groundplates about the size of individual
trays.
Frans van Dijk.
-Oorspronkelijk bericht-
Van: Greg Newberry [mailto:grnewbe...@qwest.net]
Verzonden: vrijdag 12 april 2002 2:22
Aan: Pinhole-Discussion
Onderwerp: [pinhole-discussion] Darkroom sink question
I hope this is not out of place
I made huge sinks for a project at work. Four of them each 3 ft wide and 11
ft long, 6 inches deep.
The have been used for 3 or 4 years without any leaking.
I made the sinks out of plywood, but lined them with 1/8 inch PVC sheet
plastic. I had the plastic formed
at a shop to a U shape to
From: Greg Newberry grnewbe...@qwest.net
Reply-To: pinhole-discussion@p at ???
Date: Thu, 11 Apr 2002 18:22:04 -0600
To: Pinhole-Discussion pinhole-discussion@p at ???
Subject: [pinhole-discussion] Darkroom sink question
I hope this is not out of place here. Forgive me
and
camera/photo stores. It might help just to look at it for the
duckboard plans.
Tom
- Original Message -
From: Greg Newberry grnewbe...@qwest.net
To: Pinhole-Discussion pinhole-discussion@p at ???
Sent: Thursday, April 11, 2002 7:22 PM
Subject: [pinhole-discussion] Darkroom sink
I hope this is not out of place here. Forgive me if it is..
I've just built a darkroom and a new sink. It's 8 foot x 22 inches. I want
to build some wooden strips/runners to line the bottom so the trays are off
the bottom and allow the water and chemicals to flow through to the drain.
What is a
