Re: [HACKERS] analyze after a database restore?
Attached is a committed patch to add a recommendation for ANALYZE after restore. It is a shame we only have vacuumdb -a to do analyze _and_ vacuum, and no analyze-only option. --- Tom Lane wrote: > mlw <[EMAIL PROTECTED]> writes: > > From an "ease of use" perspective, it would be one less step. > > There is something to be said for that. As Rod notes, this has been > considered and rejected before --- but I think that was back when > ANALYZE (a) could only be done as part of VACUUM, and (b) insisted on > scanning the whole table. The current implementation is vastly > lighter-weight than what we were looking at back then. Perhaps it's > time to reconsider. > > Although I suggested doing a single unconditional ANALYZE at the end > of the script, second thought leads me to think the per-table ANALYZE > (probably issued right after the table's data-load step) might be > better. That way you'd not have any side-effects on already-existing > tables in the database you are loading to. OTOH, that way would leave > the system catalogs un-analyzed, which might be bad. > > regards, tom lane > > ---(end of broadcast)--- > TIP 1: subscribe and unsubscribe commands go to [EMAIL PROTECTED] > -- Bruce Momjian| http://candle.pha.pa.us [EMAIL PROTECTED] | (610) 359-1001 + If your life is a hard drive, | 13 Roberts Road + Christ can be your backup.| Newtown Square, Pennsylvania 19073 Index: doc/src/sgml/backup.sgml === RCS file: /cvsroot/pgsql-server/doc/src/sgml/backup.sgml,v retrieving revision 2.24 diff -c -c -r2.24 backup.sgml *** doc/src/sgml/backup.sgml11 Nov 2002 20:14:02 - 2.24 --- doc/src/sgml/backup.sgml17 Mar 2003 23:58:37 - *** *** 126,131 --- 126,138 + Once restored, it is wise to run ANALYZE on each + database so the optimizer has useful statistics. You + can also run vacuumdb -a -z to ANALYZE all + databases. + + + The ability of pg_dump and psql to write to or read from pipes makes it possible to dump a database directly from one server to another, for example Index: doc/src/sgml/ref/pg_dump.sgml === RCS file: /cvsroot/pgsql-server/doc/src/sgml/ref/pg_dump.sgml,v retrieving revision 1.56 diff -c -c -r1.56 pg_dump.sgml *** doc/src/sgml/ref/pg_dump.sgml 13 Feb 2003 04:54:15 - 1.56 --- doc/src/sgml/ref/pg_dump.sgml 17 Mar 2003 23:58:38 - *** *** 650,655 --- 650,660 + + Once restored, it is wise to run ANALYZE on each + restored object so the optimizer has useful statistics. + + pg_dump has a few limitations: *** *** 682,687 --- 687,698 other output formats is not limited, except possibly by the operating system. + + +Once restored, it is wise to run ANALYZE on each +restored object so the optimizer has useful statistics. + + Index: doc/src/sgml/ref/pg_dumpall.sgml === RCS file: /cvsroot/pgsql-server/doc/src/sgml/ref/pg_dumpall.sgml,v retrieving revision 1.36 diff -c -c -r1.36 pg_dumpall.sgml *** doc/src/sgml/ref/pg_dumpall.sgml6 Jan 2003 18:53:24 - 1.36 --- doc/src/sgml/ref/pg_dumpall.sgml17 Mar 2003 23:58:38 - *** *** 258,267 pg_dumpall will need to connect several times to the PostgreSQL server. If password authentication is configured, it will ask for a password each time. In !that case it would be convenient to set up a password file. - But where is that password file documented? --- 258,274 pg_dumpall will need to connect several times to the PostgreSQL server. If password authentication is configured, it will ask for a password each time. In !that case it would be convenient to set up a .pgpass !password file. ! ! ! !Once restored, it is wise to run ANALYZE on each !database so the optimizer has useful statistics. You !can also run vacuumdb -a -z to ANALYZE all !databases. Index: doc/src/sgml/ref/pg_restore.sgml === RCS file: /cvsroot/pgsql-server/doc/src/sgml/ref/pg_restore.sgml,v retrieving revision 1.35 diff -c -c -r1.35 pg_restore.sgml *** doc/src/sgml/ref/pg_restore.sgml19 Jan 2003 00:13:31 - 1.35 --- doc/src/sgml/ref/pg_restore.sgml17 Mar 2003 23:58:47 - *** *** 589,594 --- 589,600 See also the documentation for details on limitations of pg_dump. + + +Once restored, it
Re: [HACKERS] analyze after a database restore?
