[PHP-DEV] PHP 4.0 Bug #9850 Updated: Apache dies
ID: 9850 User Update by: [EMAIL PROTECTED] Old-Status: Feedback Status: Open Bug Type: Apache related Description: Apache dies After rebuilding with debugging support as you suggested, I got the following output: This GDB was configured as "i386-redhat-linux"... (no debugging symbols found)... (gdb) run -X Starting program: /usr/sbin/httpsd -X Cannot access memory at address 0x40701af4 (gdb) And this is the backtrace: (gdb) bt #0 0x4000af61 in _dl_debug_state () at dl-debug.c:56 #1 0x40184136 in _dl_close (map=0x80a84d8) at dl-close.c:195 #2 0x40183d50 in _dl_open (file=0x80a36c0 "/etc/httpd/modules/libphp4.so", mode=258, caller=0x0) at dl-open.c:250 #3 0x400a13d3 in dlopen_doit (a=0xbfffd964) at dlopen.c:41 #4 0x4000ac7b in _dl_catch_error (errstring=0x400a3080, operate=0x400a13a8 dlopen_doit, args=0xbfffd964) at dl-error.c:141 #5 0x400a18b9 in _dlerror_run (operate=0x400a13a8 dlopen_doit, args=0xbfffd964) at dlerror.c:125 #6 0x400a1393 in __dlopen_check ( file=0x80a36c0 "/etc/httpd/modules/libphp4.so", mode=258) at dlopen.c:53 #7 0x8067911 in ap_os_dso_load () #8 0x80501ba in ap_get_server_built () #9 0x80544e4 in ap_clear_module_list () #10 0x8054adc in ap_handle_command () #11 0x8054b28 in ap_srm_command_loop () #12 0x8054e97 in ap_process_resource_config () #13 0x8055514 in ap_read_config () #14 0x805cc9b in main () #15 0x400bd9cb in __libc_start_main (main=0x805cac0 main, argc=2, argv=0xbba4, init=0x804f750 _init, fini=0x807cf3c _fini, rtld_fini=0x4000aea0 _dl_fini, stack_end=0xbb9c) at ../sysdeps/generic/libc-start.c:92 (gdb) Also I discover that running httpsd directly (as opposed to the init.d script) does indeed reveal an error message. I had ealier suspected my problems might be related to ssl support since that had changed in 4.04p1. I've tried building --with-openssl but this fails with the error OpenSSL must be 0.9.6 or greater. I got hold of a Mandrake rpm for openssl 0.9.6. I am running RH but the package appeared to install ok and #openssl version reports: OpenSSL 0.9.6 but no dice one the build. I will look at the configure file and see how it detects openssl. [root@ssl php-4.0.4pl1]# /usr/sbin/httpsd Syntax error on line 190 of /etc/httpd/conf/httpsd.conf: Cannot load /etc/httpd/modules/libphp4.so into server: /etc/httpd/modules/libphp4.so: undefined symbol: SSL_CTX_set_tmp_rsa_callback One more thing. I got hold of php-4.03 (thanks Shane Chen). Same problem: undefined symbol: SSL_CTX_set_tmp_rsa_callback Previous Comments: --- [2001-03-19 19:13:22] [EMAIL PROTECTED] 1. delete config.cache 2. add --enable-debug into your configure line 3. after configure: 'make clean ; make ; make install' 4. then try generating gdb backtrace: # gdb /path/to/httpsd (gdb) run -X And then (if) it crashes: (gdb) bt and copy/paste the output into this bug report using the web interface. --Jani --- [2001-03-19 19:06:36] [EMAIL PROTECTED] I am trying to upgrade from php-4.02 and have this problem. Below are the specs on my system. It works find with 4.02, but when I use the exact same procedure to build-4.04p1 the following happens. ./configure, make and make install on php complete without errors. httpsd starts and immediately dies with no error messages and nothing has been found in any logs. When I say it starts and dies I mean: ./httpsd start gives an OK but ps -aux|grep ht shows no httpd processes running no matter how fast I type but ./httpsd start;ps -aux|grep ht shows 10 httpd processes, but will have dies before they can be tested again. The only variable would seem to be the difference between 4.02 and 4.04p1. After a careful look at the requirements and dependency I can't fine the cause. Unfotunately php.net doesn't seem to make earlier versions so I can't same how matters stand on 4.03 (Does anybody have this?). The system is running Red Hat 6.2 with updates linux kernel 2.2.17-14smp Apache is RH secure server 3.1.2 glibc 2.1.3-22 The php configure command line use for both 4.02 and 4.04p1 is: ./configure --with-apxs --with-kerberos=/usr/kerberos/ --with-imap --with-mysql --with-ldap --- Full Bug description available at: http://bugs.php.net/?id=9850 -- PHP Development Mailing List http://www.php.net/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
