new memory record for me

! Unfortunately it seems that the latest NVidia Quadro 6000 video cards have only a 39bit register for addressing memory which means there are problems when using them in systems with 512GB or more of memory. -- Steven DuChene --- PLUG-discuss mailing

Re: no luck on memory for mystery Intel motherboard

nope, no beep codes -Original Message- From: Stephen Sent: Aug 14, 2012 11:25 PM To: Main PLUG discussion list , Steven A. DuChene Subject: Re: no luck on memory for mystery Intel motherboard Any beep codes? If just ram it should be making noise On Aug 14, 2012 7:25 PM, Steven

Re: no luck on memory for mystery Intel motherboard

cryptwo...@gmail.com Sent: Aug 15, 2012 7:27 AM To: Steven A. DuChene linux-clust...@mindspring.com Cc: Main PLUG discussion list plug-discuss@lists.plug.phoenix.az.us Subject: Re: no luck on memory for mystery Intel motherboard you might have a dead board then, if its ram the thing doesn't like

no luck on memory for mystery Intel motherboard

tied to the MB says: Platform family: Tylerburg (not Tylersburg) Platform name: Burnside Platform P/N: D70751-201 Processor/Stepping: NMH IOH/Stepping: TYB -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us

getting rid of android on tablet

of this possible at all? -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss

Re: getting rid of android on tablet

of these android devices. -- Steven DuChene -Original Message- From: JD Austin Sent: Aug 11, 2012 11:37 AM To: Steven A. DuChene , Main PLUG discussion list Subject: Re: getting rid of android on tablet http://androlinux.com/android-ubuntu-development/how-to-install-ubuntu-on-android

Re: looking for DDR3 1066MHz ECC or non-ECC memory

stuff. -- Steven DuChene -Original Message- From: Lisa Kachold Sent: Aug 7, 2012 9:48 PM To: Steven A. DuChene , Main PLUG discussion list Subject: Re: looking for DDR3 1066MHz ECC or non-ECC memory If you do in fact have a Nehalem it is non-ecc. Be sure you have populated your dimms

Re: looking for DDR3 1066MHz ECC or non-ECC memory

anyone successfully removed a heat sink off of a non-CPU motherboard chip and then reinstalled it with no damage to the motherboard? Like the bridge or other MB controller chips that have heat sinks held down with spring clips that fasten under loops soldered into the motherboard. -- Steven DuChene

Re: looking for DDR3 1333MHz ECC memory

memory rather than the 1333MHz stuff. -- Steven DuChene -Original Message- From: Lisa Kachold Sent: Aug 6, 2012 8:57 PM To: Steven A. DuChene , Main PLUG discussion list Subject: Re: looking for DDR3 1333MHz ECC memory Hi Steven, On Mon, Aug 6, 2012 at 6:00 PM, Steven A. DuChene

looking for DDR3 1066MHz ECC or non-ECC memory

get a video signal or not. Then I will know what type of memory to purchase. -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http

looking for DDR3 1333MHz ECC memory

ECC memory DIMMs they could bring to a PLUG meeting so I can try to see if that is the correct memory before I purchase new DIMMs? -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe

Re: ot audio and facebook

There are also on-line web sites that will let you paste a youtube URL into a form and it will download the video and export a MP3 file back to you. http://www.mediaconverter.org is one site I know of that does this for you. -- Steven DuChene

Re: ot audio and facebook

I believe the first few file conversions are free but then you have to subscribe to the service. I think subscribing also gets you better quality audio files and perhaps larger files. -- Steven DuChene -Original Message- From: Michael Havens bmi...@gmail.com Sent: Aug 6, 2012 7:50 PM

hacking an android tablet to single function device

meeting at some point? I.E. from someone who knows a LOT more about this than I do? -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http

Developers meeting tonight?

Last time I drove over to UAT for a Thursday night developers meeting there was no meeting. Is there a Developers meeting this evening at UAT? -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe

network issue blocks svn code pull?

svn://clusterresources.com/torque/branches/4.0-fixes I even tried just a simple svn list command instead of a checkout and still I got the same result. It hangs for some period of time and then finally times out with an error about not being able to connect to the remote host. -- Steven DuChene

Re: What is the presentation for Thursday PLUGeast?

