance as of current git master 1181 and 1280 (avg 1230,5) - performance as of current git master with sync-standbys-defined-rearrangement applied 1152 and 1269 (avg 1210,5) IMO what these tests have shown is that there is no 20% performance difference between the different versions. To determine if there are differences, n should be a lot higher, or perhaps a single one with a very large duration. pgbench -T 3600: sync-standbys-defined-rearrangement 1270 tps current git master 1306 tps Result of pgbench -T 3 sync-standbys-defined-rearrangement 1267 tps current (or few days old) git master 1326 tps So the patch eats 4,5% from git master's syncrep performance in my setup. Don't know how to measure it better than that. -- Yeb Havinga http://www.mgrid.net/ Mastering Medical Data
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Tue, Mar 22, 2011 at 3:25 PM, Yeb Havinga yebhavi...@gmail.com wrote: So the patch eats 4,5% from git master's syncrep performance in my setup. Don't know how to measure it better than that. That's quite surprising, but I guess the way forward is clear: don't apply that patch. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On 2011-03-21 02:05, Robert Haas wrote: On Sun, Mar 20, 2011 at 11:03 AM, Yeb Havingayebhavi...@gmail.com wrote: On 2011-03-20 05:44, Robert Haas wrote: Hmm, I'm not going to be able to reproduce this here, and my test setup didn't show a clear regression. I can try beating on it some more, but... Any chance you could rerun your test with the latest master-branch code, and perhaps also with the patch I proposed upthread to remove a branch from the section protection by SyncRepLock? I can't really tell from reading the emails you linked what was responsible for the slowdowns and speedups, and it is unclear to me how much impact my recent changes actually had. No problem. Could you tell me the name of the remove a branch from the section protection by SyncRepLock ? patch, or perhaps a message-link? Upthread I see sync-standbys-defined-rearrangement.patch but also two sync-rep-wait-fixes. Thanks! The things I'd like to see compared are: pgbench -i -s 50 test Two runs of pgbench -c 10 -M prepared -T 600 test with 1 sync standby - server configs etc were mailed upthread. - performance as of commit e148443ddd95cd29edf4cc1de6188eb9cee029c5 1158 and 1306 (avg 1232) - performance as of current git master 1181 and 1280 (avg 1230,5) - performance as of current git master with sync-standbys-defined-rearrangement applied 1152 and 1269 (avg 1210,5) -- Yeb Havinga http://www.mgrid.net/ Mastering Medical Data -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Mon, Mar 21, 2011 at 12:29 PM, Yeb Havinga yebhavi...@gmail.com wrote: pgbench -i -s 50 test Two runs of pgbench -c 10 -M prepared -T 600 test with 1 sync standby - server configs etc were mailed upthread. - performance as of commit e148443ddd95cd29edf4cc1de6188eb9cee029c5 1158 and 1306 (avg 1232) - performance as of current git master 1181 and 1280 (avg 1230,5) - performance as of current git master with sync-standbys-defined-rearrangement applied 1152 and 1269 (avg 1210,5) Hmm, that doesn't appear to show the 20% regression Simon claimed upthread. That's good... but I'm confused as to how you are getting numbers this high at all without a BBU. If every commit has to wait for two consecutive fsyncs, cranking out 1200+ commits per second is a lot. Maybe it's just barely plausible if these are 15K drives and all the commits are piggybacking on the fsyncs at top speed, but, man, that's fast. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On 2011-03-21 18:04, Robert Haas wrote: On Mon, Mar 21, 2011 at 12:29 PM, Yeb Havingayebhavi...@gmail.com wrote: pgbench -i -s 50 test Two runs of pgbench -c 10 -M prepared -T 600 test with 1 sync standby - server configs etc were mailed upthread. - performance as of commit e148443ddd95cd29edf4cc1de6188eb9cee029c5 1158 and 1306 (avg 1232) - performance as of current git master 1181 and 1280 (avg 1230,5) - performance as of current git master with sync-standbys-defined-rearrangement applied 1152 and 1269 (avg 1210,5) I ran another pgbench with this last setup, which gives it a 1240,33 average: tps = 1300.786386 (including connections establishing) tps = 1300.844220 (excluding connections establishing) IMO what these tests have shown is that there is no 20% performance difference between the different versions. To determine if there are differences, n should be a lot higher, or perhaps a single one with a very large duration. Hmm, that doesn't appear to show the 20% regression Simon claimed upthread. That's good... but I'm confused as to how you are getting numbers this high at all without a BBU. For the sake of testing syncrep, I put xfs in nobarrier mode on both master and standby: /dev/sdc1 on /xlog type xfs (rw,noatime,nodiratime,nobarrier) /dev/md11 on /archive type xfs (rw,noatime,nodiratime,nobarrier,logdev=/dev/sdc3) /dev/md10 on /data type xfs (rw,noatime,nodiratime,nobarrier,logdev=/dev/sdc2) -- Yeb Havinga http://www.mgrid.net/ Mastering Medical Data -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Mon, Mar 21, 2011 at 7:51 PM, Yeb Havinga yebhavi...@gmail.com wrote: On 2011-03-21 18:04, Robert Haas wrote: On Mon, Mar 21, 2011 at 12:29 PM, Yeb Havingayebhavi...@gmail.com wrote: pgbench -i -s 50 test Two runs of pgbench -c 10 -M prepared -T 600 test with 1 sync standby - server configs etc were mailed upthread. - performance as of commit e148443ddd95cd29edf4cc1de6188eb9cee029c5 1158 and 1306 (avg 1232) - performance as of current git master 1181 and 1280 (avg 1230,5) - performance as of current git master with sync-standbys-defined-rearrangement applied 1152 and 1269 (avg 1210,5) IMO what these tests have shown is that there is no 20% performance difference between the different versions. To determine if there are differences, n should be a lot higher, or perhaps a single one with a very large duration. pgbench -T 3600: sync-standbys-defined-rearrangement 1270 tps current git master 1306 tps -- Yeb Havinga http://www.mgrid.net/ Mastering Medical Data
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On 2011-03-20 05:44, Robert Haas wrote: Hmm, I'm not going to be able to reproduce this here, and my test setup didn't show a clear regression. I can try beating on it some more, but... Any chance you could rerun your test with the latest master-branch code, and perhaps also with the patch I proposed upthread to remove a branch from the section protection by SyncRepLock? I can't really tell from reading the emails you linked what was responsible for the slowdowns and speedups, and it is unclear to me how much impact my recent changes actually had. No problem. Could you tell me the name of the remove a branch from the section protection by SyncRepLock ? patch, or perhaps a message-link? Upthread I see sync-standbys-defined-rearrangement.patch but also two sync-rep-wait-fixes. regards, Yeb Havinga -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Sun, Mar 20, 2011 at 11:03 AM, Yeb Havinga yebhavi...@gmail.com wrote: On 2011-03-20 05:44, Robert Haas wrote: Hmm, I'm not going to be able to reproduce this here, and my test setup didn't show a clear regression. I can try beating on it some more, but... Any chance you could rerun your test with the latest master-branch code, and perhaps also with the patch I proposed upthread to remove a branch from the section protection by SyncRepLock? I can't really tell from reading the emails you linked what was responsible for the slowdowns and speedups, and it is unclear to me how much impact my recent changes actually had. No problem. Could you tell me the name of the remove a branch from the section protection by SyncRepLock ? patch, or perhaps a message-link? Upthread I see sync-standbys-defined-rearrangement.patch but also two sync-rep-wait-fixes. Thanks! The things I'd like to see compared are: - performance as of commit e148443ddd95cd29edf4cc1de6188eb9cee029c5 - performance as of current git master - performance as of current git master with sync-standbys-defined-rearrangement applied -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On 2011-03-18 18:25, Robert Haas wrote: On Fri, Mar 18, 2011 at 1:15 PM, Simon Riggssi...