Re: [Phono-L] Victor VE8-12X tonearm mounting bracket
Thanks for the definitive info, Jim! Of course wood is transparent to magnetic fields -- I hope I would've realized that without prompting once I've gotten past being intimidated by this whole process, haha. (Maybe not!) It's very helpful to know that they came with wooden shims originally, though -- that totally puts my mind to rest that this doesn't have to be considered a 'quick fix' kind of solution. I really want this thing to play the best it can for a long time. 😊 You know, I should've also realized coil vibrations are lost energy. I do a lot with speakers and turntables, and everything in those realms is all about management of mechanical energy. I guess I really need to just get over this whole 'big scary electric motors' thing once and for all. 😊 Thanks again! Robert From: Phono-L on behalf of Jim Nichol via Phono-L Sent: Tuesday, November 20, 2018 3:07 PM To: Antique Phonograph List Cc: Jim Nichol Subject: Re: [Phono-L] Victor VE8-12X tonearm mounting bracket No, Robert. Wooden wedges between the coils and the steel magnetic core do not cause any losses. They are transparent to magnetism. Also, the motor will be more efficient if the coil is NOT moving or vibrating. Movement wastes mechanical energy. When I worked in the industrial world, a transformer with a loud hum was almost always caused by the wooden wedges falling out. There are supposed to be wedges between the steel core and the windings in a transformer to prevent movement and hum. Jim Nichol On Nov 20, 2018, at 1:15 AM, Robert Wright via Phono-L mailto:phono-l@oldcrank.org>> wrote: Thank you, Mike! Hahaha, my phone's speech-to-text function butchers what I tell it so frequently that I read right through your 'mess' no problem. 😊 So if I stick popsicle sticks between the outer coil windings and the core, will any voltage be lost/wasted from anything being aligned differently than originally manufactured, or does that not make any real difference in this situation? I did try the plug in both polarities -- no change in hum volume. It has worked on plenty of 60s and 70s portable phonos I've had, though. Best, Robert From: Phono-L mailto:phono-l-boun...@oldcrank.org>> on behalf of Mike Stitt via Phono-L mailto:phono-l@oldcrank.org>> Sent: Monday, November 19, 2018 10:08 PM To: Antique Phonograph List Cc: Mike Stitt Subject: Re: [Phono-L] Victor VE8-12X tonearm mounting bracket Man my last email was a mess. Popsicle sticks can be used as shims to "tighten" up the coils. They tend to shrink. Glyptal is a red slushing type of paint that insulates and drys hard. It is common for use in re-insulating coils. The spray type isn't nearly as good as the brush on type. It shouldn't make a difference but you might try turning the plug around. If that should elimate the hum, test for voltage between the motor and a known ground. Before polarized plugs touching say a radio chassis and a water pipe would zap you, 115 volts. Mike Damn tablets! 😅 On Mon, Nov 19, 2018, 5:30 PM Mike Stitt mailto:smst...@gmail.com> wrote: Loose coils can cause a hum type of sound. More than likely the swab used was glyptal. If the coila are lose use popcycle sticks. Mike On Mon, Nov 19, 2018, 5:21 PM Leroy Barco via Phono-L mailto:phono-l@oldcrank.org> wrote: I once had an electric credenza with a bad hum in the motor. I found a small motor guy who diagnosed that it had “dried out “. He had a solution he swabbed on several times that permeated the windings and fixed the hum. I’m like Sgt. Schultz on the details. “I know nothing!” LeRoy On Mon, Nov 19, 2018 at 12:25 PM Ron L'Herault via Phono-L mailto:phono-l@oldcrank.org>> wrote: The Victor book gives some tips on reducing hum, such as checking the plate tightness, and adding felt between cabinet and motorboard. There are no circuit components other than switches.Have you checked with George Vollema for the tone arm bracket? I understand that Wyatt Marcus is doing really good Orth reproducer rebuilds. Ron L From: Phono-L [mailto:phono-l-boun...@oldcrank.org<mailto:phono-l-boun...