On Tue, Nov 5, 2019 at 10:03 AM Rich Shepard
wrote:
> On Tue, 5 Nov 2019, Michael Barnes wrote:
>
> > To my knowledge (admittedly limited), you do not use rc.inet to configure
> > the IP address of peripheral equipment not physically part of that
> > computer.
>
> In Slackware one uses
On Tue, Nov 5, 2019 at 10:01 AM Rich Shepard
wrote:
> On Tue, 5 Nov 2019, Michael Barnes wrote:
>
> > I'm getting really confused here. The /etc/hosts file is not for setting
> > IP addresses on devices.
>
> Michael,
>
> You're correct. But, it tells me which IP address is assigned to a device.
On Tue, 5 Nov 2019, Michael Barnes wrote:
To my knowledge (admittedly limited), you do not use rc.inet to configure
the IP address of peripheral equipment not physically part of that
computer.
In Slackware one uses /etc/rc.d/rc.inet1.conf to set Ethernet and wireless
interfaces. They are
On Tue, 5 Nov 2019, Ben Koenig wrote:
3) WICD has been installed and is being used as a drop in replacement for
NetworkManager
Not on the desktops.
Rich
___
PLUG mailing list
PLUG@pdxlinux.org
http://lists.pdxlinux.org/mailman/listinfo/plug
On Tue, 5 Nov 2019, Michael Barnes wrote:
I'm getting really confused here. The /etc/hosts file is not for setting
IP addresses on devices.
Michael,
You're correct. But, it tells me which IP address is assigned to a device.
This means that these devices must have static addresses for this
On Tue, Nov 5, 2019 at 8:19 AM Ben Koenig wrote:
> Since he's running slackware, IP addresses are set by 1 of 3 functions:
> 1) /etc/rc.d/rc.inet1 runs at boot time and manually configures network
> interfaces
> 2) The system has been configured to run NetworkManager (meaning that
>
Since he's running slackware, IP addresses are set by 1 of 3 functions:
1) /etc/rc.d/rc.inet1 runs at boot time and manually configures network
interfaces
2) The system has been configured to run NetworkManager (meaning that
/etc/rc.d/rc.inet1.conf is left at defaults)
3) WICD has been installed
On Tue, Nov 5, 2019 at 5:51 AM Rich Shepard
wrote:
> On Mon, 4 Nov 2019, John Jason Jordan wrote:
>
> > In all my years of printing from computers to printers over a network,
> > I've never run into a printer whose IP address could not be changed
> > from the printer's control panel.
>
> John,
>
On Mon, 4 Nov 2019, wes wrote:
I've set IPs on printers using even fewer buttons than that.
Wes,
As I wrote in reply to John's message I've not before had a printer with a
built-in IP address. All my HP's had their IP address set in /etc/hosts on
the server.
If you can suggest how I might
On Mon, 4 Nov 2019, John Jason Jordan wrote:
In all my years of printing from computers to printers over a network,
I've never run into a printer whose IP address could not be changed
from the printer's control panel.
John,
My experiences over the past couple of decades is the opposite: I've
On Mon, Nov 4, 2019 at 5:06 PM Rich Shepard
wrote:
> The controls on the panel are four arrow buttons and a central 'select'
> button. No way to enter numbers ... at least no way in the minimal
> documentation that came with the printer.
>
>
I've set IPs on printers using even fewer buttons than
On Mon, 4 Nov 2019, Johnathan Mantey wrote:
Usually there are Windows SW elements that search for "Our Wonderful Brand
of XYZ", and auto-finds it on your local net segment.
Of course this is useless to those not using the Redmond offering.
It's likely that the setup cdrom does this for
On Mon, 4 Nov 2019, John Jason Jordan wrote:
In all my years of printing from computers to printers over a network,
I've never run into a printer whose IP address could not be changed from
the printer's control panel. It's usually buried several layers deep to
make it less likely that some
On Mon, 4 Nov 2019, Russell Senior wrote:
If the IP address of the EWS is different that your computer usually has,
then yeah, otherwise, how are you going to reach it? You can add an
address to a suitable interface with the "ip addr add
/ dev " command, and then remove it
when you are done by
On Mon, 4 Nov 2019, tomas.kuchta.li...@gmail.com wrote:
If you can ping it from your LAN, you should be able to get web traffic
too.
Tomas,
Ping fails; different subnet than the LAN.
Did you try to talk both http://ip and https://ip to the printer?
Maybe one of the will work.
My
On Mon, 4 Nov 2019, Ben Koenig wrote:
Yes, you do need to be on the same subnet. If you have a laptop handy that
would be easiest, just plug a cat5 cable in directly to your ethernet port
and set your IP to match.
I thought so.
I doubt the printer is running any kind of DHCP server, so
Usually there are Windows SW elements that search for "Our Wonderful Brand
of XYZ", and auto-finds it on your local net segment.
Of course this is useless to those not using the Redmond offering.
On Mon, Nov 4, 2019 at 4:20 PM John Jason Jordan wrote:
> On Mon, 4 Nov 2019 15:48:57 -0800 (PST)
>
On Mon, 4 Nov 2019 15:48:57 -0800 (PST)
Rich Shepard dijo:
>On Mon, 4 Nov 2019, Rich Shepard wrote:
>
>> Has anyone ideas how I can change that IP address to one that's on
>> my LAN?
In all my years of printing from computers to printers over a network,
I've never run into a printer whose IP
If the IP address of the EWS is different that your computer usually has,
then yeah, otherwise, how are you going to reach it? You can add an
address to a suitable interface with the "ip addr add
/ dev " command, and then remove it when
you are done by replacing "add" with "del".
No warranty
If you can ping it from your LAN, you should be able to get web traffic too.
Did you try to talk both http://ip and https://ip to the printer?
Maybe one of the will work.
-T
On Mon, 2019-11-04 at 15:48 -0800, Rich Shepard wrote:
> On Mon, 4 Nov 2019, Rich Shepard wrote:
>
> > Has anyone ideas
On Mon, Nov 4, 2019 at 3:49 PM Rich Shepard
wrote:
> On Mon, 4 Nov 2019, Rich Shepard wrote:
>
> > Has anyone ideas how I can change that IP address to one that's on my
> LAN?
>
> Update: I found a Dell web page that says I can change the IP address using
> the printer's embedded web server
On Mon, 4 Nov 2019, Rich Shepard wrote:
Has anyone ideas how I can change that IP address to one that's on my LAN?
Update: I found a Dell web page that says I can change the IP address using
the printer's embedded web server (EWS). So I try to open that IP address
on a new tab, but firefox
22 matches
Mail list logo