Hold down the reset button for 120 seconds until the lights flash. Once
it's reset to factory settings, you can reflash your firmware (OpenWRT or
whatever).
Someone probably got into it (happens all the time).
If you can't reset her, she's toast.
http://performance.toast.net/
so after I reset it it will be like I just opened the package? which lights
will flash; all of them? at the same time or in sequence or will they like
flicker?
On Fri, May 15, 2009 at 11:11 AM, Lisa Kachold lisakach...@obnosis.comwrote:
Hold down the reset button for 120 seconds until the
I forgot to say that this router has been off for a little over a year.
around 12 months. this I know because I turned it off before I moved to
florida and I moved here at the end of this month.
On Fri, May 15, 2009 at 1:43 PM, mike havens bmi...@gmail.com wrote:
so after I reset it it will be
I figured out the problem. I have a specific DNS server and secondary.
I didn't realize there was a place in the router for that but they were
found. It's all cool now! Thanks.
On Fri, May 15, 2009 at 3:26 PM, Lisa Kachold lisakach...@obnosis.comwrote:
Knowing the right source is
I think my router is broken how do I verify this? I plug the modem into
the internet port of the router and the computer tries to connect to it but
then says 'limited or no connectivity'. I tried the 192.168.1.1 thing (to
look into the router settings), though I doubt that it has anything to
If you power the router on and hold the reset button for a while (I
think 5 seconds, but you will see all the lights flash or something
too), it'll reset the device to factory settings. Then you can access it
with admin/admin and set it up the way you want again.
Hope that helps.
-Joe
mike
--- On Thu, 5/14/09, mike havens bmi...@gmail.com wrote:
I think my router is broken how do I
verify this? I plug the modem into the internet port of the
router and the computer tries to connect to it but then says
'limited or no connectivity'. I tried the
192.168.1.1 thing (to look into
20 sec for linksys
On Thu, May 14, 2009 at 1:28 PM, Joe li...@joefleming.net wrote:
If you power the router on and hold the reset button for a while (I
think 5 seconds, but you will see all the lights flash or something
too), it'll reset the device to factory settings. Then you can access it
I reset the router.
I tried admin/blank. blank/admin, admin/admin.
Reset router again and again.
Repeaet user/pass.
Still can't get into the router.
After th 20 second reset now the browser goes to a
'management mode/ firmware upgrade' page.
On Thu, May 14, 2009 at 4:30 PM, Jason Holtzapple
T-Mobile
-Original Message-
From: mike havens bmi...@gmail.com
Date: Thu, 14 May 2009 16:14:30
To: Main PLUG discussion listPLUG-discuss@lists.plug.phoenix.az.us
Subject: linksys WRT54G router
---
PLUG-discuss mailing list - PLUG-discuss
@lists.plug.phoenix.az.us
Subject: Re: linksys WRT54G router
---
PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman/listinfo/plug-discuss
listPLUG-discuss@lists.plug.phoenix.az.us
Subject: linksys WRT54G router
---
PLUG-discuss mailing list - PLUG-discuss@lists.plug.phoenix.az.us
To subscribe, unsubscribe, or to change your mail settings:
http://lists.PLUG.phoenix.az.us/mailman
.
Mark
Sent via BlackBerry from T-Mobile
-Original Message-
From: mike havens bmi...@gmail.com
Date: Thu, 14 May 2009 16:14:30
To: Main PLUG discussion listPLUG-discuss@lists.plug.phoenix.az.us
Subject: linksys WRT54G router
-Original Message-
From: mike havens bmi...@gmail.com
Date: Thu, 14 May 2009 16:14:30
To: Main PLUG discussion listPLUG-discuss@lists.plug.phoenix.az.us
Subject: linksys WRT54G router
---
PLUG-discuss mailing list - PLUG-discuss
This would suggest a corrupt firmware, or chip...
at this point you can try an ope firmware or a new/updated firmware
from linksys.
If it is the chip stick a fork in it because it is done. (remove power
first unless you like unrestrained voltage)
if you feel like experimenting you cna try
settings
will be reset to factory settings.
Mark
Sent via BlackBerry from T-Mobile
-Original Message-
From: mike havens bmi...@gmail.com
Date: Thu, 14 May 2009 16:14:30
To: Main PLUG discussion listPLUG-discuss@lists.plug.phoenix.az.us
Subject: linksys WRT54G router
On Thu, May 14, 2009 at 1:14 PM, mike havens bmi...@gmail.com wrote:
but have no idea what the password or user name is (admin/admin didn't
work). Will anyone help me with this?
Name: admin
Password: no password
in my experience with linksys... CHANGE THEM AND WRITE THEM DOWN ON A SLIP
OF
17 matches
Mail list logo