@oldcrank.org>] On Behalf Of Robert Wright via Phono-L Sent: Sunday, November 18, 2018 9:03 PM To: Phono L Cc: Robert Wright Subject: [Phono-L] Victor VE8-12X tonearm mounting bracket Hey everyone, hope all is well with you folks! I need a whole new tonearm mounting bracket assembly for a Victor VE8-12X that I just got. This one is totally and utterly wrecked. Anyone know who's selling repros? Ron Sitko? JAS? Anyone have current contact info for a dealer who would have some? Also, has anyone rebuilt one of these electric platter motors? This one works great, but it has a really loud mechanical 60Hz hum. I want to replace any components in the circuit that I can, and also do
Re: [Phono-L] Victor VE8-12X tonearm mounting bracket
Robert, Thanks for your kind words. The coils should be tight on the iron coil. If the shims help or reduce it to tolerable levels you know what to do, M On Tue, Nov 20, 2018 at 9:52 AM Robert Wright via Phono-L < phono-l@oldcrank.org> wrote: > Thank you, Mike! Hahaha, my phone's speech-to-text function butchers what > I tell it so frequently that I read right through your 'mess' no problem. > 😊 > > > So if I stick popsicle sticks between the outer coil windings and the > core, will any voltage be lost/wasted from anything being aligned > differently than originally manufactured, or does that not make any real > difference in this situation? > > > I did try the plug in both polarities -- no change in hum volume. It has > worked on plenty of 60s and 70s portable phonos I've had, though. > > > > Best, > > Robert > > > -- > *From:* Phono-L on behalf of Mike Stitt > via Phono-L > *Sent:* Monday, November 19, 2018 10:08 PM > *To:* Antique Phonograph List > *Cc:* Mike Stitt > *Subject:* Re: [Phono-L] Victor VE8-12X tonearm mounting bracket > > Man my last email was a mess. > Popsicle sticks can be used as shims to "tighten" up the coils. They tend > to shrink. > Glyptal is a red slushing type of paint that insulates and drys hard. > It is common for use in re-insulating coils. The spray type isn't nearly > as good as the brush on type. > It shouldn't make a difference but you might try turning the plug around. > If that should elimate the hum, test for voltage between the motor and a > known ground. Before polarized plugs touching say a radio chassis and a > water pipe would zap you, 115 volts. > Mike > Damn tablets! 😅 > On Mon, Nov 19, 2018, 5:30 PM Mike Stitt > Loose coils can cause a hum type of sound. More than likely the swab used > was glyptal. If the coila are lose use popcycle sticks. > Mike > > On Mon, Nov 19, 2018, 5:21 PM Leroy Barco via Phono-L < > phono-l@oldcrank.org wrote: > > I once had an electric credenza with a bad hum in the motor. > I found a small motor guy who diagnosed that it had “dried out “. > He had a solution he swabbed on several times that permeated the windings > and fixed the hum. > > I’m like Sgt. Schultz on the details. “I know nothing!” > > LeRoy > On Mon, Nov 19, 2018 at 12:25 PM Ron L'Herault via Phono-L < > phono-l@oldcrank.org> wrote: > > The Victor book gives some tips on reducing hum, such as checking the > plate tightness, and adding felt between cabinet and motorboard. There are > no circuit components other than switches.Have you checked with George > Vollema for the tone arm bracket? I understand that Wyatt Marcus is doing > really good Orth reproducer rebuilds. > > > > Ron L > > > > *From:* Phono-L [mailto:phono-l-boun...@oldcrank.org] *On Behalf Of *Robert > Wright via Phono-L > *Sent:* Sunday, November 18, 2018 9:03 PM > *To:* Phono L > *Cc:* Robert Wright > *Subject:* [Phono-L] Victor VE8-12X tonearm mounting bracket > > > > Hey everyone, hope all is well with you folks! I need a whole new tonearm > mounting bracket assembly for a Victor VE8-12X that I just got. This one is > totally and utterly wrecked. Anyone know who's selling repros? Ron Sitko? > JAS? Anyone have current contact info for a dealer who would have some? > > > > Also, has anyone rebuilt one of these electric platter motors? This one > works great, but it has a really loud mechanical 60Hz hum. I want to > replace any components in the circuit that I can, and also do a full > cleaning and lube job, but I would really like to know what I'm getting > into first. > > > > And lastly, anyone have Walt's current info in case I want to have him > rebuild this reproducer? > > > > Thanks a million! > > Robert > ___ > Phono-L mailing list > http://phono-l.org > Unsubscribe: phono-l-unsubscr...