@2ndquadrant.com wrote: On Thu, 2011-03-17 at 09:33 -0400, Robert Haas wrote: Thanks for the review! Lets have a look here... You've added a test inside the lock to see if there is a standby, which I took out for performance reasons. Maybe there's another way, I know that code is fiddly. You've also added back in the lock acquisition at wakeup with very little justification, which was a major performance hit. Together that's about a20% hit in performance in Yeb's tests. I think you should spend a little time thinking how to retune that. Ouch. Do you have a link that describes his testing methodology? I will look at it. Testing 'methodology' sounds a bit heavy. I tested a number of patch versions over time, with 30 second, hourly and nightly pgbench runs. The nightly more for durability/memory leak testing than tps numbers, since I gradually got the impression that pg_bench tests on syncrep setups somehow suffer less from big differences between tests. postgres and recovery.conf I used to test v17 is listed here http://archives.postgresql.org/pgsql-hackers/2011-02/msg02364.php After the tests on v17 I played a bit with small memory changes in the postgres.conf to see if the tps would go up. It went up a little but not enough to mention on the lists. All tests after v17 were done with the postgres.conf that I've copy pasted below. I mentioned a performance regression in http://archives.postgresql.org/pgsql-hackers/2011-03/msg00298.php And performance improvement in http://archives.postgresql.org/pgsql-hackers/2011-03/msg00464.php All three servers (el cheapo consumer grade) the same: triple core AMD's, 16GB ECC, raid 0 over 2 SATA disks, XFS, nobarrier, separated data and xlog partitions. NB: there is no BBU controller in these servers. They don't run production stuff, it's just for testing. 1Gbit ethernet on non-blocking HP switch. No other load. ./configure --enable-depend --with-ossp-uuid --with-libxml --prefix=/mgrid/postgres regards, Yeb Havinga Here's the postgresql.conf non-default I used after each new initdb. (synchronous_replication is off since it prevented me from adding a replication user, so after a initial basebackup I needed to turn it on) #-- # CUSTOMIZED OPTIONS #-- #custom_variable_classes = '' # list of custom variable class names #shared_preload_libraries = 'pg_stat_statements' #custom_variable_classes = 'pg_stat_statements' #pg_stat_statements.max = 100 #pg_stat_statements.track = all syslog_ident = relay autovacuum = off #debug_print_parse = on #debug_print_rewritten = on #debug_print_plan = on #debug_pretty_print = on log_error_verbosity = verbose log_min_messages = warning log_min_error_statement = warning listen_addresses = '*'# what IP address(es) to listen on; search_path='\$user\, public, hl7' archive_mode = on archive_command = 'cd .' checkpoint_completion_target = 0.9 checkpoint_segments = 16 default_statistics_target = 500 constraint_exclusion = on max_connections = 100 maintenance_work_mem = 528MB effective_cache_size = 5GB work_mem = 144MB wal_buffers = 8MB shared_buffers = 528MB wal_level = 'archive' max_wal_senders = 10 wal_keep_segments = 100 # 1600MB (for production increase this) synchronous_standby_names = 'standby1,standby2,standby3' #synchronous_replication = on -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Sat, Mar 19, 2011 at 10:32 AM, Yeb Havinga yebhavi...@gmail.com wrote: Testing 'methodology' sounds a bit heavy. I tested a number of patch versions over time, with 30 second, hourly and nightly pgbench runs. The nightly more for durability/memory leak testing than tps numbers, since I gradually got the impression that pg_bench tests on syncrep setups somehow suffer less from big differences between tests. postgres and recovery.conf I used to test v17 is listed here http://archives.postgresql.org/pgsql-hackers/2011-02/msg02364.php After the tests on v17 I played a bit with small memory changes in the postgres.conf to see if the tps would go up. It went up a little but not enough to mention on the lists. All tests after v17 were done with the postgres.conf that I've copy pasted below. Hmm, I'm not going to be able to reproduce this here, and my test setup didn't show a clear regression. I can try beating on it some more, but... Any chance you could rerun your test with the latest master-branch code, and perhaps also with the patch I proposed upthread to remove a branch from the section protection by SyncRepLock? I can't really tell from reading the emails you linked what was responsible for the slowdowns and speedups, and it is unclear to me how much impact my recent changes actually had. I would have expected the dominant cost to be waiting for the slave to complete its fsync, with network overhead as runner-up. And indeed this appears to be the case on my ext4-based system. I would not have expected contention on SyncRepLock to be much of a factor. It strikes me that if contention on SyncRepLock IS the dominating factor, the whole approach to queue management is pretty well busted. *Every* walsender takes SyncRepLock in exclusive mode on receipt of *every* standby reply message. That seems rather inefficient. To make matters worse, every time a walsender grabs SyncRepLock, it redoes the whole computation of who the synchronous standby is from scratch. It strikes me that it ought to be possible to rejigger things so that when a walsender exits, it signals any other walsenders that exist to recheck whether they need to take over the role of synchronous standby; then, each walsender needs to take the lock and recheck only when it first connects, and each time it's signalled thereafter. When a walsender does decide that a change in the synchronous standby is needed, it should store the ID of the new walsender in shared memory, in a variable protected by SyncRepLock, so that the current synchronous standby can notice the change with a simple integer comparison. It also strikes me that we ought to be able to rejigger things so that the backends being woken up never need to touch shared memory at all - i.e. eliminate syncRepState - thus reducing cache line contention. If WaitLatch() returns true, then the latch was set, presumably by walsender. My recent patch added a couple of places where the latch can be set by the waiting process itself in response to an interrupt, but that case can be handled by adding a backend-local flag variable indicating whether we set the latch ourselves. If we determine that the latch is set and the did-it-myself flag is clear, we can conclude that we were awakened by a walsender and call it good. If the latch is set and the did-it-myself flag is also set, then we were interrupted, and we MAY also have been awakened by walsender at around the same time. We grab SyncRepLock to remove ourselves from the queue, and if we find we're already removed, then we know we were interrupted just as walsender awakened us; otherwise, it's a pure interrupt. It'd be interesting to see the results of some testing with LWLOCK_STATS defined, to see whether SyncRepLock actually is contended and if so to what degree. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Thu, Mar 17, 2011 at 6:00 PM, Jeff Davis pg...@j-davis.com wrote: On Wed, 2011-03-16 at 13:35 -0400, Robert Haas wrote: 2. If a query cancel interrupt is received (pg_cancel_backend or ^C), then cancel the sync rep wait and issue a warning before acknowledging the commit. When I saw this commit, I noticed that the WARNING doesn't have an errcode(). It seems like it should -- this is the kind of thing that the client is likely to care about, and may want to handle specially. Should I invent ERRCODE_WARNING_TRANSACTION_NOT_REPLICATED? -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Fri, 2011-03-18 at 08:27 -0400, Robert Haas wrote: On Thu, Mar 17, 2011 at 6:00 PM, Jeff Davis pg...@j-davis.com wrote: On Wed, 2011-03-16 at 13:35 -0400, Robert Haas wrote: 2. If a query cancel interrupt is received (pg_cancel_backend or ^C), then cancel the sync rep wait and issue a warning before acknowledging the commit. When I saw this commit, I noticed that the WARNING doesn't have an errcode(). It seems like it should -- this is the kind of thing that the client is likely to care about, and may want to handle specially. Should I invent ERRCODE_WARNING_TRANSACTION_NOT_REPLICATED? I think it's reasonable to invent a new code here. Perhaps use the word synchronous rather than replicated, though? Regards, Jeff Davis -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Fri, Mar 18, 2011 at 10:17 AM, Jeff Davis pg...@j-davis.com wrote: On Fri, 2011-03-18 at 08:27 -0400, Robert Haas wrote: On Thu, Mar 17, 2011 at 6:00 PM, Jeff Davis pg...