So is there definately an east side meeting this evening? -- Steven DuChene -Original Message- From: Dazed_75 Sent: Jan 11, 2012 3:40 PM To: Main PLUG discussion list Subject: Re: What is the presentation for Thursday PLUGeast? I will be doing a presentation on Editing Video

RHEL-6.1 system with 4 CPU sockets and 1TB of memory

this fascinating. -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss

Re: RHEL-6.1 system with 4 CPU sockets and 1TB of memory

That should have said: for a total of 1TB of real memory and zero swap. -Original Message- From: Steven A. DuChene linux-clust...@mindspring.com Sent: Jan 10, 2012 3:59 PM To: plug-discuss@lists.plug.phoenix.az.us Subject: RHEL-6.1 system with 4 CPU sockets and 1TB of memory So I am

Re: RHEL-6.1 system with 4 CPU sockets and 1TB of memory

power Xeon per blade. -- Steven DuChene -Original Message- From: Stephen Sent: Jan 10, 2012 4:22 PM To: Main PLUG discussion list , Steven A. DuChene Subject: Re: RHEL-6.1 system with 4 CPU sockets and 1TB of memory Sure. Rub it in now get us some results :-) On Jan 10, 2012 4

no-one at developers meeting?

it on the calendar website? -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss

Re: Hackfest Schedule

I am confused. Are you saying there will not be a meeting this coming Saturday or there will? -- Steven DuChene -Original Message- From: Lisa Kachold Sent: Nov 3, 2011 5:32 PM To: brian , PLUG Linux Security Team , Main PLUG discussion list , PLUG Applcations List Subject

no video showing up on new system

systems fine but I still get no video out when I power on this system. In looking over the specs for the q9550 processor I see it is supposed to have a 1333MHz FSB and the motherboard definitely lists support for DDR3 1333MHz memory. Anyone here have any ideas or suggestions? -- Steven DuChene

Re: no video showing up on new system

The motherboard was in a sealed package from Intel from what I could tell. I will try the no memory trick next. -Original Message- From: Dazed_75 Sent: Nov 1, 2011 8:55 AM To: Steven A. DuChene , Main PLUG discussion list Subject: Re: no video showing up on new system If it were

Re: Is it possible to extract the root password from the file system?

There are password hacking tools out there you could run against the encrypted password that is stored in /etc/shadow but if there is a locked root account there may not be an encrypted password for root in that file and you will never be able to login. -- Steven DuChene -Original Message

adding an rpm to a kickstart repo

direction on how to proceed from this point or point me towards some definite documentation on the process? -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail

stupid perl question

it to work. What am I doing wrong??? -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss

Re: stupid perl question

2011 4:21 PM To: Main PLUG discussion list <plug-discuss@lists.plug.phoenix.az.us>, "Steven A. DuChene" <linux-clust...@mindspring.com> Subject: Re: stupid perl question Is there a reason the log scraper needs to be done in perl? There is autility that will read log files fr

setting non-standard baud rate on serial port

: invalid argument `8192' Try `stty --help' for more information. Anyone have any idea how to set baud rate on a serial port to a non-standard baud rate like this? -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss

recommend serial-to-usb adapter?

to function in Linux. Can anyone recommend a brand or model to me and possibly a place that stocks such a thing? If it was local I would have better chance of returning it if it did not work. Thanks in advance. -- Steven DuChene --- PLUG-discuss mailing

Re: how to reference bash variables inside perl script inside bash script?

I think that did the trick Eric. Thanks! -Original Message- From: Eric Shubert e...@shubes.net Sent: Jun 24, 2010 11:02 AM To: plug-discuss@lists.plug.phoenix.az.us Subject: Re: how to reference bash variables inside perl script inside bash script? Stuff inside of single quotes

how to reference bash variables inside perl script inside bash script?

like this: #!/bin/bash perl 'EOF' print(userPassword: {CRYPT}.crypt($OPASS,frat-salt).\n); EOF but I still don't think the bash variable OPASS would get properly evaluated in the perl invocation. Any ideas? -- Steven DuChene --- PLUG-discuss

need rack brackets - have power cords

of those sorts of PDUs so they are useless to me. If anyone wants some of these let me know and I will bring to an east side meeting or install-fest. These types of PDU power connections are shown here: http://www.apc-forums.com/servlet/JiveServlet/download/7-1995-7257-417/P1010011.JPG -- Steven

Re: Installfest this Saturday - PLUG website dead?