@oldcrank.org > > ___ > Phono-L mailing list > http://phono-l.org > Unsubscribe: phono-l-unsubscr...@oldcrank.org > > ___ > Phono-L mailing list > http://phono-l.org > Unsubscribe: phono-l-unsubscr...@oldcrank.org ___ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org
Re: [Phono-L] Victor VE8-12X tonearm mounting bracket
No, Robert. Wooden wedges between the coils and the steel magnetic core do not cause any losses. They are transparent to magnetism. Also, the motor will be more efficient if the coil is NOT moving or vibrating. Movement wastes mechanical energy. When I worked in the industrial world, a transformer with a loud hum was almost always caused by the wooden wedges falling out. There are supposed to be wedges between the steel core and the windings in a transformer to prevent movement and hum. Jim Nichol > On Nov 20, 2018, at 1:15 AM, Robert Wright via Phono-L > wrote: > > Thank you, Mike! Hahaha, my phone's speech-to-text function butchers what I > tell it so frequently that I read right through your 'mess' no problem. 😊 > > So if I stick popsicle sticks between the outer coil windings and the core, > will any voltage be lost/wasted from anything being aligned differently than > originally manufactured, or does that not make any real difference in this > situation? > > I did try the plug in both polarities -- no change in hum volume. It has > worked on plenty of 60s and 70s portable phonos I've had, though. > > > Best, > Robert > > > From: Phono-L <mailto:phono-l-boun...@oldcrank.org>> on behalf of Mike Stitt via Phono-L > mailto:phono-l@oldcrank.org>> > Sent: Monday, November 19, 2018 10:08 PM > To: Antique Phonograph List > Cc: Mike Stitt > Subject: Re: [Phono-L] Victor VE8-12X tonearm mounting bracket > > Man my last email was a mess. > Popsicle sticks can be used as shims to "tighten" up the coils. They tend to > shrink. > Glyptal is a red slushing type of paint that insulates and drys hard. > It is common for use in re-insulating coils. The spray type isn't nearly as > good as the brush on type. > It shouldn't make a difference but you might try turning the plug around. > If that should elimate the hum, test for voltage between the motor and a > known ground. Before polarized plugs touching say a radio chassis and a water > pipe would zap you, 115 volts. > Mike > Damn tablets! 😅 > On Mon, Nov 19, 2018, 5:30 PM Mike Stitt <mailto:smst...@gmail.com> wrote: > Loose coils can cause a hum type of sound. More than likely the swab used was > glyptal. If the coila are lose use popcycle sticks. > Mike > > On Mon, Nov 19, 2018, 5:21 PM Leroy Barco via Phono-L <mailto:phono-l@oldcrank.org> wrote: > I once had an electric credenza with a bad hum in the motor. > I found a small motor guy who diagnosed that it had “dried out “. > He had a solution he swabbed on several times that permeated the windings and > fixed the hum. > > I’m like Sgt. Schultz on the details. “I know nothing!” > > LeRoy > On Mon, Nov 19, 2018 at 12:25 PM Ron L'Herault via Phono-L > mailto:phono-l@oldcrank.org>> wrote: > The Victor book gives some tips on reducing hum, such as checking the plate > tightness, and adding felt between cabinet and motorboard. There are no > circuit components other than switches.Have you checked with George > Vollema for the tone arm bracket? I understand that Wyatt Marcus is doing > really good Orth reproducer rebuilds. > > Ron L > > From: Phono-L [mailto:phono-l-boun...@oldcrank.org > <mailto:phono-l-boun...