@j-davis.com wrote: On Wed, 2011-03-16 at 13:35 -0400, Robert Haas wrote: 2. If a query cancel interrupt is received (pg_cancel_backend or ^C), then cancel the sync rep wait and issue a warning before acknowledging the commit. When I saw this commit, I noticed that the WARNING doesn't have an errcode(). It seems like it should -- this is the kind of thing that the client is likely to care about, and may want to handle specially. Should I invent ERRCODE_WARNING_TRANSACTION_NOT_REPLICATED? I think it's reasonable to invent a new code here. Perhaps use the word synchronous rather than replicated, though? I think we have to, because it's definitely not the same situation that someone would expect after ERRCODE_QUERY_CANCELLED. But ERRCODE_WARNING_TRANSACTION_NOT_SYNCHRONOUS, which is what I read you reply as suggesting, seems pretty wonky. I wouldn't know what that meant. Another option might be: ERRCODE_(WARNING_?)REPLICATION_WAIT_CANCELLED ...which might have something to recommend it. Other thoughts? -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Fri, 2011-03-18 at 10:27 -0400, Robert Haas wrote: ERRCODE_(WARNING_?)REPLICATION_WAIT_CANCELLED ...which might have something to recommend it. Works for me. Regards, Jeff Davis -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On 18.03.2011 17:38, Jeff Davis wrote: On Fri, 2011-03-18 at 10:27 -0400, Robert Haas wrote: ERRCODE_(WARNING_?)REPLICATION_WAIT_CANCELLED ...which might have something to recommend it. Works for me. Yes, sounds reasonable. Without WARNING_, please. -- Heikki Linnakangas EnterpriseDB http://www.enterprisedb.com -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Fri, Mar 18, 2011 at 11:58 AM, Heikki Linnakangas heikki.linnakan...@enterprisedb.com wrote: On 18.03.2011 17:38, Jeff Davis wrote: On Fri, 2011-03-18 at 10:27 -0400, Robert Haas wrote: ERRCODE_(WARNING_?)REPLICATION_WAIT_CANCELLED ...which might have something to recommend it. Works for me. Yes, sounds reasonable. Without WARNING_, please. The reason I included WARNING is because warnings have their own section in errcodes.txt, and each errcode is marked E for error or W for warning. Since we CAN'T actually error out here, I thought it might be more appropriate to make this a warning; and all of the existing such codes contain WARNING. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Thu, 2011-03-17 at 09:33 -0400, Robert Haas wrote: Thanks for the review! Lets have a look here... You've added a test inside the lock to see if there is a standby, which I took out for performance reasons. Maybe there's another way, I know that code is fiddly. You've also added back in the lock acquisition at wakeup with very little justification, which was a major performance hit. Together that's about a 20% hit in performance in Yeb's tests. I think you should spend a little time thinking how to retune that. I see handling added for ProcDiePending and QueryCancelPending directly into syncrep.c without any comments in postgres.c to indicate that you bypass ProcessInterrupts() in some cases. That looks pretty hokey to me. SyncRepUpdateSyncStandbysDefined() is added into walwriter, which means waiters won't be released if we do a sighup during a fast shutdown, since the walwriter gets killed as soon as that starts. I'm thinking bgwriter should handle that now. -- Simon Riggs http://www.2ndQuadrant.com/books/ PostgreSQL Development, 24x7 Support, Training and Services -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Fri, Mar 18, 2011 at 1:15 PM, Simon Riggs si...@2ndquadrant.com wrote: On Thu, 2011-03-17 at 09:33 -0400, Robert Haas wrote: Thanks for the review! Lets have a look here... You've added a test inside the lock to see if there is a standby, which I took out for performance reasons. Maybe there's another way, I know that code is fiddly. You've also added back in the lock acquisition at wakeup with very little justification, which was a major performance hit. Together that's about a 20% hit in performance in Yeb's tests. I think you should spend a little time thinking how to retune that. Ouch. Do you have a link that describes his testing methodology? I will look at it. I see handling added for ProcDiePending and QueryCancelPending directly into syncrep.c without any comments in postgres.c to indicate that you bypass ProcessInterrupts() in some cases. That looks pretty hokey to me. I can add some comments. Unfortunately, it's not feasible to call ProcessInterrupts() directly from this point in the code - it causes a database panic. SyncRepUpdateSyncStandbysDefined() is added into walwriter, which means waiters won't be released if we do a sighup during a fast shutdown, since the walwriter gets killed as soon as that starts. I'm thinking bgwriter should handle that now. Hmm. I was thinking that doing it in WAL writer would make it more responsive, but since this is a fairly unlikely scenario, it's probably not worth complicating the shutdown sequence to do it the way I did. I'll move it to bgwriter. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
Excerpts from Robert Haas's message of vie mar 18 14:25:16 -0300 2011: On Fri, Mar 18, 2011 at 1:15 PM, Simon Riggs si...@2ndquadrant.com wrote: SyncRepUpdateSyncStandbysDefined() is added into walwriter, which means waiters won't be released if we do a sighup during a fast shutdown, since the walwriter gets killed as soon as that starts. I'm thinking bgwriter should handle that now. Hmm. I was thinking that doing it in WAL writer would make it more responsive, but since this is a fairly unlikely scenario, it's probably not worth complicating the shutdown sequence to do it the way I did. I'll move it to bgwriter. Can't they both do it? -- Álvaro Herrera alvhe...@commandprompt.com The PostgreSQL Company - Command Prompt, Inc. PostgreSQL Replication, Consulting, Custom Development, 24x7 support -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Fri, Mar 18, 2011 at 2:55 PM, Alvaro Herrera alvhe...@commandprompt.com wrote: Excerpts from Robert Haas's message of vie mar 18 14:25:16 -0300 2011: On Fri, Mar 18, 2011 at 1:15 PM, Simon Riggs si...@2ndquadrant.com wrote: SyncRepUpdateSyncStandbysDefined() is added into walwriter, which means waiters won't be released if we do a sighup during a fast shutdown, since the walwriter gets killed as soon as that starts. I'm thinking bgwriter should handle that now. Hmm. I was thinking that doing it in WAL writer would make it more responsive, but since this is a fairly unlikely scenario, it's probably not worth complicating the shutdown sequence to do it the way I did. I'll move it to bgwriter. Can't they both do it? Yeah, but it seems fairly pointless. In retrospect, I probably should have done it the way Simon is proposing to begin with. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
Responding to this again, somewhat out of order... On Fri, Mar 18, 2011 at 1:15 PM, Simon Riggs si...@2ndquadrant.com wrote: Together that's about a 20% hit in performance in Yeb's tests. I think you should spend a little time thinking how to retune that. I've spent some time playing around with pgbench and so far I haven't been able to reliably reproduce this, which is not to say I don't believe the effect is real, but rather that either I'm doing something completely wrong, or it requires some specific setup to measure that doesn't match my environment, or that it's somewhat finicky to reproduce, or some combination of the above. You've added a test inside the lock to see if there is a standby, which I took out for performance reasons. Maybe there's another way, I know that code is fiddly. It seems pretty easy to remove the branch from the test at the top of the function by just rearranging things a bit. Patch attached; does this help? You've also added back in the lock acquisition at wakeup with very little justification, which was a major performance hit. I have a very difficult time believing this is a real problem. That extra lock acquisition and release only happens if WaitLatchOrSocket() returns but MyProc-syncRepState still appears to be SYNC_REP_WAITING. That should only happen if the latch wait hits the timeout (which takes 60 s!) or if the precise memory ordering problem that was put in to fix is occurring (in which case it should dramatically *improve* performance, by avoiding an extra 60 s wait). I stuck in a call to elog(LOG, got here) and it didn't fire even once in a 5-minute pgbench test (~45k transactions). So I have a hard time crediting this for any performance problem. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company sync-standbys-defined-rearrangement.patch Description: Binary data -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Thu, Mar 17, 2011 at 2:35 AM, Robert Haas robertmh...@gmail.com wrote:
1. If a die interrupt is received (pg_terminate_backend or fast
shutdown), then terminate the sync rep wait and arrange for the
connection to be closed without acknowledging the commit (but do send
a warning message back). The commit still happened, though, so other
transactions will see its effects. This is unavoidable unless we're
willing to either ignore attempts to terminate a backend waiting for
sync rep, or panic the system when it happens, and I don't think
either of those is appropriate.
