Re: [PHP-DB] last insert ID
hi you can use the mysql function LAST_INSERT_ID() heres the info from the manual: http://dev.mysql.com/doc/mysql/en/ODBC_and_last_insert_id.html hope that helps eoghan Nathan Mealey wrote: Is there a PEAR::DB equivalent to the mysql_insert_id()? I can't figure out how to get the primary key ID from the last insert query, without doing a second query (which seems ridiculous). On that same note, are the mysql_insert_id() and pg_last_oid() equivalent? I thought they were, but when I used pg_last_oid() I got some crazy number that was definitely not the last primary key ID. Thanks, Nathan -- Nathan Mealey Director of Operations Cycle-Smart, Inc. P.O. Box 1482 Northampton, MA 01061-1482 [EMAIL PROTECTED] (413) 210-7984 (512) 681-7043 Fax -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP-DB] Re: Approved
Please see the attached file for details. Unknown command - PLEASE. Try HELP. Summary of resource utilization --- CPU time:0.000 sec Overhead CPU:0.000 sec CPU model: 4-CPU 700MHz Pentium III Xeon 1M (2048M) Job origin: [EMAIL PROTECTED] -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP-DB] [SPAM?] [PHP-DB] Re: Approved
This mail is probably spam. The original message has been attached along with this report, so you can recognize or block similar unwanted mail in future. See http://spamassassin.org/tag/ for more details. Content preview: Please see the attached file for details. Unknown command - PLEASE. Try HELP. Summary of resource utilization CPU time: 0.000 sec Overhead CPU: 0.000 sec CPU model: 4-CPU 700MHz Pentium III Xeon 1M (2048M) Job origin: [EMAIL PROTECTED] [...] Content analysis details: (5.20 points, 5 required) SUBJ_HAS_SPACES(1.7 points) Subject contains lots of white space RCVD_IN_OSIRUSOFT_COM (0.6 points) RBL: Received via a relay in relays.osirusoft.com [RBL check: found 4.131.92.216.relays.osirusoft.com.] X_OSIRU_OPEN_RELAY (2.9 points) RBL: DNSBL: sender is Confirmed Open Relay ---BeginMessage--- Please see the attached file for details. Unknown command - PLEASE. Try HELP. Summary of resource utilization --- CPU time:0.000 sec Overhead CPU:0.000 sec CPU model: 4-CPU 700MHz Pentium III Xeon 1M (2048M) Job origin: [EMAIL PROTECTED] -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php ---End Message--- -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP-DB] Re: That movie
Please see the attached file for details. Unknown command - PLEASE. Try HELP. Summary of resource utilization --- CPU time:0.000 sec Overhead CPU:0.000 sec CPU model: 4-CPU 700MHz Pentium III Xeon 1M (2048M) Job origin: [EMAIL PROTECTED] -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP-DB] [SPAM?] [PHP-DB] Re: That movie
This mail is probably spam. The original message has been attached along with this report, so you can recognize or block similar unwanted mail in future. See http://spamassassin.org/tag/ for more details. Content preview: Please see the attached file for details. Unknown command - PLEASE. Try HELP. Summary of resource utilization CPU time: 0.000 sec Overhead CPU: 0.000 sec CPU model: 4-CPU 700MHz Pentium III Xeon 1M (2048M) Job origin: [EMAIL PROTECTED] [...] Content analysis details: (5.20 points, 5 required) SUBJ_HAS_SPACES(1.7 points) Subject contains lots of white space RCVD_IN_OSIRUSOFT_COM (0.6 points) RBL: Received via a relay in relays.osirusoft.com [RBL check: found 4.131.92.216.relays.osirusoft.com.] X_OSIRU_OPEN_RELAY (2.9 points) RBL: DNSBL: sender is Confirmed Open Relay ---BeginMessage--- Please see the attached file for details. Unknown command - PLEASE. Try HELP. Summary of resource utilization --- CPU time:0.000 sec Overhead CPU:0.000 sec CPU model: 4-CPU 700MHz Pentium III Xeon 1M (2048M) Job origin: [EMAIL PROTECTED] -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php ---End Message--- -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP-DB] Your details
See the attached file for details -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
RE: [PHP-DB] redirect
At 04:33 PM 3/1/2003 -0500, Jeremi Bergman wrote:
www.php.net/round
find the answer there, you will :-)
~kurth
Nevermind, I found the answer, and why it wasn't working. Now I was
wondering how I can format a number to be a currency? Like if
$totalprice = 14.343 have it print 14.34.