[PHP-DEV] PHP 4.0 Bug #9850 Updated: Apache dies
ID: 9850 User Update by: [EMAIL PROTECTED] Status: Open Bug Type: Apache related Description: Apache dies added --imap-ssl to the configure. That got rid of undefined symbol: SSL_CTX_set_tmp_rsa_callback but not the orginal problem. It still dies. New build (after rm config.cache , make clean) for a minimum php to debug ./configure --with-apxs --enable-debug curiously configure is still including mysql support anyway?? but this build does seem to stick (httpsd keeps running) Previous Comments: --- [2001-03-20 11:39:39] [EMAIL PROTECTED] After rebuilding with debugging support as you suggested, I got the following output: This GDB was configured as "i386-redhat-linux"... (no debugging symbols found)... (gdb) run -X Starting program: /usr/sbin/httpsd -X Cannot access memory at address 0x40701af4 (gdb) And this is the backtrace: (gdb) bt #0 0x4000af61 in _dl_debug_state () at dl-debug.c:56 #1 0x40184136 in _dl_close (map=0x80a84d8) at dl-close.c:195 #2 0x40183d50 in _dl_open (file=0x80a36c0 "/etc/httpd/modules/libphp4.so", mode=258, caller=0x0) at dl-open.c:250 #3 0x400a13d3 in dlopen_doit (a=0xbfffd964) at dlopen.c:41 #4 0x4000ac7b in _dl_catch_error (errstring=0x400a3080, operate=0x400a13a8 dlopen_doit, args=0xbfffd964) at dl-error.c:141 #5 0x400a18b9 in _dlerror_run (operate=0x400a13a8 dlopen_doit, args=0xbfffd964) at dlerror.c:125 #6 0x400a1393 in __dlopen_check ( file=0x80a36c0 "/etc/httpd/modules/libphp4.so", mode=258) at dlopen.c:53 #7 0x8067911 in ap_os_dso_load () #8 0x80501ba in ap_get_server_built () #9 0x80544e4 in ap_clear_module_list () #10 0x8054adc in ap_handle_command () #11 0x8054b28 in ap_srm_command_loop () #12 0x8054e97 in ap_process_resource_config () #13 0x8055514 in ap_read_config () #14 0x805cc9b in main () #15 0x400bd9cb in __libc_start_main (main=0x805cac0 main, argc=2, argv=0xbba4, init=0x804f750 _init, fini=0x807cf3c _fini, rtld_fini=0x4000aea0 _dl_fini, stack_end=0xbb9c) at ../sysdeps/generic/libc-start.c:92 (gdb) Also I discover that running httpsd directly (as opposed to the init.d script) does indeed reveal an error message. I had ealier suspected my problems might be related to ssl support since that had changed in 4.04p1. I've tried building --with-openssl but this fails with the error OpenSSL must be 0.9.6 or greater. I got hold of a Mandrake rpm for openssl 0.9.6. I am running RH but the package appeared to install ok and #openssl version reports: OpenSSL 0.9.6 but no dice one the build. I will look at the configure file and see how it detects openssl. [root@ssl php-4.0.4pl1]# /usr/sbin/httpsd Syntax error on line 190 of /etc/httpd/conf/httpsd.conf: Cannot load /etc/httpd/modules/libphp4.so into server: /etc/httpd/modules/libphp4.so: undefined symbol: SSL_CTX_set_tmp_rsa_callback One more thing. I got hold of php-4.03 (thanks Shane Chen). Same problem: undefined symbol: SSL_CTX_set_tmp_rsa_callback --- [2001-03-19 19:13:22] [EMAIL PROTECTED] 1. delete config.cache 2. add --enable-debug into your configure line 3. after configure: 'make clean ; make ; make install' 4. then try generating gdb backtrace: # gdb /path/to/httpsd (gdb) run -X And then (if) it crashes: (gdb) bt and copy/paste the output into this bug report using the web interface. --Jani --- [2001-03-19 19:06:36] [EMAIL PROTECTED] I am trying to upgrade from php-4.02 and have this problem. Below