OK.
2. If a query cancel interrupt is received (pg_cancel_backend or ^C),
then cancel the sync rep wait and issue a warning before acknowledging
the commit. Again, the alternative is to either ignore the cancel or
panic, neither of which I believe to be what users will want.
OK.
3. If synchronous_standby_names is changed to '' by editing
postgresql.conf and issuing pg_ctl reload, then cancel all waits in
progress and wake everybody up. As I mentioned before, reloading the
config file from within the waiting backend (which can't safely throw
an error) seems risky,
AFAIR, ProcessConfigFile() doesn't throw an error. So I don't think
that's so risky. But, as you said in another thread, reading config file
at that point is inconsistent, I agree. And it seems better to leave
background process to wake up backends.
so what I did instead is made WAL writer
responsible for handling this. Nobody's allowed to wait for sync rep
unless a global shared memory flag is set, and the WAL writer process
is responsible for setting and clearing this flag when the config file
is reloaded. This has basically no performance cost; WAL writer only
ever does any extra work at all with this code when it receives a
SIGHUP, and even then the work is trivial except in the case where
synchronous_standby_names has changed from empty to non-empty or visca
versa. The advantage of putting this in WAL writer rather than, say,
bgwriter is that WAL writer doesn't have nearly as many jobs to do and
they don't involve nearly as much I/O, so the chances of a long delay
due to the process being busy are much less.
This occurs to me; we should ensure that, in shutdown case, walwriter
should exit after all the backends have gone out? I'm not sure if it's worth
thinking of the case, but what if synchronous_standby_names is unset
and config file is reloaded after smart shutdown is requested? In this
case, the reload cannot wake up the waiting backends since walwriter
has already exited. This behavior looks a bit inconsistent.
4. Remove the SYNC_REP_MUST_DISCONNECT state, which actually does
absolutely nothing right now, despite what the name would seem to
imply. In particular, it doesn't arrange for any sort of disconnect.
This patch does arrange for that, but not using this mechanism.
OK.
5. The existing code relies on being able to read MyProc-syncRepState
without holding the lock, even while a WAL sender must be updating it
in another process. I'm not 100% sure this is safe on a
multi-processor machine with weak memory ordering. In practice, the
chances of something going wrong here seem extremely small. You'd
need something like this: a WAL sender updates MyProc-syncRepState
just after the wait timeout expires and before the latch is reset, but
the regular backend fails to see the state change due to
memory-ordering effects and drops through the loop, waiting another 60
s, and then finally wakes up and completes the wait (but a minute
later than expected). That seems vanishingly unlikely but it's also
simple to protect against, so I did.
In the patch, in order to read the latest value, you take a light-weight lock.
But I wonder why taking a lock can ensure that the value is up-to-date.
Review appreciated.
Thanks! Here are some comments:
+ * WAL writer calls this as needed to update the shared sync_standbys_needed
Typo: s/sync_standbys_needed/sync_standbys_defined
+ * we exit normally, or SYNC_REP_MUST_DISCONNECT in abnormal cases.
Typo: the reference to SYNC_REP_MUST_DISCONNECT is not required.
+* So in this case we issue a NOTICE (which some clients may
Typo: s/NOTICE/WARNING
+ if (ProcDiePending)
+ {
+ ereport(WARNING,
+ (errcode(ERRCODE_ADMIN_SHUTDOWN),
+errmsg(canceling the wait for
replication and terminating
connection due to administrator command),
+errdetail(The transaction has already
been committed locally
but might have not been replicated to the standby.)));
+ whereToSendOutput = DestNone;
+ LWLockAcquire(SyncRepLock, LW_EXCLUSIVE);
+ MyProc-syncRepState = SYNC_REP_WAIT_COMPLETE;
+ SHMQueueDelete((MyProc-syncRepLinks));
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On 16.03.2011 19:35, Robert Haas wrote: 3. If synchronous_standby_names is changed to '' by editing postgresql.conf and issuing pg_ctl reload, then cancel all waits in progress and wake everybody up. As I mentioned before, reloading the config file from within the waiting backend (which can't safely throw an error) seems risky, so what I did instead is made WAL writer responsible for handling this. Nobody's allowed to wait for sync rep unless a global shared memory flag is set, and the WAL writer process is responsible for setting and clearing this flag when the config file is reloaded. This has basically no performance cost; WAL writer only ever does any extra work at all with this code when it receives a SIGHUP, and even then the work is trivial except in the case where synchronous_standby_names has changed from empty to non-empty or visca versa. The advantage of putting this in WAL writer rather than, say, bgwriter is that WAL writer doesn't have nearly as many jobs to do and they don't involve nearly as much I/O, so the chances of a long delay due to the process being busy are much less. Hmm, so setting synchronous_standby_names to '' takes effect immediately, but other changes to it don't apply to already-blocked commits. That seems a bit inconsistent. Perhaps walwriter should store the parsed list of standby-names in shared memory, not just a boolean. +1 otherwise. -- Heikki Linnakangas EnterpriseDB http://www.enterprisedb.com -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Thu, Mar 17, 2011 at 2:08 AM, Fujii Masao masao.fu...@gmail.com wrote:
This occurs to me; we should ensure that, in shutdown case, walwriter
should exit after all the backends have gone out? I'm not sure if it's worth
thinking of the case, but what if synchronous_standby_names is unset
and config file is reloaded after smart shutdown is requested? In this
case, the reload cannot wake up the waiting backends since walwriter
has already exited. This behavior looks a bit inconsistent.
I agree we need to fix smart shutdown. I think that's going to have
to be a separate patch, however; it's got more problems than this
patch can fix without expanding into a monster.
In the patch, in order to read the latest value, you take a light-weight lock.
But I wonder why taking a lock can ensure that the value is up-to-date.
A lock acquisition acts as a memory sequence point.
+ * WAL writer calls this as needed to update the shared sync_standbys_needed
Typo: s/sync_standbys_needed/sync_standbys_defined
Fixed.
+ * we exit normally, or SYNC_REP_MUST_DISCONNECT in abnormal cases.