> Although I suggested doing a single unconditional ANALYZE at the end > of the script, second thought leads me to think the per-table ANALYZE > (probably issued right after the table's data-load step) might be > better. That way you'd not have any side-effects on already-existing > tables in the database you are loading to. OTOH, that way would leave > the system catalogs un-analyzed, which might be bad. How about adding an ANALYZE SCHEMA pg_catalog; option :) Chris ---(end of broadcast)--- TIP 6: Have you searched our list archives? http://archives.postgresql.org
Re: [HACKERS] analyze after a database restore?
On Thu, Feb 27, 2003 at 03:12:36PM -0500, Tom Lane wrote: > Although I suggested doing a single unconditional ANALYZE at the end > of the script, second thought leads me to think the per-table ANALYZE > (probably issued right after the table's data-load step) might be > better. That way you'd not have any side-effects on already-existing > tables in the database you are loading to. OTOH, that way would leave > the system catalogs un-analyzed, which might be bad. Huh... is there a way to analyze a specific schema? Maybe that can solve the problem of system catalogs being left un-analyzed, by having pg_dump emit an "ANALYZE SCHEMA pg_catalog" or something. -- Alvaro Herrera () "La libertad es como el dinero; el que no la sabe emplear la pierde" (Alvarez) ---(end of broadcast)--- TIP 1: subscribe and unsubscribe commands go to [EMAIL PROTECTED]
Re: [HACKERS] analyze after a database restore?
On Thu, Feb 27, 2003 at 02:45:46PM -0500, mlw wrote: > > Are there any reasons why it should not be an option on pg_dump? I wonder whether that mightn't be the best answer. Maybe it should even be the default, and --noanalyse an option. I agree that from the point of view of simplifying administration, it'd be a nice addition. A -- Andrew Sullivan 204-4141 Yonge Street Liberty RMS Toronto, Ontario Canada <[EMAIL PROTECTED]> M2P 2A8 +1 416 646 3304 x110 ---(end of broadcast)--- TIP 1: subscribe and unsubscribe commands go to [EMAIL PROTECTED]
Re: [HACKERS] analyze after a database restore?
mlw <[EMAIL PROTECTED]> writes: > From an "ease of use" perspective, it would be one less step. There is something to be said for that. As Rod notes, this has been considered and rejected before --- but I think that was back when ANALYZE (a) could only be done as part of VACUUM, and (b) insisted on scanning the whole table. The current implementation is vastly lighter-weight than what we were looking at back then. Perhaps it's time to reconsider. Although I suggested doing a single unconditional ANALYZE at the end of the script, second thought leads me to think the per-table ANALYZE (probably issued right after the table's data-load step) might be better. That way you'd not have any side-effects on already-existing tables in the database you are loading to. OTOH, that way would leave the system catalogs un-analyzed, which might be bad. regards, tom lane ---(end of broadcast)--- TIP 1: subscribe and unsubscribe commands go to [EMAIL PROTECTED]
Re: [HACKERS] analyze after a database restore?
D'Arcy J.M. Cain wrote: On Thursday 27 February 2003 13:12, mlw wrote: Tom Lane wrote: A single ANALYZE at the end of the script would be sufficient. I'm not sure that pg_dump should do this automatically though. If you're not done restoring then it's mostly a waste of cycles, and how is pg_dump to know that? [...] From an "ease of use" perspective, it would be one less step. Why not have pg_dump emit a friendly reminder? The reminder won't work, because the backup may be happening in an automatic fashion, and anything but error messages will be lost. I dislike having to have an "expert" be present at the database "restore" phase of operation. Suppose a company loses the PG admin and a reasonably experienced person takes his or her place temporarily, This scenario happens all the time with all sorts of projects. A reasonably experienced person will be able to accomplish a DB restore but will probably not know about performing an analyze. Under the pressure of restoring after a crash on a live system, even a reasonably experienced PG admin may forget, hell I forgot and I've been using PG since 1997. The "correct" view of a database backup should be to include the statistics of the database as it existed at the time backup, these statistics are part of this state "snapshot" because the directly affect the operation of the database. I do not want to evoke the name of Larry's evil product, but it saves its statistics when the data is exported. Short of including the relevant statistics, there should be an option on pg_dump to emit an "ANALYZE;" at the end of a database dump. This will allow a "knowledgeable" admin to selectively add the vacuum so that someone possibly less qualified than he can do the restore. Does anyone disagree that a query's "explain" should look the same or better after a successful restore? From a product QA point of view, if a valid backup set, when restored, does not recreate the system in a state at least as efficient and workable as the system when it was backed up, you did not have a successful restore. Any QA department would rate this as a serious bug. Are there any reasons why it should not be an option on pg_dump? ---(end of broadcast)--- TIP 2: you can get off all lists at once with the unregister command (send "unregister YourEmailAddressHere" to [EMAIL PROTECTED])
Re: [HACKERS] analyze after a database restore?