thanks
-Original Message-
From: Jeremi Bergman [mailto:[EMAIL PROTECTED]
Sent: Saturday, March 01, 2003 2:13 PM
To: [EMAIL PROTECTED]
Subject: [PHP-DB] redirect
How can I redirect a user to a specific page if they are already
authenticated?
if ($SESSION_Authenticated) { //code here to redirect; }
thanks
--
PHP Database Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
--
PHP Database Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
--
PHP Database Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP-DB]
At 03:40 PM 2/12/2003 +0200, nikos wrote: I bet that google does... or the search engine at mysql.com does ~kurth Hi List! I'm trying to Drop a Table and aI get an error as follows: Error on delete of './horceng/oikology.MYI' (Errcode: 13) Does anybody know what is the error 13? Thanks Qbit ÃáôóÞò Íßêïò - Gatsis Nikos Web developer tel.: 2108256721 - 2108256722 fax: 2108256712 email: [EMAIL PROTECTED] http://www.qbit.gr -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP-DB] hotlink MySQL
At 07:55 PM 10/15/2002 +0200, Seabird wrote: yes - just specify the hostname that your mysql DB resides on. And make sure that your mysql users is allowed to connect from the host that your APP or page or whatever is on. ~kurth Is it possible to hotlink a MySQL database? my site location is different then my MySQL location. (or at least a site). Is it possible to use the database for both sites or should I set up the database at both locations? The reason for asking is that one of the locations doesn't provide MySQL DB's anymore (max number of DB's is limited) Pls let me know if this is possible, and if so, how. Thanx, Jacco http://seabird.coolfreepage.com/main2.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP-DB] https post via php
Hello,
I am attempting to POST to a https://whatever.url.com server and return
the result from the server into the script without the user knowing using
a php script. I can not use CURL becuase the shared server I have hosting
this site was not compiled -with-curl. I downloaded HTTP_POST PHP script
from: http://px.sklar.com/code.html?code_id=313. Here is my code that I
am using to call the functions:
?php
require('classes2.php');
//instantiate class http_post
$a = new http_post;
//define variables
$a-set_server(onlinechecks.interceptcorporation.com);
$a-set_port(443);
$a-set_file(/icolc/short.cgi);
$a-set_action(https://onlinechecks.interceptcorporation.com/icolc/short.cgi;);
$a-set_enctype(application/x-www-form-urlencoded);
$a-set_element(array(MEN = 789,MPA = 456, MID = 7015,CRO
= 123456780,CAC = 123123123,
CPH = 17015551212,PAM = 12.34));
$a-set_timeout(20);
$a-show_post();
$a-send($display=1);
?
Here is the result returned from the browser:
Bad Request
Your browser sent a request that this server could not understand.
Reason: You're speaking plain HTTP to an SSL-enabled server port.
Instead use the HTTPS scheme to access this URL, please.
Hint: https://206.11.164.21/
Apache/1.3.20 Server at 206.11.164.21 Port 80
Does anyone have any ideas?
--
PHP Database Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
--
PHP Database Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
[PHP-DB] https post using php
Hello,
I am attempting to POST to a https://whatever.url.com server and return
the result from the server into the script without the user knowing using
a php script. I can not use CURL becuase the shared server I have hosting
this site was not compiled -with-curl. I downloaded HTTP_POST PHP script
from: http://px.sklar.com/code.html?code_id=313. Here is my code that I
am using to call the functions:
?php
require('classes2.php');
//instantiate class http_post
$a = new http_post;
//define variables
$a-set_server(onlinechecks.interceptcorporation.com);
$a-set_port(443);
$a-set_file(/icolc/short.cgi);
$a-set_action(https://onlinechecks.interceptcorporation.com/icolc/short.cgi;);
$a-set_enctype(application/x-www-form-urlencoded);
$a-set_element(array(MEN = 789,MPA = 456, MID = 7015,CRO
= 123456780,CAC = 123123123,
CPH = 17015551212,PAM = 12.34));
$a-set_timeout(20);
$a-show_post();
$a-send($display=1);
?
Here is the result returned from the browser:
Bad Request
Your browser sent a request that this server could not understand.
Reason: You're speaking plain HTTP to an SSL-enabled server port.
Instead use the HTTPS scheme to access this URL, please.
Hint: https://206.11.164.21/
Apache/1.3.20 Server at 206.11.164.21 Port 80
Does anyone have any ideas?