Typo: the reference to SYNC_REP_MUST_DISCONNECT is not required.
Fixed.
+ * So in this case we issue a NOTICE (which some clients may
Typo: s/NOTICE/WARNING
Fixed.
+ if (ProcDiePending)
+ {
+ ereport(WARNING,
+ (errcode(ERRCODE_ADMIN_SHUTDOWN),
+ errmsg(canceling the wait for
replication and terminating
connection due to administrator command),
+ errdetail(The transaction has
already been committed locally
but might have not been replicated to the standby.)));
+ whereToSendOutput = DestNone;
+ LWLockAcquire(SyncRepLock, LW_EXCLUSIVE);
+ MyProc-syncRepState = SYNC_REP_WAIT_COMPLETE;
+ SHMQueueDelete((MyProc-syncRepLinks));
SHMQueueIsDetached() should be checked before calling SHMQueueDelete().
Walsender can already delete the backend from the queue before reaching here.
Fixed. But come to think of it, doesn't this mean
SyncRepCleanupAtProcExit() needs to repeat the test after acquiring
the lock?
+ if (QueryCancelPending)
+ {
+ QueryCancelPending = false;
+ ereport(WARNING,
+ (errmsg(canceling wait for
synchronous replication due to user request),
+ errdetail(The transaction has
committed locally, but may not
have replicated to the standby.)));
+ LWLockAcquire(SyncRepLock, LW_EXCLUSIVE);
+ MyProc-syncRepState = SYNC_REP_WAIT_COMPLETE;
+ SHMQueueDelete((MyProc-syncRepLinks));
+ LWLockRelease(SyncRepLock);
Same as above.
Fixed.
+ if (!PostmasterIsAlive(true))
+ {
+ whereToSendOutput = DestNone;
+ proc_exit(1);
proc_exit() should not be called at that point because it leads PANIC.
Fixed, although I'm not sure it matters.
I think that it's better to check ProcDiePending, QueryCancelPending
and PostmasterIsAlive *before* waiting on the latch, not after. Because
those events can occur before reaching there, and it's not worth waiting
for 60 seconds to detect them.
Not necessary. Inspired by one of your earlier patches, I made die()
and StatementCancelHandler() set the latch. We could still wait up to
60 s to detect postmaster death, but that's a very rare situation and
it's not worth slowing down the common case for it, especially since
there is a race condition no matter what.
Thanks for the review!
--
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise PostgreSQL Company
sync-rep-wait-fixes-v2.patch
Description: Binary data
--
Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Thu, Mar 17, 2011 at 8:24 AM, Heikki Linnakangas heikki.linnakan...@enterprisedb.com wrote: Hmm, so setting synchronous_standby_names to '' takes effect immediately, but other changes to it don't apply to already-blocked commits. That seems a bit inconsistent. Perhaps walwriter should store the parsed list of standby-names in shared memory, not just a boolean. I don't think this is necessary. In general, the current or potential WAL sender processes are responsible for working out among themselves whose job it is to release waiters, and doing it. As long as synchronous_standby_names is non-empty, then either (1) there are one or more standbys connected that can take on the role of synchronous standby, and whoever does will release waiters or (2) there are no standbys connected that can take on the role of synchronous standbys, in which case no waiters should be released until one connects. But when synchronous_standby_names becomes completely empty, that doesn't mean wait until a standby connects whose application name is in the empty set and make him the synchronous standby but rather synchronous replication is administratively disabled, don't wait in the first place. So we just need a Boolean flag. +1 otherwise. Thanks. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Wed, 2011-03-16 at 13:35 -0400, Robert Haas wrote: 2. If a query cancel interrupt is received (pg_cancel_backend or ^C), then cancel the sync rep wait and issue a warning before acknowledging the commit. When I saw this commit, I noticed that the WARNING doesn't have an errcode(). It seems like it should -- this is the kind of thing that the client is likely to care about, and may want to handle specially. Regards, Jeff Davis -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Tue, 2011-03-15 at 22:07 -0400, Robert Haas wrote: On Wed, Mar 9, 2011 at 11:11 PM, Fujii Masao masao.fu...@gmail.com wrote: Same as above. I think that it's more problematic to leave the code as it is. Because smart/fast shutdown can make the server get stuck until immediate shutdown is requested. I agree that the current state of affairs is a problem. However, after looking through the code somewhat carefully, it looks a bit difficult to fix. Suppose that backend A is waiting for sync rep. A fast shutdown is performed. Right now, backend A shrugs its shoulders and does nothing. Not good. But suppose we change it so that backend A closes the connection and exits without either confirming the commit or throwing ERROR/FATAL. That seems like correct behavior, since, if we weren't using sync rep, the client would have to interpret that as indicating that the connection denied in mid-COMMIT, and mustn't assume anything about the state of the transaction. So far so good. The problem is that there may be another backend B waiting on a lock held by A. If backend A exits cleanly (without a PANIC), it will remove itself from the ProcArray and release locks. That wakes up A, which can now go do its thing. If the operating system is a bit on the slow side delivering the signal to B, then the client to which B is connected might manage to see a database state that shows the transaction previous running in A as committed, even though that transaction wasn't committed. That would stink, because the whole point of having A hold onto locks until the standby ack'd the commit was that no other transaction would see it as committed until it was replicated. This is a pretty unlikely race condition in practice but people who are running sync rep are intending precisely to guard against unlikely failure scenarios. The only idea I have for allowing fast shutdown to still be fast, even when sync rep is involved, is to shut down the system in two phases. The postmaster would need to stop accepting new connections, and first kill off all the backends that aren't waiting for sync rep. Then, once all remaining backends are waiting for sync rep, we can have them proceed as above: close the connection without acking the commit or throwing ERROR/FATAL, and exit. That's pretty complicated, especially given the rule that the postmaster mustn't touch shared memory, but I don't see any alternative. We could just not allow fast shutdown, as now, but I think that's worse. Please explain why not allowing fast shutdown makes it worse? For me, I'd rather not support a whole bunch of dubious code, just to allow you to type -m fast when you can already type -m immediate. What extra capability are we actually delivering by doing that?? The risk of introducing a bug and thereby losing data far outweighs the rather dubious benefit. -- Simon Riggs http://www.2ndQuadrant.com/books/ PostgreSQL Development, 24x7 Support, Training and Services -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Wed, Mar 16, 2011 at 1:43 AM, Fujii Masao masao.fu...@gmail.com wrote: On Wed, Mar 16, 2011 at 11:07 AM, Robert Haas robertmh...@gmail.com wrote: The problem is that there may be another backend B waiting on a lock held by A. If backend A exits cleanly (without a PANIC), it will remove itself from the ProcArray and release locks. That wakes up A, which can now go do its thing. If the operating system is a bit on the slow side delivering the signal to B, then the client to which B is connected might manage to see a database state that shows the transaction previous running in A as committed, even though that transaction wasn't committed. That would stink, because the whole point of having A hold onto locks until the standby ack'd the commit was that no other transaction would see it as committed until it was replicated. The lock can be released also when the transaction running in A is rollbacked. So I could not understand why the client wrongly always see the transaction as commtted even though it's not committed. The transaction IS committed, but only locally. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Wed, Mar 16, 2011 at 4:51 AM, Simon Riggs si...@2ndquadrant.com wrote: On Tue, 2011-03-15 at 22:07 -0400, Robert Haas wrote: On Wed, Mar 9, 2011 at 11:11 PM, Fujii Masao masao.fu...