@oldcrank.org>] On Behalf Of Robert Wright via Phono-L > Sent: Sunday, November 18, 2018 9:03 PM > To: Phono L > Cc: Robert Wright > Subject: [Phono-L] Victor VE8-12X tonearm mounting bracket > > Hey everyone, hope all is well with you folks! I need a whole new tonearm > mounting bracket assembly for a Victor VE8-12X that I just got. This one is > totally and utterly wrecked. Anyone know who's selling repros? Ron Sitko? > JAS? Anyone have current contact info for a dealer who would have some? > > Also, has anyone rebuilt one of these electric platter motors? This one works > great, but it has a really loud mechanical 60Hz hum. I want to replace any > components in the circuit that I can, and also do a full cleaning and lube > job, but I would really like to know what I'm getting into first. > > And lastly, anyone have Walt's current info in case I want to have him > rebuild this reproducer? > > Thanks a million! > Robert > ___ > Phono-L mailing list > http://phono-l.org <http://phono-l.org/> > Unsubscribe: phono-l-unsubscr...@oldcrank.org > <mailto:phono-l-unsubscr...@oldcrank.org>___ > Phono-L mailing list > http://phono-l.org <http://phono-l.org/> > Unsubscribe: phono-l-unsubscr...@oldcrank.org > <mailto:phono-l-unsubscr...@oldcrank.org>___ > Phono-L mailing list > http://phono-l.org <http://phono-l.org/> > Unsubscribe: phono-l-unsubscr...@oldcrank.org > <mailto:phono-l-unsubscr...@oldcrank.org> ___ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org
Re: [Phono-L] Victor VE8-12X tonearm mounting bracket
Thanks, LeRoy! This was something I wouldn't have ever thought of -- that I might find a small motor guy locally. I tend to think of phono stuff as so specialized that no one much knows anything about it but our community, but the truth is that it's just made of parts, some of which could be used for any number of things! Best, Robert From: Phono-L on behalf of Leroy Barco via Phono-L Sent: Monday, November 19, 2018 1:50 PM To: Antique Phonograph List Cc: Leroy Barco Subject: Re: [Phono-L] Victor VE8-12X tonearm mounting bracket I once had an electric credenza with a bad hum in the motor. I found a small motor guy who diagnosed that it had “dried out “. He had a solution he swabbed on several times that permeated the windings and fixed the hum. I’m like Sgt. Schultz on the details. “I know nothing!” LeRoy On Mon, Nov 19, 2018 at 12:25 PM Ron L'Herault via Phono-L mailto:phono-l@oldcrank.org>> wrote: The Victor book gives some tips on reducing hum, such as checking the plate tightness, and adding felt between cabinet and motorboard. There are no circuit components other than switches.Have you checked with George Vollema for the tone arm bracket? I understand that Wyatt Marcus is doing really good Orth reproducer rebuilds. Ron L From: Phono-L [mailto:phono-l-boun...@oldcrank.org<mailto:phono-l-boun...@oldcrank.org>] On Behalf Of Robert Wright via Phono-L Sent: Sunday, November 18, 2018 9:03 PM To: Phono L Cc: Robert Wright Subject: [Phono-L] Victor VE8-12X tonearm mounting bracket Hey everyone, hope all is well with you folks! I need a whole new tonearm mounting bracket assembly for a Victor VE8-12X that I just got. This one is totally and utterly wrecked. Anyone know who's selling repros? Ron Sitko? JAS? Anyone have current contact info for a dealer who would have some? Also, has anyone rebuilt one of these electric platter motors? This one works great, but it has a really loud mechanical 60Hz hum. I want to replace any components in the circuit that I can, and also do a full cleaning and lube job, but I would really like to know what I'm getting into first. And lastly, anyone have Walt's current info in case I want to have him rebuild this reproducer? Thanks a million! Robert ___ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org<mailto:phono-l-unsubscr...@oldcrank.org> ___ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org
Re: [Phono-L] Victor VE8-12X tonearm mounting bracket