Yes, I am using cox but I guess the bigger question is WHY is cox reporting an incorrect IP for the plug web server? -Original Message- From: Brian Cluff br...@snaptek.com Sent: Feb 28, 2010 1:56 AM To: Main PLUG discussion list plug-discuss@lists.plug.phoenix.az.us Subject: Re:

Re: Installfest this Saturday - PLUG website dead?

Yes, but you will notice they call that an Enhanced Error Results Page so that must be OK! :-) -Original Message- From: Brian Cluff br...@snaptek.com Sent: Feb 28, 2010 8:13 PM To: Main PLUG discussion list plug-discuss@lists.plug.phoenix.az.us Subject: Re: Installfest this Saturday -

Re: Installfest this Saturday - PLUG website dead?

I have been trying to get to the web site this morning to find more information about the install fest but the PLUG website seems to be DOA. -Original Message- From: Dazed_75 Sent: Feb 25, 2010 11:49 PM To: Main PLUG discussion list Subject: Installfest this Saturday We will be

Re: free long (approx 30ft) ethernet cables

) ethernet cables Steven A. DuChene wrote: I am involved in a data center move project and as part of the project all of the ethernet cabling is being replaced. As such we have a 2ftx2ftx2ft box full of what I believe are 30ft long ethernet cables of various colors. What type? cat5e? There might

free long (approx 30ft) ethernet cables

this stuff to the next east side meeting. -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss

Re: Project Update

If it was me I would look for a distribution that had newer bits (Samba etc)than CentOS5.4Perhaps OpenSuSE-11.2 or similar.-Original Message- From: Sean Parsons Sent: Jan 31, 2010 12:11 PM To: 'Main PLUG discussion list'

Anyone find a book at the meeting?

. If anyone seen this at the meeting I would appreciate knowing about it so we can stop going crazy looking for it around here. -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change

loading fresh system from rpm list?

tools out there that would do this? -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss

Re: loading fresh system from rpm list?

the rpms in my original list? -Original Message- From: Ryan Rix phrkonale...@gmail.com Sent: Nov 23, 2009 2:55 PM To: plug-discuss@lists.plug.phoenix.az.us Subject: Re: loading fresh system from rpm list? Steven A. DuChene wrote: I have been requested to load a duplicate system based

Re: loading fresh system from rpm list?

on the original system. -Original Message- From: R P Herrold herr...@owlriver.com Sent: Nov 23, 2009 2:54 PM To: Steven A. DuChene linux-clust...@mindspring.com, Main PLUG discussion list plug-discuss@lists.plug.phoenix.az.us Subject: loading fresh system from rpm list? On Mon, 23 Nov 2009, Steven

Re: running Linux on odd devices is SOOO COOL!

OK, I am going to force-ably pull this back on topic! :-) If anyone is interested in seeing this Nintendo DS running Linux and wants to know how to do it, I can bring it to one of the east side PLUG meetings and do a 5 - 10 minute talk on the process. -- Steven DuChene

Re: running Linux on odd devices is SOOO COOL!

dslinux.org Wiki: dslinux.org/wiki Forums: dslinux.org/f0rums (yes, the word forums but spelled with a zero in place of the o) -Original Message- From: Stephen cryptwo...@gmail.com Sent: Nov 15, 2009 6:54 PM To: Steven A. DuChene linux-clust

Wireless security (was linux on odd devices)

Yes, I realize this whole wireless encryption stuff is just to fool peopleinto believing they are secure.I was in BestBuy a few weeks ago and I noticed a power line networkingproduct they had that seemed like it would be a much better solution toproviding network coverage inside a house. The

slightly used lc-lc fiber cables

100% do not complain to me. :-) -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss

running Linux on odd devices is SOOO COOL!

So I am running a special version of Linux on my son's Nintendo DS Lite handheld game console! It is so cool! --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings:

Re: running Linux on odd devices is SOOO COOL!

. :-) -Original Message- From: Alan Dayley ala...@consultpros.com Sent: Nov 14, 2009 1:08 AM To: Steven A. DuChene linux-clust...@mindspring.com, Main PLUG discussion list plug-discuss@lists.plug.phoenix.az.us Subject: Re: running Linux on odd devices is SOOO COOL! What fun! Keep playing

Re: HackFest Evening Schedule Changes - Request for Community Suggestions and Feedback

Dumb question time.I have never attended one of these hackfest events.What are they exactly?--Steven DuChene-Original Message- From: Lisa Kachold <lisakach...@obnosis.com> Sent: Nov 3, 2009 4:19 PM To: Main PLUG discussion list <plug-discuss@lists.plug.phoenix.az.us>, PLUG Appl

weirdness with slow ssh connections (IPv6 related?)

problem between IPv6 and DNS but I do not have a clear plan on what to try next. Any suggestions? -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http

Re: weirdness with slow ssh connections (IPv6 related?)