@gmail.com wrote: Same as above. I think that it's more problematic to leave the code as it is. Because smart/fast shutdown can make the server get stuck until immediate shutdown is requested. I agree that the current state of affairs is a problem. However, after looking through the code somewhat carefully, it looks a bit difficult to fix. Suppose that backend A is waiting for sync rep. A fast shutdown is performed. Right now, backend A shrugs its shoulders and does nothing. Not good. But suppose we change it so that backend A closes the connection and exits without either confirming the commit or throwing ERROR/FATAL. That seems like correct behavior, since, if we weren't using sync rep, the client would have to interpret that as indicating that the connection denied in mid-COMMIT, and mustn't assume anything about the state of the transaction. So far so good. The problem is that there may be another backend B waiting on a lock held by A. If backend A exits cleanly (without a PANIC), it will remove itself from the ProcArray and release locks. That wakes up A, which can now go do its thing. If the operating system is a bit on the slow side delivering the signal to B, then the client to which B is connected might manage to see a database state that shows the transaction previous running in A as committed, even though that transaction wasn't committed. That would stink, because the whole point of having A hold onto locks until the standby ack'd the commit was that no other transaction would see it as committed until it was replicated. This is a pretty unlikely race condition in practice but people who are running sync rep are intending precisely to guard against unlikely failure scenarios. The only idea I have for allowing fast shutdown to still be fast, even when sync rep is involved, is to shut down the system in two phases. The postmaster would need to stop accepting new connections, and first kill off all the backends that aren't waiting for sync rep. Then, once all remaining backends are waiting for sync rep, we can have them proceed as above: close the connection without acking the commit or throwing ERROR/FATAL, and exit. That's pretty complicated, especially given the rule that the postmaster mustn't touch shared memory, but I don't see any alternative. We could just not allow fast shutdown, as now, but I think that's worse. Please explain why not allowing fast shutdown makes it worse? For me, I'd rather not support a whole bunch of dubious code, just to allow you to type -m fast when you can already type -m immediate. What extra capability are we actually delivering by doing that?? The risk of introducing a bug and thereby losing data far outweighs the rather dubious benefit. Well, my belief is that when users ask the database to shut down, they want it to work. If I'm the only one who thinks that, then whatever. But I firmly believe we'll get bug reports about this. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Wed, Mar 16, 2011 at 7:39 AM, Robert Haas robertmh...@gmail.com wrote: The only idea I have for allowing fast shutdown to still be fast, even when sync rep is involved, is to shut down the system in two phases. The postmaster would need to stop accepting new connections, and first kill off all the backends that aren't waiting for sync rep. Then, once all remaining backends are waiting for sync rep, we can have them proceed as above: close the connection without acking the commit or throwing ERROR/FATAL, and exit. That's pretty complicated, especially given the rule that the postmaster mustn't touch shared memory, but I don't see any alternative. What extra capability are we actually delivering by doing that?? The risk of introducing a bug and thereby losing data far outweighs the rather dubious benefit. Well, my belief is that when users ask the database to shut down, they want it to work. If I'm the only one who thinks that, then whatever. But I firmly believe we'll get bug reports about this. On further review, the approach proposed above doesn't really work, because a backend can get a SIGTERM either because the system is doing a fast shutdown or because a user has issued pg_terminate_backend(PID); and in the latter case we have to continue letting in connections. As of right now, synchronous replication continues to wait even when: - someone tries to perform a fast shutdown - someone tries to kill the backend using pg_terminate_backend() - someone attempts to cancel the query using pg_cancel_backend() or by pressing control-C in, for example, psql - someone attempts to shut off synchronous replication by changing synchronous_standby_names in postgresql.conf and issuing pg_ctl reload We've worked pretty hard to ensure that things like query cancel and shutdown work quickly and reliably, and I don't think we want to make synchronous replication the one part of the system that departs from that general principle. So, patch attached. This patch arranges to do the following things: 1. If a die interrupt is received (pg_terminate_backend or fast shutdown), then terminate the sync rep wait and arrange for the connection to be closed without acknowledging the commit (but do send a warning message back). The commit still happened, though, so other transactions will see its effects. This is unavoidable unless we're willing to either ignore attempts to terminate a backend waiting for sync rep, or panic the system when it happens, and I don't think either of those is appropriate. 2. If a query cancel interrupt is received (pg_cancel_backend or ^C), then cancel the sync rep wait and issue a warning before acknowledging the commit. Again, the alternative is to either ignore the cancel or panic, neither of which I believe to be what users will want. 3. If synchronous_standby_names is changed to '' by editing postgresql.conf and issuing pg_ctl reload, then cancel all waits in progress and wake everybody up. As I mentioned before, reloading the config file from within the waiting backend (which can't safely throw an error) seems risky, so what I did instead is made WAL writer responsible for handling this. Nobody's allowed to wait for sync rep unless a global shared memory flag is set, and the WAL writer process is responsible for setting and clearing this flag when the config file is reloaded. This has basically no performance cost; WAL writer only ever does any extra work at all with this code when it receives a SIGHUP, and even then the work is trivial except in the case where synchronous_standby_names has changed from empty to non-empty or visca versa. The advantage of putting this in WAL writer rather than, say, bgwriter is that WAL writer doesn't have nearly as many jobs to do and they don't involve nearly as much I/O, so the chances of a long delay due to the process being busy are much less. 4. Remove the SYNC_REP_MUST_DISCONNECT state, which actually does absolutely nothing right now, despite what the name would seem to imply. In particular, it doesn't arrange for any sort of disconnect. This patch does arrange for that, but not using this mechanism. 5. The existing code relies on being able to read MyProc-syncRepState without holding the lock, even while a WAL sender must be updating it in another process. I'm not 100% sure this is safe on a multi-processor machine with weak memory ordering. In practice, the chances of something going wrong here seem extremely small. You'd need something like this: a WAL sender updates MyProc-syncRepState just after the wait timeout expires and before the latch is reset, but the regular backend fails to see the state change due to memory-ordering effects and drops through the loop, waiting another 60 s, and then finally wakes up and completes the wait (but a minute later than expected). That seems vanishingly unlikely but it's also simple to protect against, so I did. Review appreciated. Thanks, -- Robert Haas EnterpriseDB:
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
Robert Haas robertmh...@gmail.com writes: 1. If a die interrupt is received (pg_terminate_backend or fast shutdown), then terminate the sync rep wait and arrange for the connection to be closed without acknowledging the commit (but do send a warning message back). The commit still happened, though, so other transactions will see its effects. This is unavoidable unless we're willing to either ignore attempts to terminate a backend waiting for sync rep, or panic the system when it happens, and I don't think either of those is appropriate. Is it possible to force the standby out here, so that logs show that there was something going on wrt replication? 2. If a query cancel interrupt is received (pg_cancel_backend or ^C), then cancel the sync rep wait and issue a warning before acknowledging the commit. Again, the alternative is to either ignore the cancel or panic, neither of which I believe to be what users will want. Or force the standby to disconnect. In both those cases what we have is a situation were either we can't satisfy the user request or we can't continue to offer sync rep. You're saying that we have to satisfy the user's query, so I say kick off sync rep or it does not make any sense. 3. If synchronous_standby_names is changed to '' by editing postgresql.conf and issuing pg_ctl reload, then cancel all waits in progress and wake everybody up. As I mentioned before, reloading the Ok. Regards, -- Dimitri Fontaine http://2ndQuadrant.fr PostgreSQL : Expertise, Formation et Support -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Wed, Mar 16, 2011 at 6:23 PM, Dimitri Fontaine dimi...@2ndquadrant.fr wrote: Robert Haas robertmh...