are the specs on my system. It works find with 4.02, but when I use the exact same procedure to build-4.04p1 the following happens. ./configure, make and make install on php complete without errors. httpsd starts and immediately dies with no error messages and nothing has been found in any logs. When I say it starts and dies I mean: ./httpsd start gives an OK but ps -aux|grep ht shows no httpd processes running no matter how fast I type but ./httpsd start;ps -aux|grep ht shows 10 httpd processes, but will have dies before they can be tested again. The only variable would seem to be the difference between 4.02 and 4.04p1. After a careful look at the requirements and dependency I can't fine the cause. Unfotunately php.net doesn't seem to make earlier versions so I can't same how matters stand on 4.03 (Does anybody have this?). The system is running Red Hat 6.2 with updates linux kernel 2.2.17-14smp Apache is RH secure server 3.1.2 glibc 2.1.3-22 The php configure command line use for both 4.02 and 4.04p1 is: ./configure --with-apxs --with-kerberos=/usr/kerberos/ --with-imap --with-mysql --with-ldap
[PHP-DEV] PHP 4.0 Bug #9850 Updated: Apache dies
ID: 9850 User Update by: [EMAIL PROTECTED] Status: Open Bug Type: Apache related Description: Apache dies I am able to build a php-4.04p1 that works if I leave out imap support. Also imap support doesn't build properly without kerberos and imap-ssl support. Previous Comments: --- [2001-03-20 13:38:36] [EMAIL PROTECTED] added --imap-ssl to the configure. That got rid of undefined symbol: SSL_CTX_set_tmp_rsa_callback but not the orginal problem. It still dies. New build (after rm config.cache , make clean) for a minimum php to debug ./configure --with-apxs --enable-debug curiously configure is still including mysql support anyway?? but this build does seem to stick (httpsd keeps running) --- [2001-03-20 11:39:39] [EMAIL PROTECTED] After rebuilding with debugging support as you suggested, I got the following output: This GDB was configured as "i386-redhat-linux"... (no debugging symbols found)... (gdb) run -X Starting program: /usr/sbin/httpsd -X Cannot access memory at address 0x40701af4 (gdb) And this is the backtrace: (gdb) bt #0 0x4000af61 in _dl_debug_state () at dl-debug.c:56 #1 0x40184136 in _dl_close (map=0x80a84d8) at dl-close.c:195 #2 0x40183d50 in _dl_open (file=0x80a36c0 "/etc/httpd/modules/libphp4.so", mode=258, caller=0x0) at dl-open.c:250 #3 0x400a13d3 in dlopen_doit (a=0xbfffd964) at dlopen.c:41 #4 0x4000ac7b in _dl_catch_error (errstring=0x400a3080, operate=0x400a13a8 dlopen_doit, args=0xbfffd964) at dl-error.c:141 #5 0x400a18b9 in _dlerror_run (operate=0x400a13a8 dlopen_doit, args=0xbfffd964) at dlerror.c:125 #6 0x400a1393 in __dlopen_check ( file=0x80a36c0 "/etc/httpd/modules/libphp4.so", mode=258) at dlopen.c:53 #7 0x8067911 in ap_os_dso_load () #8 0x80501ba in ap_get_server_built () #9 0x80544e4 in ap_clear_module_list () #10 0x8054adc in ap_handle_command () #11 0x8054b28 in ap_srm_command_loop () #12 0x8054e97 in ap_process_resource_config () #13 0x8055514 in ap_read_config () #14 0x805cc9b in main () #15 0x400bd9cb in __libc_start_main (main=0x805cac0 main, argc=2, argv=0xbba4, init=0x804f750 _init, fini=0x807cf3c _fini, rtld_fini=0x4000aea0 _dl_fini, stack_end=0xbb9c) at ../sysdeps/generic/libc-start.c:92 (gdb) Also I discover that running httpsd directly (as opposed to the init.d script) does indeed reveal an error message. I had ealier suspected my problems might be related to ssl support since that had changed in 4.04p1. I've tried building --with-openssl but this fails with the error OpenSSL must be 0.9.6 or greater. I got hold of a Mandrake rpm for openssl 0.9.6. I am running RH but the package appeared to install ok and #openssl version reports: OpenSSL 0.9.6 but no dice one the build. I will look at