--
PHP Database Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
[PHP-DB] post to a url and return to same page
Hello, I am trying to post to a URL and return to the same page with the result and or error messages. The shared server that is hosting this site was not compiled with CURL. Is there an alternative way to post a form to an alternate url and return to the same page without having to rely on the alternate URL's server? Regards, Adrian -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re(2): Re(2): Re(2): [PHP-DB] Fatal Error using mysql_connect()
[EMAIL PROTECTED] writes: I'm confused as to what exactly you have done here. You say it compiled without any errors using -with-mysql=/usr But then your config from phpinfo() shows: --with-mysql=shared My advice is to do a clean installation: delete your current php src directory, extract the php tarball into a new directory then run configure make stop webserver make install restart webserver -- Jason Wong - Gremlins Associates - www.gremlins.com.hk Jason, I just deleted the current php src directory and extracted a new downloaded version 4.06 from PHP.NET. I did the following: attempt 1.) ./configure --with-mysql=/usr/lib/mysql result 1.) configure: error: Cannot find header files under /usr/lib/mysql attempt 2.) ./configure --with-mysql=/usr/include/mysql result 2.) configure: error: Cannot find header files under /usr/include/mysql attempt 3.) ./configure --with-mysql=/usr result 3.) everything will compile find except that the configure command from phpinfo() reads: [SNIP] --with-mysql=shared' ' I am not sure where to point --with-mysql=[DIR]. How do I know I am pointing it to the correct directory? Regards, Adrian -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP-DB] Fatal Error using mysql_connect()
Hello,
I am receiving a fatal error on a php page:
Fatal error: Call to undefined function: mysql_connect() in
/www/meyercousa/pages/view_data.php on line 13
My syntax on line 13 is: $db = mysql_connect('localhost', 'username',
'password');
Anyone have any ideas?
Regards,
Adrian Mcmanus
IT Director
[EMAIL PROTECTED]
--
PHP Database Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Re(2): Re(2): [PHP-DB] Fatal Error using mysql_connect()
[EMAIL PROTECTED] writes: Try: -with-mysql=/usr -- Jason Wong - Gremlins Associates - www.gremlins.com.hk /* Absence diminishes mediocre passions and increases great ones, as the wind blows out candles and fans fires. -- La Rochefoucauld */ -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php It compiled without any errors using -with-mysql=/usr However I still receive an error while trying to connect to my mysql database: Fatal error: Call to undefined function: mysql_connect() in /www/meyercousa/pages/view_data.php on line 13 I have pasted my configuration from phpinfo(). Hope this helps './configure' 'i386-redhat-linux' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--prefix=/usr' '--with-config-file-path=/etc' '--enable-force-cgi-redirect' '--disable-debug' '--enable-pic' '--disable-rpath' '--enable-inline-optimization' '--with-bz2' '--with-curl' '--with-db3' '--with-dom=/usr' '--with-exec-dir=/usr/bin' '--with-freetype-dir=/usr' '--with-gd' '--with-gdbm' '--with-gettext' '--with-gmp' '--with-iconv' '--with-jpeg-dir=/usr' '--with-mm' '--with-openssl' '--with-png' '--with-pspell' '--with-regex=system' '--with-ttf' '--with-xml' '--with-expat-dir=/usr' '--with-zlib' '--with-layout=GNU' '--enable-bcmath' '--enable-debugger' '--enable-ftp' '--enable-magic-quotes' '--enable-safe-mode' '--enable-sockets' '--enable-sysvsem' '--enable-sysvshm' '--enable-track-vars' '--enable-trans-sid' '--enable-yp' '--enable-wddx' '--without-oci8' '--with-imap=shared' '--with-imap-ssl' '--with-kerberos=/usr/kerberos' '--with-ldap=shared' '--with-mysql=shared' '--with-pgsql=shared' '--with-unixODBC=shared' '--with-apxs=/usr/sbin/apxs' -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
[PHP-DB] compiling php for mysql on linux
Hello, I am still recieving errors when I try to connect to my MYSQL database using php. Here is the error that is generated on the page: Fatal error: Call to undefined function: mysql_connect() in /www/meyercousa/pages/view_data.php on line 13 As instructed from a previous post I recompiled php using the following commands: ./configure --with-mysql=/usr/lib/mysql (recieved the following error: configure: error: Cannot find header files under /usr/include/mysql) ./configure --with-mysql=/usr/include/mysql (same error) ./configure --with-mysql=/usr (as far as I can tell everything has compiled ok except I still recieve the following error: Fatal error: Call to undefined function: mysql_connect() in /www/meyercousa/pages/view_data.php on line 