@gmail.com writes: 1. If a die interrupt is received (pg_terminate_backend or fast shutdown), then terminate the sync rep wait and arrange for the connection to be closed without acknowledging the commit (but do send a warning message back). The commit still happened, though, so other transactions will see its effects. This is unavoidable unless we're willing to either ignore attempts to terminate a backend waiting for sync rep, or panic the system when it happens, and I don't think either of those is appropriate. Is it possible to force the standby out here, so that logs show that there was something going on wrt replication? That's an interesting idea, but I think it might be too much spooky action at a distance. I think we should look at getting Fujii Masao's replication_timeout patch committed; that seems like the right way to kick out unresponsive standbys. Another problem with doing it here is that any ERROR will turn into a PANIC, which rules out doing anything very complicated. Also note that we can (and do) log a WARNING, which I think answers your concern about having something in the logs wrt replication. A further point is that even if we could kick out the standby, it'd presumably reconnect after the usual 2 s interval, so it doesn't seem like it really accomplishes much. We can't just unilaterally decide that it is no longer allowed to be a sync standby ever again; that's controlled by postgresql.conf. I think the most important part of all this is that it is logged. Anyone who is running synchronous replication should also be doing careful monitoring; if not, shame on them, because if your data is important enough that you need synchronous replication, it's surely important enough to watch the logs. If you don't, all sorts of bad things can happen to your data (either related to sync rep, or otherwise) and you'll have no idea until it's far too late. 2. If a query cancel interrupt is received (pg_cancel_backend or ^C), then cancel the sync rep wait and issue a warning before acknowledging the commit. Again, the alternative is to either ignore the cancel or panic, neither of which I believe to be what users will want. Or force the standby to disconnect. In both those cases what we have is a situation were either we can't satisfy the user request or we can't continue to offer sync rep. You're saying that we have to satisfy the user's query, so I say kick off sync rep or it does not make any sense. Same considerations here. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Wed, Mar 16, 2011 at 8:30 PM, Robert Haas robertmh...@gmail.com wrote: I think the most important part of all this is that it is logged. Anyone who is running synchronous replication should also be doing careful monitoring; if not, shame on them, because if your data is important enough that you need synchronous replication, it's surely important enough to watch the logs. If you don't, all sorts of bad things can happen to your data (either related to sync rep, or otherwise) and you'll have no idea until it's far too late. + If your data is that important, your logs/monitoring are *equally* important, because they are what give you confidence your data is as safe as you think it is... -- Aidan Van Dyk Create like a god, ai...@highrise.ca command like a king, http://www.highrise.ca/ work like a slave. -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Wed, Mar 9, 2011 at 11:11 PM, Fujii Masao masao.fu...@gmail.com wrote: Same as above. I think that it's more problematic to leave the code as it is. Because smart/fast shutdown can make the server get stuck until immediate shutdown is requested. I agree that the current state of affairs is a problem. However, after looking through the code somewhat carefully, it looks a bit difficult to fix. Suppose that backend A is waiting for sync rep. A fast shutdown is performed. Right now, backend A shrugs its shoulders and does nothing. Not good. But suppose we change it so that backend A closes the connection and exits without either confirming the commit or throwing ERROR/FATAL. That seems like correct behavior, since, if we weren't using sync rep, the client would have to interpret that as indicating that the connection denied in mid-COMMIT, and mustn't assume anything about the state of the transaction. So far so good. The problem is that there may be another backend B waiting on a lock held by A. If backend A exits cleanly (without a PANIC), it will remove itself from the ProcArray and release locks. That wakes up A, which can now go do its thing. If the operating system is a bit on the slow side delivering the signal to B, then the client to which B is connected might manage to see a database state that shows the transaction previous running in A as committed, even though that transaction wasn't committed. That would stink, because the whole point of having A hold onto locks until the standby ack'd the commit was that no other transaction would see it as committed until it was replicated. This is a pretty unlikely race condition in practice but people who are running sync rep are intending precisely to guard against unlikely failure scenarios. The only idea I have for allowing fast shutdown to still be fast, even when sync rep is involved, is to shut down the system in two phases. The postmaster would need to stop accepting new connections, and first kill off all the backends that aren't waiting for sync rep. Then, once all remaining backends are waiting for sync rep, we can have them proceed as above: close the connection without acking the commit or throwing ERROR/FATAL, and exit. That's pretty complicated, especially given the rule that the postmaster mustn't touch shared memory, but I don't see any alternative. We could just not allow fast shutdown, as now, but I think that's worse. Thoughts? -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Wed, Mar 16, 2011 at 11:07 AM, Robert Haas robertmh...@gmail.com wrote: The problem is that there may be another backend B waiting on a lock held by A. If backend A exits cleanly (without a PANIC), it will remove itself from the ProcArray and release locks. That wakes up A, which can now go do its thing. If the operating system is a bit on the slow side delivering the signal to B, then the client to which B is connected might manage to see a database state that shows the transaction previous running in A as committed, even though that transaction wasn't committed. That would stink, because the whole point of having A hold onto locks until the standby ack'd the commit was that no other transaction would see it as committed until it was replicated. The lock can be released also when the transaction running in A is rollbacked. So I could not understand why the client wrongly always see the transaction as commtted even though it's not committed. Regards, -- Fujii Masao NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On 2011-03-09 08:38, Fujii Masao wrote: On Wed, Mar 9, 2011 at 2:14 PM, Jaime Casanovaja...@2ndquadrant.com wrote: On Tue, Mar 8, 2011 at 11:58 AM, Robert Haasrobertmh...@gmail.com wrote: The fast shutdown handling seems fine, but why not just handle smart shutdown the same way? currently, smart shutdown means no new connections, wait until existing ones close normally. for consistency, it should behave the same for sync rep. Agreed. I think that user who wants to request smart shutdown expects all the existing connections to basically be closed normally by the client. So it doesn't seem to be good idea to forcibly close the connection and prevent the COMMIT from being returned in smart shutdown case. But I'm all ears for better suggestions. For me smart has always been synonymous to no forced disconnects/exits, or put different, the 'clean' solution, as opposite to the fast and unclean shutdown. An alternative for a clean solution might be to forbid smart shutdown, if none of the sync standbys is connected. This would prevent the master to enter a state in which a standby cannot connect anymore. regards, Yeb Havinga -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Wed, Mar 9, 2011 at 08:38, Fujii Masao masao.fu...@gmail.com wrote: On Wed, Mar 9, 2011 at 2:14 PM, Jaime Casanova ja...@2ndquadrant.com wrote: On Tue, Mar 8, 2011 at 11:58 AM, Robert Haas robertmh...@gmail.com wrote: The fast shutdown handling seems fine, but why not just handle smart shutdown the same way? currently, smart shutdown means no new connections, wait until existing ones close normally. for consistency, it should behave the same for sync rep. Agreed. I think that user who wants to request smart shutdown expects all the existing connections to basically be closed normally by the client. So it doesn't seem to be good idea to forcibly close the connection and prevent the COMMIT from being returned in smart shutdown case. But I'm all ears for better suggestions. don't use smart shutdowns? ;) Anyway, for those that *do* use smart intentionally, I agree that doing any kind of forced close at all is just plain wrong. -- Magnus Hagander Me: http://www.hagander.net/ Work: http://www.redpill-linpro.com/ -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Wed, 2011-03-09 at 16:38 +0900, Fujii Masao wrote: On Wed, Mar 9, 2011 at 2:14 PM, Jaime Casanova ja...