Thank you, Mike! Hahaha, my phone's speech-to-text function butchers what I tell it so frequently that I read right through your 'mess' no problem. 😊 So if I stick popsicle sticks between the outer coil windings and the core, will any voltage be lost/wasted from anything being aligned differently than originally manufactured, or does that not make any real difference in this situation? I did try the plug in both polarities -- no change in hum volume. It has worked on plenty of 60s and 70s portable phonos I've had, though. Best, Robert From: Phono-L on behalf of Mike Stitt via Phono-L Sent: Monday, November 19, 2018 10:08 PM To: Antique Phonograph List Cc: Mike Stitt Subject: Re: [Phono-L] Victor VE8-12X tonearm mounting bracket Man my last email was a mess. Popsicle sticks can be used as shims to "tighten" up the coils. They tend to shrink. Glyptal is a red slushing type of paint that insulates and drys hard. It is common for use in re-insulating coils. The spray type isn't nearly as good as the brush on type. It shouldn't make a difference but you might try turning the plug around. If that should elimate the hum, test for voltage between the motor and a known ground. Before polarized plugs touching say a radio chassis and a water pipe would zap you, 115 volts. Mike Damn tablets! 😅 On Mon, Nov 19, 2018, 5:30 PM Mike Stitt mailto:smst...@gmail.com> wrote: Loose coils can cause a hum type of sound. More than likely the swab used was glyptal. If the coila are lose use popcycle sticks. Mike On Mon, Nov 19, 2018, 5:21 PM Leroy Barco via Phono-L mailto:phono-l@oldcrank.org> wrote: I once had an electric credenza with a bad hum in the motor. I found a small motor guy who diagnosed that it had “dried out “. He had a solution he swabbed on several times that permeated the windings and fixed the hum. I’m like Sgt. Schultz on the details. “I know nothing!” LeRoy On Mon, Nov 19, 2018 at 12:25 PM Ron L'Herault via Phono-L mailto:phono-l@oldcrank.org>> wrote: The Victor book gives some tips on reducing hum, such as checking the plate tightness, and adding felt between cabinet and motorboard. There are no circuit components other than switches.Have you checked with George Vollema for the tone arm bracket? I understand that Wyatt Marcus is doing really good Orth reproducer rebuilds. Ron L From: Phono-L [mailto:phono-l-boun...@oldcrank.org<mailto:phono-l-boun...@oldcrank.org>] On Behalf Of Robert Wright via Phono-L Sent: Sunday, November 18, 2018 9:03 PM To: Phono L Cc: Robert Wright Subject: [Phono-L] Victor VE8-12X tonearm mounting bracket Hey everyone, hope all is well with you folks! I need a whole new tonearm mounting bracket assembly for a Victor VE8-12X that I just got. This one is totally and utterly wrecked. Anyone know who's selling repros? Ron Sitko? JAS? Anyone have current contact info for a dealer who would have some? Also, has anyone rebuilt one of these electric platter motors? This one works great, but it has a really loud mechanical 60Hz hum. I want to replace any components in the circuit that I can, and also do a full cleaning and lube job, but I would really like to know what I'm getting into first. And lastly, anyone have Walt's current info in case I want to have him rebuild this reproducer? Thanks a million! Robert ___ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org<mailto:phono-l-unsubscr...@oldcrank.org> ___ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org<mailto:phono-l-unsubscr...@oldcrank.org> ___ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org
Re: [Phono-L] Victor VE8-12X tonearm mounting bracket
George Vollema is still reachable through victr...@triton.net, Robert. You may not even have to remove the back to unplug the motor. It’s been a while. I don’t remember for sure. This list and maybe some of the folks on the various Face Book pages are still your best resource 8-) I like that popsicle stick idea. I may try it on my Credenza motor. Ron From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Robert Wright via Phono-L Sent: Monday, November 19, 2018 2:37 PM To: Antique Phonograph List Cc: Robert Wright Subject: Re: [Phono-L] Victor VE8-12X tonearm mounting bracket Thank you, Ron! I'll check with George right now if I can find his current contact info. 