the configure file and see how it detects openssl. [root@ssl php-4.0.4pl1]# /usr/sbin/httpsd Syntax error on line 190 of /etc/httpd/conf/httpsd.conf: Cannot load /etc/httpd/modules/libphp4.so into server: /etc/httpd/modules/libphp4.so: undefined symbol: SSL_CTX_set_tmp_rsa_callback One more thing. I got hold of php-4.03 (thanks Shane Chen). Same problem: undefined symbol: SSL_CTX_set_tmp_rsa_callback --- [2001-03-19 19:13:22] [EMAIL PROTECTED] 1. delete config.cache 2. add --enable-debug into your configure line 3. after configure: 'make clean ; make ; make install' 4. then try generating gdb backtrace: # gdb /path/to/httpsd (gdb) run -X And then (if) it crashes: (gdb) bt and copy/paste the output into this bug report using the web interface. --Jani --- [2001-03-19 19:06:36] [EMAIL PROTECTED] I am trying to upgrade from php-4.02 and have this problem. Below are the specs on my system. It works find with 4.02, but when I use the exact same procedure to build-4.04p1 the following happens. ./configure, make and make install on php complete without errors. httpsd starts and immediately dies with no error messages and nothing has been found in any logs. When I say it starts and dies I mean: ./httpsd start gives an OK but ps -aux|grep ht shows no httpd processes running no matter how fast I type but ./httpsd start;ps -aux|grep ht shows 10 httpd processes, but will have dies before they can be tested again. The only variable would seem to be the difference between 4.02 and 4.04p1. After a careful look at the requirements and dependency I can't fine the cause. Unfotunately php.net doesn't seem to make earlier versions so I can't same how matters stand on 4.03 (Does anybody have this?). The system is running Red Hat 6.2 with updates linux kernel 2.2.17-14smp Apache is RH secure server
[PHP-DEV] PHP 4.0 Bug #9850 Updated: Apache dies
ID: 9850 Updated by: sniper Reported By: [EMAIL PROTECTED] Old-Status: Open Status: Feedback Bug Type: Apache related Assigned To: Comments: 1. delete config.cache 2. add --enable-debug into your configure line 3. after configure: 'make clean ; make ; make install' 4. then try generating gdb backtrace: # gdb /path/to/httpsd (gdb) run -X And then (if) it crashes: (gdb) bt and copy/paste the output into this bug report using the web interface. --Jani Previous Comments: --- [2001-03-19 19:06:36] [EMAIL PROTECTED] I am trying to upgrade from php-4.02 and have this problem. Below are the specs on my system. It works find with 4.02, but when I use the exact same procedure to build-4.04p1 the following happens. ./configure, make and make install on php complete without errors. httpsd starts and immediately dies with no error messages and nothing has been found in any logs. When I say it starts and dies I mean: ./httpsd start gives an OK but ps -aux|grep ht shows no httpd processes running no matter how fast I type but ./httpsd start;ps -aux|grep ht shows 10 httpd processes, but will have dies before they can be tested again. The only variable would seem to be the difference between 4.02 and 4.04p1. After a careful look at the requirements and dependency I can't fine the cause. Unfotunately php.net doesn't seem to make earlier versions so I can't same how matters stand on 4.03 (Does anybody have this?). The system is running Red Hat 6.2 with updates linux kernel 2.2.17-14smp Apache is RH secure server 3.1.2 glibc 2.1.3-22 The php configure command line use for both 4.02 and 4.04p1 is: ./configure --with-apxs --with-kerberos=/usr/kerberos/ --with-imap --with-mysql --with-ldap --- ATTENTION! Do NOT reply to this email! To reply, use the web interface found at http://bugs.php.net/?id=9850edit=2 -- PHP Development Mailing List http://www.php.net/ To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] To contact the list administrators, e-mail: [EMAIL PROTECTED]