@2ndquadrant.com wrote: On Tue, Mar 8, 2011 at 11:58 AM, Robert Haas robertmh...@gmail.com wrote: The fast shutdown handling seems fine, but why not just handle smart shutdown the same way? currently, smart shutdown means no new connections, wait until existing ones close normally. for consistency, it should behave the same for sync rep. Agreed. I think that user who wants to request smart shutdown expects all the existing connections to basically be closed normally by the client. So it doesn't seem to be good idea to forcibly close the connection and prevent the COMMIT from being returned in smart shutdown case. But I'm all ears for better suggestions. Anyway, we got the consensus about how fast shutdown should work with sync rep. So I created the patch. Please feel free to comment and commit the patch first ;) We're just about to publish Alpha4 with this feature in. If we release waiters too early we will cause effective data loss, that part is agreed. We've also accepted that there are few ways to release the waiters. I want to release the first version as safe and then relax from there after feedback. What I don't want to hear is lots of complaints or arguments about data loss from the first version. We can relax later, after some time and thought. So for now, I don't want to apply this patch or other similar ones that seek to release waiters in various circumstances. That isn't a rejection of you, its just a wish to play it safe and slowly. -- Simon Riggs http://www.2ndQuadrant.com/books/ PostgreSQL Development, 24x7 Support, Training and Services -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On 2011-03-09 15:10, Simon Riggs wrote: On Wed, 2011-03-09 at 16:38 +0900, Fujii Masao wrote: On Wed, Mar 9, 2011 at 2:14 PM, Jaime Casanovaja...@2ndquadrant.com wrote: On Tue, Mar 8, 2011 at 11:58 AM, Robert Haasrobertmh...@gmail.com wrote: The fast shutdown handling seems fine, but why not just handle smart shutdown the same way? currently, smart shutdown means no new connections, wait until existing ones close normally. for consistency, it should behave the same for sync rep. Agreed. I think that user who wants to request smart shutdown expects all the existing connections to basically be closed normally by the client. So it doesn't seem to be good idea to forcibly close the connection and prevent the COMMIT from being returned in smart shutdown case. But I'm all ears for better suggestions. Anyway, we got the consensus about how fast shutdown should work with sync rep. So I created the patch. Please feel free to comment and commit the patch first ;) We're just about to publish Alpha4 with this feature in. If we release waiters too early we will cause effective data loss, that part is agreed. We've also accepted that there are few ways to release the waiters. I want to release the first version as safe and then relax from there after feedback. This is not safe and possible in the first version: 1) issue stop on master when no sync standby is connected: mgrid@mg73:~$ pg_ctl -D /data stop waiting for server to shut down... failed pg_ctl: server does not shut down 2) start the standby that failed mgrid@mg72:~$ pg_ctl -D /data start pg_ctl: another server might be running; trying to start server anyway LOG: 0: database system was interrupted while in recovery at log time 2011-03-09 15:22:31 CET HINT: If this has occurred more than once some data might be corrupted and you might need to choose an earlier recovery target. LOG: 0: entering standby mode LOG: 0: redo starts at 57/1A78 LOG: 0: consistent recovery state reached at 57/1AA0 FATAL: XX000: could not connect to the primary server: FATAL: the database system is shutting down LOCATION: libpqrcv_connect, libpqwalreceiver.c:102 server starting mgrid@mg72:~$ FATAL: XX000: could not connect to the primary server: FATAL: the database system is shutting down A safe solution would be to prevent smart shutdown on the master if it is in sync mode and there are no sync standbys connected. The current situation is definately unsafe because it forces people that are in this state to do a fast shutdown.. but that fails as well, so they are only left with immediate. mgrid@mg73:~$ pg_ctl -D /data stop -m fast waiting for server to shut down... failed pg_ctl: server does not shut down mgrid@mg73:~$ pg_ctl -D /data stop -m immediate waiting for server to shut down done server stopped regards, Yeb Havinga -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Wed, 2011-03-09 at 15:37 +0100, Yeb Havinga wrote: The current situation is definately unsafe because it forces people that are in this state to do a fast shutdown.. but that fails as well, so they are only left with immediate. All the more reason not to change anything, since we disagree. The idea is that you're supposed to wait for the standby to come back up or do failover. If you shutdown the master its because you are choosing to failover. Shutting down the master and restarting without failover leads to a situation where some sync rep commits are not on both master and standby. Making it easier to shutdown encourages that, which I don't wish to do, at this stage. We may decide that this is the right approach but I don't wish to rush into that decision. I want to have clear agreement about all the changes we want and what we call them if we do them. Zero data loss is ultimately about users having confidence in us, not about specific features. Our disagreements on this patch risk damaging that confidence, whoever is right/wrong. Further changes can be made over the course of the next few weeks, based upon feedback from a wider pool of potential users. -- Simon Riggs http://www.2ndQuadrant.com/books/ PostgreSQL Development, 24x7 Support, Training and Services -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Re: Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Thu, Mar 10, 2011 at 12:03 AM, Simon Riggs si...@2ndquadrant.com wrote: On Wed, 2011-03-09 at 15:37 +0100, Yeb Havinga wrote: The current situation is definately unsafe because it forces people that are in this state to do a fast shutdown.. but that fails as well, so they are only left with immediate. I agree with Yeb. All the more reason not to change anything, since we disagree. The idea is that you're supposed to wait for the standby to come back up or do failover. If you shutdown the master its because you are choosing to failover. Shutting down the master and restarting without failover leads to a situation where some sync rep commits are not on both master and standby. Making it easier to shutdown encourages that, which I don't wish to do, at this stage. I'm not sure I follow you. The proposed fast shutdown prevents the backends which have not received the ACK from the standby yet from returning the success to the client. So even after restarting the server, there is no data loss from client's point of view. If this is really unsafe, we *must* forbid immediate shutdown while backend is waiting for sync rep. Because immediate shutdown creates the same situation. What scenario are you concerned? We may decide that this is the right approach but I don't wish to rush into that decision. I want to have clear agreement about all the changes we want and what we call them if we do them. Zero data loss is ultimately about users having confidence in us, not about specific features. Our disagreements on this patch risk damaging that confidence, whoever is right/wrong. Same as above. I think that it's more problematic to leave the code as it is. Because smart/fast shutdown can make the server get stuck until immediate shutdown is requested. Regards, -- Fujii Masao NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
Sync Rep and shutdown Re: [HACKERS] Sync Rep v19
On Wed, Mar 9, 2011 at 2:14 PM, Jaime Casanova ja...@2ndquadrant.com wrote: On Tue, Mar 8, 2011 at 11:58 AM, Robert Haas robertmh...@gmail.com wrote: The fast shutdown handling seems fine, but why not just handle smart shutdown the same way? currently, smart shutdown means no new connections, wait until existing ones close normally. for consistency, it should behave the same for sync rep. Agreed. I think that user who wants to request smart shutdown expects all the existing connections to basically be closed normally by the client. So it doesn't seem to be good idea to forcibly close the connection and prevent the COMMIT from being returned in smart shutdown case. But I'm all ears for better suggestions. Anyway, we got the consensus about how fast shutdown should work with sync rep. So I created the patch. Please feel free to comment and commit the patch first ;) Regards, -- Fujii Masao NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center fast_shutdown_syncrep_v1.patch Description: Binary data -- Sent via pgsql-hackers mailing list (pgsql-hackers@postgresql.org) To make changes to your subscription: http://www.postgresql.org/mailpref/pgsql-hackers