😊 Is there anything more to accessing the motor than simply removing the back, unpugging the first AC junction, removing the platter, unscrewing the plinth/base board screws and lifting the thing straight up out of the cabinet? Are there any resources regarding this operation online that I could peruse? Best as always, Robert _ From: Phono-L on behalf of Ron L'Herault via Phono-L Sent: Monday, November 19, 2018 1:24 PM To: 'Antique Phonograph List' Cc: Ron L'Herault Subject: Re: [Phono-L] Victor VE8-12X tonearm mounting bracket The Victor book gives some tips on reducing hum, such as checking the plate tightness, and adding felt between cabinet and motorboard. There are no circuit components other than switches.Have you checked with George Vollema for the tone arm bracket? I understand that Wyatt Marcus is doing really good Orth reproducer rebuilds. Ron L From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Robert Wright via Phono-L Sent: Sunday, November 18, 2018 9:03 PM To: Phono L Cc: Robert Wright Subject: [Phono-L] Victor VE8-12X tonearm mounting bracket Hey everyone, hope all is well with you folks! I need a whole new tonearm mounting bracket assembly for a Victor VE8-12X that I just got. This one is totally and utterly wrecked. Anyone know who's selling repros? Ron Sitko? JAS? Anyone have current contact info for a dealer who would have some? Also, has anyone rebuilt one of these electric platter motors? This one works great, but it has a really loud mechanical 60Hz hum. I want to replace any components in the circuit that I can, and also do a full cleaning and lube job, but I would really like to know what I'm getting into first. And lastly, anyone have Walt's current info in case I want to have him rebuild this reproducer? Thanks a million! Robert ___ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org
Re: [Phono-L] Victor VE8-12X tonearm mounting bracket
Thank you, Ron! I'll check with George right now if I can find his current contact info. 😊 Is there anything more to accessing the motor than simply removing the back, unpugging the first AC junction, removing the platter, unscrewing the plinth/base board screws and lifting the thing straight up out of the cabinet? Are there any resources regarding this operation online that I could peruse? Best as always, Robert From: Phono-L on behalf of Ron L'Herault via Phono-L Sent: Monday, November 19, 2018 1:24 PM To: 'Antique Phonograph List' Cc: Ron L'Herault Subject: Re: [Phono-L] Victor VE8-12X tonearm mounting bracket The Victor book gives some tips on reducing hum, such as checking the plate tightness, and adding felt between cabinet and motorboard. There are no circuit components other than switches.Have you checked with George Vollema for the tone arm bracket? I understand that Wyatt Marcus is doing really good Orth reproducer rebuilds. Ron L From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Robert Wright via Phono-L Sent: Sunday, November 18, 2018 9:03 PM To: Phono L Cc: Robert Wright Subject: [Phono-L] Victor VE8-12X tonearm mounting bracket Hey everyone, hope all is well with you folks! I need a whole new tonearm mounting bracket assembly for a Victor VE8-12X that I just got. This one is totally and utterly wrecked. Anyone know who's selling repros? Ron Sitko? JAS? Anyone have current contact info for a dealer who would have some? Also, has anyone rebuilt one of these electric platter motors? This one works great, but it has a really loud mechanical 60Hz hum. I want to replace any components in the circuit that I can, and also do a full cleaning and lube job, but I would really like to know what I'm getting into first. And lastly, anyone have Walt's current info in case I want to have him rebuild this reproducer? Thanks a million! Robert ___ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org
Re: [Phono-L] Victor VE8-12X tonearm mounting bracket
