-discussion] Will paper work in 4x5 film holder?
I wonder if 4x5 enlarging paper will fit exactly in
the sheet film holders?
They should, but I haven't tried...
-Jeff
On Tue, 18 Dec 2001, Andy Schmitt wrote:
Why not? As long as you cut it the right side put the
emulsion
Absolutely. use a fim speed of 5 or6.
- Original Message -
From: Chris chri...@worldnet.att.net
To: pinhole-discussion@p at ???
Sent: Tuesday, December 18, 2001 9:10 AM
Subject: [pinhole-discussion] Will paper work in 4x5 film holder?
I'm building my first 4x5 pin hole. It's an
--- Jeff Dilcher r...@hiddenworld.net wrote:
I wonder if 4x5 enlarging paper will fit exactly in
the sheet film holders?
They should, but I haven't tried...
-Jeff
It should work, although I would imagine that the curvature in the paper might
cause you some problems. As this is pinhole,
Thanks, those tips should help!
Rob
From: Chris Peregoy pere...@gl.umbc.edu
Reply-To: pinhole-discussion@p at ???
Date: Tue, 18 Dec 2001 12:09:34 -0500
To: pinhole-discussion@p at ???
Subject: Re: [pinhole-discussion] Will paper work in 4x5 film holder?
Rob,
You might
i think the trick is going to be to cut the paper a bit longer than 5 so that
it hangs out of the holder a little.
oops.. sorry if that was confusing.. i'm using 4x5 film holders.. so maybe
cutting it 4 x 5.25 (like i said - a bit longer than 5) would work?
rob
Another inexpensive option would be the arista ortho litho film from
freestyle. It is sold precut for filmholders, 4.9x3.9, and at last
check it was 17.99 for 100 sheets. Not bad. It's better than finding
out the hard way that the huge box of 5x7 paper has to be shaved just a
wee bit so it will
Dec 2001 10:39:21 -0500 (EST)
To: pinhole-discussion@p at ???
Subject: RE: [pinhole-discussion] Will paper work in 4x5 film holder?
I wonder if 4x5 enlarging paper will fit exactly in
the sheet film holders?
They should, but I haven't tried...
-Jeff
On Tue, 18 Dec 2001, Andy
Just a note that 4x5 film is actually a little smaller than 4 x 5. You should
be able to use
paper in a film holder if you cut it to the correct size.
Gord
On Tue, Dec 18, 2001 at 10:39:21AM -0500, Jeff Dilcher wrote:
I wonder if 4x5 enlarging paper will fit exactly in
the sheet film
I wonder if 4x5 enlarging paper will fit exactly in
the sheet film holders?
They should, but I haven't tried...
-Jeff
On Tue, 18 Dec 2001, Andy Schmitt wrote:
Why not? As long as you cut it the right side put the emulsion facing out
( 80) )
it should be a very good method for holding it.
Why not? As long as you cut it the right side put the emulsion facing out
( 80) )
it should be a very good method for holding it.
andy
-Original Message-
From: pinhole-discussion-admin@p at ???
[mailto:pinhole-discussion-admin@p at ???]On Behalf Of Chris
Sent: Tuesday, December
10 matches
Mail list logo