13) I have pasted the configuration command: './configure' 'i386-redhat-linux' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--prefix=/usr' '--with-config-file-path=/etc' '--enable-force-cgi-redirect' '--disable-debug' '--enable-pic' '--disable-rpath' '--enable-inline-optimization' '--with-bz2' '--with-curl' '--with-db3' '--with-dom=/usr' '--with-exec-dir=/usr/bin' '--with-freetype-dir=/usr' '--with-gd' '--with-gdbm' '--with-gettext' '--with-gmp' '--with-iconv' '--with-jpeg-dir=/usr' '--with-mm' '--with-openssl' '--with-png' '--with-pspell' '--with-regex=system' '--with-ttf' '--with-xml' '--with-expat-dir=/usr' '--with-zlib' '--with-layout=GNU' '--enable-bcmath' '--enable-debugger' '--enable-ftp' '--enable-magic-quotes' '--enable-safe-mode' '--enable-sockets' '--enable-sysvsem' '--enable-sysvshm' '--enable-track-vars' '--enable-trans-sid' '--enable-yp' '--enable-wddx' '--without-oci8' '--with-imap=shared' '--with-imap-ssl' '--with-kerberos=/usr/kerberos' '--with-ldap=shared' '--with-mysql=shared' '--with-pgsql=shared' '--with-unixODBC=shared' '--with-apxs=/usr/sbin/apxs' I hope this helps. Regards, Adrian -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, visit: http://www.php.net/unsub.php
Re: [PHP-DB] Query construction (again)
- Original Message - From: Russ Michell [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, August 22, 2001 10:16 PM Subject: [PHP-DB] Query construction (again) Hey there folks - similar problem - different project! I want to select some records for a period of 7days after their insert [dateFrom] date. Last time I asked you guys for help I was helped toward the following solution: $sql = SELECT * FROM $Tpostings WHERE now()=dateFrom AND now()dateTo; The problem in this new project is that the 'dateTo' field is not included in the DB. It is 7-days after 'dateFrom'. So why does the following query not work: $sql = SELECT * FROM $tabitem WHERE DATE_ADD(submitDate, INTERVAL 7 DAY); No error is received though... There is no comparison in your WHERE clause. Try something like: $sql = SELECT * FROM $tabitem WHERE DATE_ADD(submitDate, INTERVAL 7 DAY) = now(); Depending on how the date is stored (date + time, or just date) you may have to modify the output of now() to match. hth -- Jason Wong Gremlins Associates www.gremlins.com.hk -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
Re: [PHP-DB] determining the value of an auto-incremented field (mysql)
- Original Message - From: Kenn Murrah [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, August 17, 2001 1:17 AM Subject: [PHP-DB] determining the value of an auto-incremented field (mysql) [snip] Having done so, how can I immediately determine the value of order_number for this entry, i.e. the auto-incremented value assigned by MySQL? Use mysql_insert_id(), it returns the ID generated for an AUTO_INCREMENT column by the previous INSERT query. regards -- Jason Wong Gremlins Associates www.gremlins.com.hk -- PHP Database Mailing List (http://www.php.net/) To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
Re: [PHP-DB] INSERT Won't Insert
Steve
I believe you're missing the closing bracket ) after $Website.
I think it's clearer if you use single quotes (') rather than double quotes
and then having to escape them.
Something like:
INSERT INTO $table_name
(CompanyID, CompanyName, Address, City, StateorProvince,
PostalCode,Region,Country,WebSite)
VALUES ('',
'$CompanyName',
'$Address',
'$City',
'$StateorProvince',
'$PostalCode',
'$Region',
'$Country',
'$WebSite');
regards
--
Jason Wong
Gremlins Associates
- Original Message -
From: Steve Fitzgerald [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, August 02, 2001 2:35 AM
Subject: [PHP-DB] INSERT Won't Insert
This should be a simple insert. I must be missing something because I keep
getting: Couldn't execute query.
What am I missing?
?
error_reporting(15);
$db_name = dbname;
$table_name=company;
$connection = @mysql_connect(servname,username, password)or die
(Couldn't connect.);
$db = @mysql_select_db($db_name, $connection) or die (Couldn't select
database.);
$add_co_sql = INSERT INTO $table_name
(CompanyID, CompanyName, Address, City, StateorProvince,
PostalCode,Region,Country,WebSite)
VALUES
(\\,
\$CompanyName\,\$Address\,\$City\,\$StateorProvince\,\$PostalCode\
,\$Region\,\$Country\,\$WebSite\
;
$result = @mysql_query($add_co_sql, $connection) or die (Couldn't execute
query.);
?
--
PHP Database Mailing List (http://www.php.net/)
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
To contact the list administrators, e-mail: [EMAIL PROTECTED]
--
PHP Database Mailing List (http://www.php.net/)
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
To contact the list administrators, e-mail: [EMAIL PROTECTED]