Man my last email was a mess. Popsicle sticks can be used as shims to "tighten" up the coils. They tend to shrink. Glyptal is a red slushing type of paint that insulates and drys hard. It is common for use in re-insulating coils. The spray type isn't nearly as good as the brush on type. It shouldn't make a difference but you might try turning the plug around. If that should elimate the hum, test for voltage between the motor and a known ground. Before polarized plugs touching say a radio chassis and a water pipe would zap you, 115 volts. Mike Damn tablets! 😅 On Mon, Nov 19, 2018, 5:30 PM Mike Stitt Loose coils can cause a hum type of sound. More than likely the swab used > was glyptal. If the coila are lose use popcycle sticks. > Mike > > On Mon, Nov 19, 2018, 5:21 PM Leroy Barco via Phono-L < > phono-l@oldcrank.org wrote: > >> I once had an electric credenza with a bad hum in the motor. >> I found a small motor guy who diagnosed that it had “dried out “. >> He had a solution he swabbed on several times that permeated the windings >> and fixed the hum. >> >> I’m like Sgt. Schultz on the details. “I know nothing!” >> >> LeRoy >> On Mon, Nov 19, 2018 at 12:25 PM Ron L'Herault via Phono-L < >> phono-l@oldcrank.org> wrote: >> >>> The Victor book gives some tips on reducing hum, such as checking the >>> plate tightness, and adding felt between cabinet and motorboard. There are >>> no circuit components other than switches.Have you checked with George >>> Vollema for the tone arm bracket? I understand that Wyatt Marcus is doing >>> really good Orth reproducer rebuilds. >>> >>> >>> >>> Ron L >>> >>> >>> >>> *From:* Phono-L [mailto:phono-l-boun...@oldcrank.org] *On Behalf Of *Robert >>> Wright via Phono-L >>> *Sent:* Sunday, November 18, 2018 9:03 PM >>> *To:* Phono L >>> *Cc:* Robert Wright >>> *Subject:* [Phono-L] Victor VE8-12X tonearm mounting bracket >>> >>> >>> >>> Hey everyone, hope all is well with you folks! I need a whole new >>> tonearm mounting bracket assembly for a Victor VE8-12X that I just got. >>> This one is totally and utterly wrecked. Anyone know who's selling repros? >>> Ron Sitko? JAS? Anyone have current contact info for a dealer who would >>> have some? >>> >>> >>> >>> Also, has anyone rebuilt one of these electric platter motors? This one >>> works great, but it has a really loud mechanical 60Hz hum. I want to >>> replace any components in the circuit that I can, and also do a full >>> cleaning and lube job, but I would really like to know what I'm getting >>> into first. >>> >>> >>> >>> And lastly, anyone have Walt's current info in case I want to have him >>> rebuild this reproducer? >>> >>> >>> >>> Thanks a million! >>> >>> Robert >>> ___ >>> Phono-L mailing list >>> http://phono-l.org >>> Unsubscribe: phono-l-unsubscr...@oldcrank.org >> >> ___ >> Phono-L mailing list >> http://phono-l.org >> Unsubscribe: phono-l-unsubscr...@oldcrank.org > > ___ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org
Re: [Phono-L] Victor VE8-12X tonearm mounting bracket
Loose coils can cause a hum type of sound. More than likely the swab used was glyptal. If the coila are lose use popcycle sticks. Mike On Mon, Nov 19, 2018, 5:21 PM Leroy Barco via Phono-L I once had an electric credenza with a bad hum in the motor. > I found a small motor guy who diagnosed that it had “dried out “. > He had a solution he swabbed on several times that permeated the windings > and fixed the hum. > > I’m like Sgt. Schultz on the details. “I know nothing!” > > LeRoy > On Mon, Nov 19, 2018 at 12:25 PM Ron L'Herault via Phono-L < > phono-l@oldcrank.org> wrote: > >> The Victor book gives some tips on reducing hum, such as checking the >> plate tightness, and adding felt between cabinet and motorboard. There are >> no circuit components other than switches.Have you checked with George >> Vollema for the tone arm bracket? I understand that Wyatt Marcus is doing >> really good Orth reproducer rebuilds. >> >> >> >> Ron L >> >> >> >> *From:* Phono-L [mailto:phono-l-boun...