I tried the OPTIONS=-4 suggestion in the /etc/sysconfig/named file and restarted named on all my nameservers but it made no difference. Doing the following: r...@adm # ssh new75 (or any of the 50 - 70 RHEL5/CentOS5 servers) takes a LONG time to get a shell prompt. I did confirm that the -4 is

looking for redhat-release file from RHEL5Ux

I am trying to write a script that parses a redhat-release file and I need such a file from RHEL5U1 or RHEL5U2 or RHEL5U3 I have the same file from CentOS5 but I need the same thing from one of the actual RHEL5 releases detailed above. Thanks in advance

Re: looking for redhat-release file from RHEL5Ux

I was able to get what I needed from the redhat-release SRPM as Craig suggested. Thanks all! -Original Message- From: der.hans pl...@lufthans.com Sent: Oct 16, 2009 11:43 PM To: Steven A. DuChene linux-clust...@mindspring.com, Main PLUG discussion list plug-discuss

FTC publishes guidelines for blogs

to Microsoft. Hmmm, perhaps this is just wishful thinking... -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us/mailman

OT: TSA Secure Flight?

regulations from TSA or Homeland Security governement organizations is just getting too much for anyone concerned about personal privacy issues. -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe

Re: SATA drive problem

The drivers for SATA disk controllers are implemented as part of the SCSIcode tree and thus show up as sdX drives rather than hdXThis is a normal condition.As far as the "ghosting" showing up in Gnome's File Browser I have no clue.-Original Message- From: Mark Jarvis

Re: ABLEconf work mtg, Monday nights

Umm, what IRC system is #ABLEconf in? freenode.net or somewhere else? -Original Message- From: der.hans pl...@lufthans.com Sent: Sep 21, 2009 10:26 PM To: quatsch PLUG-discuss@lists.PLUG.phoenix.az.us Subject: ABLEconf work mtg, Monday nights moin moin, ABLEconf has started a new work

Re: topics for east side this Thursday?

I don't see any details on the plug site about my ganglia talk. I sent both you and Mathew the abstract. Should I show up or not? -Original Message- From: der.hans pl...@lufthans.com Sent: Sep 10, 2009 4:18 AM To: Main PLUG discussion list plug-discuss@lists.plug.phoenix.az.us Subject:

Re: topics for east side this Thursday?

Whoops, nevermind. I found it. It is just not showing up on the main plug page but does once I click on the east side meeting link. -Original Message- From: der.hans pl...@lufthans.com Sent: Sep 10, 2009 4:18 AM To: Main PLUG discussion list plug-discuss@lists.plug.phoenix.az.us Subject:

Re: east side meeting room equipment availability?

Larry:Is there internet connectivity in the room?-Original Message- From: Dazed_75 <lthiels...@gmail.com> Sent: Sep 8, 2009 7:20 PM To: "Steven A. DuChene" <linux-clust...@mindspring.com>, Main PLUG discussion list <plug-discuss@lists.plug.phoenix.az.us> Subject

Re: topics for east side this Thursday?

If there is interest I can do a talk on the ganglia systems monitoring. The talk would show how to install and configure it and then show how it works. Also there would be a little info on how to ad additional metrics to the monitoring stream. -- Steven DuChene

east side meeting room equipment availability?

Is there a projection system and a white board markers available at the east side meeting location? If there is a computer display projector available does anyone know what display resolution it is able to support? It has been a while since I have been to a meeting. -- Steven DuChene

Re: Employee owned IT consulting meeting.

Where is more information about this installfest? I looked on the plug web site and the only installfest listed is for Jun 27 - 10:00 -Original Message- From: Trent Shipley tship...@deru.com Sent: Aug 27, 2009 7:19 PM To: Main PLUG discussion list plug-discuss@lists.plug.phoenix.az.us

correct way to set timezone clock/date?