On Thursday 27 February 2003 13:12, mlw wrote: > Tom Lane wrote: > >A single ANALYZE at the end of the script would be sufficient. I'm not > >sure that pg_dump should do this automatically though. If you're not > >done restoring then it's mostly a waste of cycles, and how is pg_dump to > >know that? > [...] > From an "ease of use" perspective, it would be one less step. Why not have pg_dump emit a friendly reminder? -- D'Arcy J.M. Cain <[EMAIL PROTECTED]|vex}.net> | Democracy is three wolves http://www.druid.net/darcy/| and a sheep voting on +1 416 425 1212 (DoD#0082)(eNTP) | what's for dinner. ---(end of broadcast)--- TIP 5: Have you checked our extensive FAQ? http://www.postgresql.org/users-lounge/docs/faq.html
Re: [HACKERS] analyze after a database restore?
Tom Lane wrote: mlw <[EMAIL PROTECTED]> writes: Should pg_dump appened an ANALYZE for each table? A single ANALYZE at the end of the script would be sufficient. I'm not sure that pg_dump should do this automatically though. If you're not done restoring then it's mostly a waste of cycles, and how is pg_dump to know that? I do note that the docs are rather stingy with this important bit of knowhow :-( Neither of the obvious places that I looked in (pg_dump reference page and admin guide's backup/restore chapter) mention the need to issue an ANALYZE after completing a restore. I'm pretty sure it is mentioned *somewhere* ;-) ... but it needs to be more prominent. While these are all comforting points, I *know* about analyze and I occasionally forget. It just seems like a nessisary step after restoring a backup. Conceptually, one could consider it just as important as an index, i.e. the system will perform poorly without it. From an "ease of use" perspective, it would be one less step. ---(end of broadcast)--- TIP 5: Have you checked our extensive FAQ? http://www.postgresql.org/users-lounge/docs/faq.html
Re: [HACKERS] analyze after a database restore?
On Thu, 2003-02-27 at 12:27, mlw wrote: > I just dumped and restored a rather large database, I upgraded from > 7.2.x to 7.3.x. When I went to test my application against the new > database, it was dog slow. It had all the indexes, and looked fine. > > Then it dawned on me, Doh! ANALYZE! > > Should pg_dump appened an ANALYZE for each table? > > On small tables, this shouldn't take too long. On large tables, you're > gonna have to do it anyway. I guess it could be an option as well. > > It just seems like on of the tasks that is required for a "restored" > database to work properly, and as such, should probably be specified in > the backup procedure. It's been debated before whether pg_dump should append ANALYZE to the end of the load script. It has always been determined that it shouldn't (see archives for arguments). However, an 'Auto-vacuum' process should watch stats and re-analyze the table when the larger of 30% or 1000 rows has been affected (inserts, or deletes mostly). That is probably a better solution overall. -- Rod Taylor <[EMAIL PROTECTED]> PGP Key: http://www.rbt.ca/rbtpub.asc signature.asc Description: This is a digitally signed message part
Re: [HACKERS] analyze after a database restore?
mlw <[EMAIL PROTECTED]> writes: > Should pg_dump appened an ANALYZE for each table? A single ANALYZE at the end of the script would be sufficient. I'm not sure that pg_dump should do this automatically though. If you're not done restoring then it's mostly a waste of cycles, and how is pg_dump to know that? I do note that the docs are rather stingy with this important bit of knowhow :-( Neither of the obvious places that I looked in (pg_dump reference page and admin guide's backup/restore chapter) mention the need to issue an ANALYZE after completing a restore. I'm pretty sure it is mentioned *somewhere* ;-) ... but it needs to be more prominent. regards, tom lane ---(end of broadcast)--- TIP 5: Have you checked our extensive FAQ? http://www.postgresql.org/users-lounge/docs/faq.html