@oldcrank.org] *On Behalf Of *Robert >> Wright via Phono-L >> *Sent:* Sunday, November 18, 2018 9:03 PM >> *To:* Phono L >> *Cc:* Robert Wright >> *Subject:* [Phono-L] Victor VE8-12X tonearm mounting bracket >> >> >> >> Hey everyone, hope all is well with you folks! I need a whole new tonearm >> mounting bracket assembly for a Victor VE8-12X that I just got. This one is >> totally and utterly wrecked. Anyone know who's selling repros? Ron Sitko? >> JAS? Anyone have current contact info for a dealer who would have some? >> >> >> >> Also, has anyone rebuilt one of these electric platter motors? This one >> works great, but it has a really loud mechanical 60Hz hum. I want to >> replace any components in the circuit that I can, and also do a full >> cleaning and lube job, but I would really like to know what I'm getting >> into first. >> >> >> >> And lastly, anyone have Walt's current info in case I want to have him >> rebuild this reproducer? >> >> >> >> Thanks a million! >> >> Robert >> ___ >> Phono-L mailing list >> http://phono-l.org >> Unsubscribe: phono-l-unsubscr...@oldcrank.org > > ___ > Phono-L mailing list > http://phono-l.org > Unsubscribe: phono-l-unsubscr...@oldcrank.org ___ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org
Re: [Phono-L] Victor VE8-12X tonearm mounting bracket
I once had an electric credenza with a bad hum in the motor. I found a small motor guy who diagnosed that it had “dried out “. He had a solution he swabbed on several times that permeated the windings and fixed the hum. I’m like Sgt. Schultz on the details. “I know nothing!” LeRoy On Mon, Nov 19, 2018 at 12:25 PM Ron L'Herault via Phono-L < phono-l@oldcrank.org> wrote: > The Victor book gives some tips on reducing hum, such as checking the > plate tightness, and adding felt between cabinet and motorboard. There are > no circuit components other than switches.Have you checked with George > Vollema for the tone arm bracket? I understand that Wyatt Marcus is doing > really good Orth reproducer rebuilds. > > > > Ron L > > > > *From:* Phono-L [mailto:phono-l-boun...@oldcrank.org] *On Behalf Of *Robert > Wright via Phono-L > *Sent:* Sunday, November 18, 2018 9:03 PM > *To:* Phono L > *Cc:* Robert Wright > *Subject:* [Phono-L] Victor VE8-12X tonearm mounting bracket > > > > Hey everyone, hope all is well with you folks! I need a whole new tonearm > mounting bracket assembly for a Victor VE8-12X that I just got. This one is > totally and utterly wrecked. Anyone know who's selling repros? Ron Sitko? > JAS? Anyone have current contact info for a dealer who would have some? > > > > Also, has anyone rebuilt one of these electric platter motors? This one > works great, but it has a really loud mechanical 60Hz hum. I want to > replace any components in the circuit that I can, and also do a full > cleaning and lube job, but I would really like to know what I'm getting > into first. > > > > And lastly, anyone have Walt's current info in case I want to have him > rebuild this reproducer? > > > > Thanks a million! > > Robert > ___ > Phono-L mailing list > http://phono-l.org > Unsubscribe: phono-l-unsubscr...@oldcrank.org ___ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org
Re: [Phono-L] Victor VE8-12X tonearm mounting bracket
The Victor book gives some tips on reducing hum, such as checking the plate tightness, and adding felt between cabinet and motorboard. There are no circuit components other than switches.Have you checked with George Vollema for the tone arm bracket? I understand that Wyatt Marcus is doing really good Orth reproducer rebuilds. Ron L From: Phono-L [mailto:phono-l-boun...@oldcrank.org] On Behalf Of Robert Wright via Phono-L Sent: Sunday, November 18, 2018 9:03 PM To: Phono L Cc: Robert Wright Subject: [Phono-L] Victor VE8-12X tonearm mounting bracket Hey everyone, hope all is well with you folks! I need a whole new tonearm mounting bracket assembly for a Victor VE8-12X that I just got. This one is totally and utterly wrecked. Anyone know who's selling repros? Ron Sitko? JAS? Anyone have current contact info for a dealer who would have some? Also, has anyone rebuilt one of these electric platter motors? This one works great, but it has a really loud mechanical 60Hz hum. I want to replace any components in the circuit that I can, and also do a full cleaning and lube job, but I would really like to know what I'm getting into first. And lastly, anyone have Walt's current info in case I want to have him rebuild this reproducer? Thanks a million! Robert ___ Phono-L mailing list http://phono-l.org Unsubscribe: phono-l-unsubscr...@oldcrank.org