. if you use NTP what externally reliable NTP server do you use? -- Steven DuChene --- PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us To subscribe, unsubscribe, or to change your mail settings: http://lists.PLUG.phoenix.az.us

Re: correct way to set timezone clock/date?

@lists.plug.phoenix.az.us Subject: Re: correct way to set timezone clock/date? Steven A. DuChene wrote: I have a few systems here in my home that are either fedora or opensuse installs. I was setting up ganglia last night to add some monitoring to my home setup and discovered I had some issues

Re: correct way to set timezone clock/date?

no difference to my problem. nuts... -- Steve -Original Message- From: kitepi...@kitepilot.com kitepi...@kitepilot.com Sent: Aug 25, 2009 2:13 PM To: Steven A. DuChene linux-clust...@mindspring.com, Main PLUG discussion list plug-discuss@lists.plug.phoenix.az.us Subject: Re: correct way to set

Re: correct way to set timezone clock/date?

ago. Is there anywhere else where ntp activity gets logged or a way to turn up the debug level on the ntpd process? -- Steve -Original Message- From: Alex Dean a...@crackpot.org Sent: Aug 25, 2009 2:33 PM To: Steven A. DuChene linux-clust...@mindspring.com, Main PLUG discussion list plug

RE: correct way to set timezone clock/date?

yes -Original Message- From: Bob Elzer Sent: Aug 25, 2009 3:24 PM To: 'Steven A. DuChene' , 'Main PLUG discussion list' Subject: RE: correct way to set timezone clock/date? Are you running ntpdate as root ? From: plug-discuss-boun...@lists.plug.phoenix.az.us [mailto:plug

Re: correct way to set timezone clock/date?

momentarily for a test to be sure that's where your blockage is? Steven A. DuChene wrote: I ran the following: ntpdate -v -d dewey.lib.ci.phoenix.az.us ntp.drydog.com and it looked for and found both hosts but then just sits there with no other output. -- Steve -Original

RE: correct way to set timezone clock/date?

SuSE-10.1 does not seem to have rdate as an available utility. -Original Message- From: Bob Elzer bob.el...@gmail.com Sent: Aug 25, 2009 3:19 PM To: 'Main PLUG discussion list' plug-discuss@lists.plug.phoenix.az.us Subject: RE: correct way to set timezone clock/date? To set you initial

Re: correct way to set timezone clock/date?

: Alex Dean a...@crackpot.org Sent: Aug 25, 2009 3:45 PM To: Steven A. DuChene linux-clust...@mindspring.com, Main PLUG discussion list plug-discuss@lists.plug.phoenix.az.us Subject: Re: correct way to set timezone clock/date? How far off is your current time from the ntp server's time

Re: correct way to set timezone clock/date?

it should also list the two other ntp servers I have configured in the ntp.conf file. Right? -Original Message- From: Steven A. DuChene linux-clust...@mindspring.com Sent: Aug 25, 2009 4:28 PM To: Main PLUG discussion list plug-discuss@lists.plug.phoenix.az.us Subject: Re: correct way to set

Re: correct way to set timezone clock/date?

thing. That is just a guess though. Is anyone else here on a Cox cable modem able to sync to a external ntp server? -- Steve -Original Message- From: Steven A. DuChene linux-clust...@mindspring.com Sent: Aug 25, 2009 4:37 PM To: Main PLUG discussion list plug-discuss

Re: correct way to set timezone clock/date?

would function just fine. Why would ntpd connect and work fine but ntpdate will not function? -- Steve -Original Message- From: Steven A. DuChene linux-clust...@mindspring.com Sent: Aug 25, 2009 3:50 PM To: Alex Dean a...@crackpot.org, Main PLUG discussion list plug-discuss

Re: correct way to set timezone clock/date?

-discuss@lists.plug.phoenix.az.us Subject: Re: correct way to set timezone clock/date? Sounding to me like there might be a problem in your ntp.conf file. Can we have a look at it? Steven A. DuChene wrote: And after each of those lines shown below is a line that says: addto_syslog: configuration

RE: correct way to set timezone clock/date?

I did. I attached it to the last message you quoted below. Does this mailing list server strip off attachments? Even if they are just text? -Original Message- From: Bob Elzer bob.el...@gmail.com Sent: Aug 25, 2009 6:34 PM To: 'Steven A. DuChene' linux-clust...@mindspring.com, 'Main PLUG

RE: correct way to set timezone clock/date? SOLVED? (sort of)

OK, I think I found the problem with ntpd not getting any peers from my server list. I was starting ntpd from the command line with the following syntax: ntpd -I eth0 -D 4 -n eth0 is my internal network. I got to looking at the no interface found for... messages and thought I would try adding a

RE: correct way to set timezone clock/date? more info

- From: Steven A. DuChene linux-clust...@mindspring.com Sent: Aug 25, 2009 9:36 PM To: 'Main PLUG discussion list' plug-discuss@lists.plug.phoenix.az.us Subject: RE: correct way to set timezone clock/date? SOLVED? (sort of) OK, I think I found the problem with ntpd not getting any peers from my

RE: correct way to set timezone clock/date? more info

OK, I ran the ntpdate command within strace and got the output attached. It seems to be sitting there polling for something and never receiving a reply. At least that is what I see. Anyone else see anything different? Or have any idea why the poll never completes or gets a result? And what

RE: correct way to set timezone clock/date? more info

Umm, no ntpd seems to be working as expected (correctly?) now and as I said ntpdate is the only thing I have a problem now and that does not use the ntp.conf file at all. -Original Message- From: Bob Elzer bob.el...@gmail.com Sent: Aug 25, 2009 10:02 PM To: 'Steven A. DuChene' linux

Re: hp scanjet 3400c

I have a 3400C scanner and it works just fine with current versions of sane as packaged with Fedora9 and other Linux distributions. (sane is the scanning software for most if not all Linux desktop distros) -Original Message- From: betty nicepeng...@webcanine.com Sent: Aug 20, 2009 5:33 PM

Re: mysql_connect won't when run from web server

discussion list plug-discuss@lists.plug.phoenix.az.us Cc: Steven A. DuChene linux-clust...@mindspring.com Subject: Re: mysql_connect won't when run from web server Is your hostname mysql valid, just ping mysql and see if you get a response. Try to connect to localhost as well and see if it works. Most

Re: mysql_connect won't when run from web server

me. -Original Message- From: Joe j...@nationnet.com Sent: May 25, 2009 12:10 AM To: Steven A. DuChene linux-clust...@mindspring.com, Main PLUG discussion list plug-discuss@lists.plug.phoenix.az.us Subject: Re: mysql_connect won't when run from web server Is selinux enabled? If I remember

mysql_connect won't when run from web server

Hello all: I have a php to mysql database connection script that I am having a problem with. I have two systems. One is running apache and also happens to be my desktop system. Call this one system Apache. The other system is running mysql and let's call this one Mysql. the connection script

Re: mysql_connect won't when run from web server

) in /home/minime/public_html/testmysqlconnect_script.php on line 6 -Original Message- From: Steven A. DuChene linux-clust...@mindspring.com Sent: May 24, 2009 3:53 PM To: plug-discuss@lists.plug.phoenix.az.us Subject: mysql_connect won't when run from web server Hello all: I have a php to mysql

Re: mysql_connect won't when run from web server

But if that was the problem then the command line invocation on the Apache server should not work. I.E. if it was a port or firewall issue. Can't connect to MySQL server on 'Mysql' (13) in /home/minime/public_html/testmysqlconnect_script.php on line 6 Are you running in safe mode? Is

how to sanitize MS Word HTML output?

Hello all: My wife has a class sylibus file from one of her profs at MCC and the file is supposed to be html but it is that awful sort-of-html crap from MS-Office. It is filled with a lot of un-needed style and formating tags as well as all kinds of stupid extra characters due to some MS standard

Re: how to sanitize MS Word HTML output?

run into this and wants to clean up text or html output from MS Office. I tried searching through google and freshmeat but I must not be putting in the right search terms. -Original Message- From: Stephen cryptwo...@gmail.com Sent: May 4, 2009 10:50 AM To: Steven A. DuChene linux-clust

Re: how to sanitize MS Word HTML output?

Well somehow some brain-dead web designer at MCC has managed to put a Mime encoded syllabus online for their students. The actual file I downloaded had a *.mht file extension and contained in that was various bits of Mime encoded crap. One section was even base64 stuff. The bit I was able to

Re: how to sanitize MS Word HTML output?

Thanks for all of the links and info. If I run into this again I will know what to do. Until then I did find a Firefox extension called UnMHT that did a pretty damn good job at rendering the original file from the MCC website. -Original Message- From: Joseph Sinclair